03-20-2002
printing with my UltraSparc
I just got an HP 1200se printer. I have it networked using a single print server, so I'd really like to get it working with my Ultra10 system.
I know that there are no Solaris drivers, honestly, I don't know if HP puts out Solaris drivers for any of their stuff.
This printer, and I dunno what this means, supports PCL 5e, PCL 6 and PostScript 2 emmulation.
Can I get this printer working with my UltraSparc and how difficult will it be if it can be done?
6 More Discussions You Might Find Interesting
1. UNIX Benchmarks
Sun Blade 2000 UltraSparc III Solaris 8
Notes:
prtdiag:
System Configuration: Sun Microsystems sun4u SUNW,Sun-Blade-1000 (UltraSPARC-III+)
System clock frequency: 150 MHZ
Memory size: 3GB
==================================== CPUs ====================================
... (0 Replies)
Discussion started by: tnorth
0 Replies
2. Solaris
Hi all,
I recently purchased a 440 MHz processor module for my Sun Ultrasparc 5 computer. I installed the module, updated the boot prom to the most recent version and when the machine starts up the initial white screen shows I have a 333 MHz processor installed !
I checked the details of the... (2 Replies)
Discussion started by: usparche
2 Replies
3. Solaris
Hello Forum team members,
I have a problem with ULTRA 10. It does not boot and just stops at this prompt.
OpenBoot 3.19, 256 MB...
Boot device:disk:a File and args:
Need your help,
Thanks in advance,
Regards
NV. (7 Replies)
Discussion started by: narahv
7 Replies
4. Hardware
Hi everyone
We've bought a Sun T5120 server recently.
I'm currently investigating how much would cost to license the server. According to Oracle's matrix T2 processors are calculated at 0.75 per core, but T2+ processors are calculated at 0.50 per core.
When I run prtdiag -v I get the... (4 Replies)
Discussion started by: soliberus
4 Replies
5. Windows & DOS: Issues & Discussions
We are using Red Hat. We have a issue like this: We want to print from Linux, to a printer attached to a Windows machine. What we want to print is a PDF. It prints, but the printing starts from the middle of the page. In the report, there is no space at the top but still printing starts from the... (5 Replies)
Discussion started by: rohan69
5 Replies
6. UNIX for Dummies Questions & Answers
Hi,
We have a Unix 3.2v5.0.5.
I installed a printer via scoadmin, HP network printer manager with network peripheral name (hostname and ipadres are in /etc/hosts).
This is the configuration file :
Code:
root@sco1 # cat configurationBanner: on:AlwaysContent types: simpleDevice:... (0 Replies)
Discussion started by: haezeban
0 Replies
LEARN ABOUT SUNOS
disable
enable(1) User Commands enable(1)
NAME
enable, disable - enable/disable LP printers
SYNOPSIS
/usr/bin/enable printer...
/usr/bin/disable [-c | -W] [ -r [reason]] printer...
DESCRIPTION
The enable command activates printers, enabling them to print requests submitted by the lp command. enable must be run on the printer
server.
The disable command deactivates printers, disabling them from printing requests submitted by the lp command. By default, any requests that
are currently printing on printer will be reprinted in their entirety either on printer or another member of the same class of printers.
The disable command must be run on the print server.
Use lpstat -p to check the status of printers.
enable and disable only effect queueing on the print server's spooling system. Executing these commands from a client system will have no
effect on the server.
OPTIONS
The following options are supported for use with disable:
-c Cancels any requests that are currently printing on printer. This option cannot be used with the -W option. If the printer
is remote, the -c option will be silently ignored.
-W Waits until the request currently being printed is finished before disabling printer. This option cannot be used with the
-c option. If the printer is remote, the -W option will be silently ignored.
-r [reason] Assigns a reason for the disabling of the printer(s). This reason applies to all printers specified. This reason is
reported by lpstat -p. Enclose reason in quotes if it contains blanks. The default reason is "unknown reason" for the
existing printer, and "new printer" for a printer added to the system but not yet enabled.
OPERANDS
The following operand is supported for both enable and disable:
printer The name of the printer to be enabled or disabled. Specify printer using atomic name. See printers.conf(4) for information
regarding the naming conventions for atomic names.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
FILES
/var/spool/lp/* LP print queue.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcu |
+-----------------------------+-----------------------------+
|CSI |enabled |
+-----------------------------+-----------------------------+
SEE ALSO
lp(1), lpstat(1), printers.conf(4), attributes(5)
SunOS 5.10 9 Sep 1996 enable(1)