printing with my UltraSparc Post: 18063

6 More Discussions You Might Find Interesting

1. UNIX Benchmarks

Sun Blade 2000 UltraSparc III Solaris 8

Sun Blade 2000 UltraSparc III Solaris 8 Notes: prtdiag: System Configuration: Sun Microsystems sun4u SUNW,Sun-Blade-1000 (UltraSPARC-III+) System clock frequency: 150 MHZ Memory size: 3GB ==================================== CPUs ==================================== ...

2. Solaris

440 MHz problems in UltraSparc 5 Computer

Hi all, I recently purchased a 440 MHz processor module for my Sun Ultrasparc 5 computer. I installed the module, updated the boot prom to the most recent version and when the machine starts up the initial white screen shows I have a 333 MHz processor installed ! I checked the details of the...

3. Solaris

First posting Help :ULTRA 10 UltraSPARC-IIi 360MHZ

Hello Forum team members, I have a problem with ULTRA 10. It does not boot and just stops at this prompt. OpenBoot 3.19, 256 MB... Boot device:disk:a File and args: Need your help, Thanks in advance, Regards NV.

4. Hardware

UltraSPARC T2 or T2+

Hi everyone We've bought a Sun T5120 server recently. I'm currently investigating how much would cost to license the server. According to Oracle's matrix T2 processors are calculated at 0.75 per core, but T2+ processors are calculated at 0.50 per core. When I run prtdiag -v I get the...

5. Windows & DOS: Issues & Discussions

Linux to Windows Printing: PDF starts printing from middle of page.

We are using Red Hat. We have a issue like this: We want to print from Linux, to a printer attached to a Windows machine. What we want to print is a PDF. It prints, but the printing starts from the middle of the page. In the report, there is no space at the top but still printing starts from the...

6. UNIX for Dummies Questions & Answers

Sco Unix printing : jobs hangs in queue - printing via lp versus hpnpf

Hi, We have a Unix 3.2v5.0.5. I installed a printer via scoadmin, HP network printer manager with network peripheral name (hostname and ipadres are in /etc/hosts). This is the configuration file : Code: root@sco1 # cat configurationBanner: on:AlwaysContent types: simpleDevice:...

LEARN ABOUT MOJAVE

disable

enable(1)                                                          User Commands                                                         enable(1)

NAME

       enable, disable - enable/disable LP printers

SYNOPSIS

       /usr/bin/enable printer...

       /usr/bin/disable [-c | -W]  [ -r [reason]] printer...

DESCRIPTION

       The  enable  command  activates  printers,  enabling  them to print requests submitted by the lp command. enable must be run on the printer
       server.

       The disable command deactivates printers, disabling them from printing requests submitted by the lp command. By default, any requests  that
       are  currently  printing  on printer will be reprinted in their entirety either on printer or another member of the same class of printers.
       The disable command must be run on the print server.

       Use lpstat -p to check the status of printers.

       enable and disable only effect queueing on the print server's spooling system. Executing these commands from a client system will  have  no
       effect on the server.

OPTIONS

       The following options are supported for use with disable:

       -c              Cancels  any requests that are currently printing on printer. This option cannot be used with the -W option. If the printer
                       is remote, the -c option will be silently ignored.

       -W              Waits until the request currently being printed is finished before disabling printer. This option cannot be used  with  the
                       -c option. If the printer is remote, the -W option will be silently ignored.

       -r [reason]     Assigns  a  reason  for  the  disabling  of  the  printer(s). This reason applies to all printers specified. This reason is
                       reported by lpstat -p. Enclose reason in quotes if it contains blanks. The default  reason  is  "unknown  reason"  for  the
                       existing printer, and "new printer" for a printer added to the system but not yet enabled.

OPERANDS

       The following operand is supported for both enable and disable:

       printer         The  name of the printer to be enabled or disabled. Specify printer using atomic name. See printers.conf(4) for information
                       regarding the naming conventions for atomic names.

EXIT STATUS

       The following exit values are returned:

       0               Successful completion.

       non-zero        An error occurred.

FILES

       /var/spool/lp/*         LP print queue.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWpcu                      |
       +-----------------------------+-----------------------------+
       |CSI                          |enabled                      |
       +-----------------------------+-----------------------------+

SEE ALSO

       lp(1), lpstat(1), printers.conf(4), attributes(5)

SunOS 5.10                                                          9 Sep 1996                                                           enable(1)