05-28-2002
This might help - found on SunSolve. You can read it by going there and doing a search for "why same ether address on all interfaces"
IEEE leaves it up to the vendor to use the station address approach vs.
per port approach. Sun uses the concept of a host-based MAC identity prior
to the newer nic cards.
Usually this does not present a problem. Only systems on the same subnet
(connected to same switch/hub) are required to have unique hardware address
(arp entries).
If you are configuring a multi-homed host with more than one interface on the
same physical subnet (connections to same hub), choosing and configuring a
unique ether address that is different from the primary host-based assigned
ethernet Mac address may be neccessary.
The older network interface drivers in Sun systems get the MAC address for the
ethernet interface from the PROM on the system. The MAC address does not come from
the ethernet chip or interface hardware. There is just one ethernet MAC address for all
interfaces on a system. The intel (ie), lance (le )ethernet interfaces along with the
SunSwift (hme) and SunFastEthernet 1.0 (be) and 2.0 Adapters (hme) use the host assigned
address of the CPU OpenBoot PROM.
Sun Microsystems reserved ethernet range starts with 8:0:20:xx:xx:xx
7 More Discussions You Might Find Interesting
1. Solaris
Hi, is there a way in Solaris 8 to determine how many total NIC's say a Sun Sparc box has installed - plumbed or unplumbed - and find out its capable network speeds and MAC address?
I know ifconfig -a but that only shows the plumbed and used interfaces.
thx
cc (2 Replies)
Discussion started by: bigapple100
2 Replies
2. UNIX for Dummies Questions & Answers
Hello all.
I have a large number of text files outputted from various Netstumbler Wireless Scans; from which I need to extract the MAC addresses of the various Access Points.
The Text files look like this:
# $Creator: Network Stumbler Version 0.4.0
# $Format: wi-scan summary with... (9 Replies)
Discussion started by: dhs23
9 Replies
3. Shell Programming and Scripting
Hi,
i am working on a project where i have to write a script to find out MAC addresses of the systems with given IP address.
Can anybody tell me which command i can use to find MAC address if you know IP address of the machine.
Thanks (5 Replies)
Discussion started by: manmeet
5 Replies
4. UNIX for Dummies Questions & Answers
If a web search is done on this topic there are many links but no information included in the documents. So my questions are;
Why does a NIC card have it's own permanent ID. Why can't it share the host name? An ID is an ID.
Why does a computer need two ways to ID it.
If the network... (3 Replies)
Discussion started by: theKbStockpiler
3 Replies
5. IP Networking
Hi all,
Host - Ubuntu 12.04 desktop 64bit
Virtualizer - Oracle VirtualBox
2 NICs
Where can I find relevant document to set up 2 NICs, one for inward bound and another for outward bound, separate channel, both connected to the same router
Would following document be appropriate for my... (1 Reply)
Discussion started by: satimis
1 Replies
6. Shell Programming and Scripting
I have a problem with a script , i want to see my devices there are up in my network. I want as output the ip addresses of the devices and also the mac address but I only had the ip addresses
#!/bin/bash
while ]
do
-mac)
Extension=5
shift
mac=$1
shift
;;
esac... (1 Reply)
Discussion started by: Roggy
1 Replies
7. Shell Programming and Scripting
Hy over there,
Lets make it simple :)
Using a bash script, how to grep only the ip address and the mac address and put them in a file:.
for example from the dhcp.conf file we got such things:
The script will end up with two columns IP's and MAC adresses as it is showed below:
... (9 Replies)
Discussion started by: hermouche
9 Replies
LEARN ABOUT XFREE86
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)