BOOTPC(8)						      Debian GNU/Linux Manual							 BOOTPC(8)

NAME

       bootpc - bootp client

SYNOPSIS

       bootpc  [--bootfile  file]  [--dev  device]  [--verbose]  [--debug] [--server addr] [--hwaddr addr] [--returniffail] [--waitformore length]
       [--in2host addr] [--serverbcast] [--help]

DESCRIPTION

       This manual page documents briefly the bootpc command.  This manual page was written for the Debian GNU/Linux distribution (but may be used
       by others), because the original program does not have a manual page.

       bootpc is a boot protocol client used to grab the machine's IP address, set up DNS nameservers and other useful information.

OPTIONS

       --bootfile file
	      Tell the server to use file as the boot file.

       --dev device
	      Use device to communicate with the server.

       --verbose
	      Be verbose.

       --debug
	      Produce debugging output.

       --server addr
	      Use the IP address addr to communicate with the server.

       --hwaddr addr
	      Use addr as our hardware address rather than what the operating system gives us.

       --returniffail
	      Terminate the program if a failure occurs.  By default bootpc will ask the user to press a key if the request did not succeed.

       --waitformore length
	      Wait for more responses when one is received.  bootpc will wait for at most length seconds.  This is probably only useful for debug-
	      ging.

       --in2host addr
	      Takes an address and returns useful bits of the name after lookup, this was a separate program, but it is more compact to have  both
	      together.

       --serverbcast
	      Tell the server to send back a broadcast reply.  This is necessary on Linux 2.1 and 2.2.

       --help Display the usage of bootpc.

AUTHOR

       This manual page was written by Herbert Xu <herbert@debian.org>, for the Debian GNU/Linux system (but may be used by others).

BOOTPC
								  1999 March 21st							 BOOTPC(8)