You should leave all entries for the DHCP IP out of the hosts file unless you can statically assign an IP/hostname to the same host by MAC address. To find out what IP is attached to an interface, use:
The output will look something like this:
Ignore the lo interface with the 127.0.0.1 IP, look at the other.
Hi to all,
A real virgin to unix, so sorry for such a basic question.
Have a older unix terminal with crashed server. Software resides to terminal. Don't have network printing capabilities. I removed network printer and gone local, but don't know how to redirect the device for local... (3 Replies)
Dear Guys ,
Please again , i could not find a solution for my server linux red hat 9 .
when i leave it about more than 5 min ideal it goes to something like sleep mode and all services stop and even TCP/IP .. what shall i do ???
another thing please , when i installed the server , i gave... (3 Replies)
Hi all,
i am copying .gz files from production server to development server using
"scp" command.my requirement is after copying .gz files i want to delete old
.gz files(two days back) in development server from production server.
like this way i need to delelte .log ,.z and .dmp files... (3 Replies)
Hello. I am really new to Unix and am trying to set up a local printer on a FreeBSD 6.2 machine. I was able to get some kind of garbage by going lptest > /dev/lpt0, but after I set up the spooler I get nothing but page after page of nothing. I checked the kernel configuration and it had the correct... (1 Reply)
I do a ssh to remote host(A1) from local host(L1). I then ssh to another remote(A2) from A1.
When I do a who -m from A2, I see the "connected from" as "A1".
=> who -m
userid pts/2 2010-03-27 08:47 (A1)
I want to identify who is the local host who initiated the connection to... (3 Replies)
Hello everyone,
I have question how i can setup local ipv6 network ? Here is my network:
I have main ipv6 gw and server X for example that is connected with my main ipv6 gw and all ping6, traceroute6 is working. My local network is connected to one switch and main ipv4 gateway is that server X... (2 Replies)
Hi All,
I am trying setup a remote printer on a solaris 10 server. The printer is online and working fine is solaris 8. I have added the pritner to /etc/hosts file and /etc/printers.conf ... I need to know followings:
1. How do I find the default pritner port on the old solaris machine... (0 Replies)
Hello,
Greetings!!
I have a server with 3 TB of disk space and 12 GB RAM and a i7 processor.
What I did thus far is to install Oracle Enterprise Linux (OEL 5.7)as the host system and install Oracle Virtual box and created 3 VM's. Installed OEL 5.7 on one of the VM, working on installing... (1 Reply)
Hello guys,
I would like to develop a script which takes a host name as argument and displays a message whether the host is on the local network or not. How can I accomplish that? Is there a file or command that I can use to list all host on the local network? :confused: (4 Replies)
Discussion started by: Learn4Life
4 Replies
LEARN ABOUT MOJAVE
defaultrouter
defaultrouter(4) File Formats defaultrouter(4)NAME
defaultrouter - configuration file for default router(s)
SYNOPSIS
/etc/defaultrouter
DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s).
The format of the file is as follows:
IP_address
...
The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If
you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that
defaultrouter is read.
Lines beginning with the ``#'' character are treated as comments.
The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will
cause the default route added by the kernel to be deleted.
Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router.
You can use routeadm(1M) to override this behavior.
FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers.
SEE ALSO in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4)SunOS 5.10 17 Aug 2004 defaultrouter(4)