Sponsored Content
Full Discussion: basic networking
Special Forums IP Networking basic networking Post 17156 by manderson19 on Monday 11th of March 2002 08:39:40 PM
Old 03-11-2002
first of all, the example you gave is incorrect. if the first octet of the ip address starts with 192, then it is a class C address, not a class B. This means that the mask is 255.255.255.0 by default.

Second of all, you won't have 255 possible ip addresses, you will only have 254. The formula is 2 to the nth power - 2, where n represents the number of unmasked bits i.e., number of zeros in the fourth octet. the minus 2 is because you can't use zero (network number) and you can't use 255 (broadcast). However, some of your newer routers and switches will accomodate the zero network.

Third, if you are connecting computer to computer, make sure your cat 5 cable is a crossover cable, not a straight through or roll over. when connecting like devices, i.e., computer to computer, pin 1 is crossed to pin 3 and pin 2 is crossed to pin 6.

if you have any more questions, feel free to email me personally.

M.
 

8 More Discussions You Might Find Interesting

1. Slackware

Basic networking questions.

Hey, I'm new to Linux. I have a few questions about it. I run Slackware. After the installation the Linux installation had problems with my old hardware (network card, sound card) so I removed them and Linux would start. But now, I can't seem to use the network card in Linux because it's not... (3 Replies)
Discussion started by: RellioN
3 Replies

2. UNIX for Dummies Questions & Answers

Basic networking setup in unix

I have a SunOS 5.8 box and have always downloaded & applied patches via my PC, but I want to be able to go out to sunsolve directly from the console ... however, I guess it doesn't know the IP of our domain's DNS server or something. Where are these setting held on a Sun box??? (1 Reply)
Discussion started by: FredSmith
1 Replies

3. UNIX for Advanced & Expert Users

how ..........networking

hi everyone this is dipendra, i am interested in networking,i know simple socket programming . and now i am wonder to get in to audio socket. i have no clue how to build audio socket.so i am looking if u can provide me a link regarding the audio socket building tutorials. (1 Reply)
Discussion started by: dipendra_regmi
1 Replies

4. IP Networking

C networking

Can anybody help me regarding networking using c language i know how to capture the packets and to verify it`s protocol destination and source ip etc. Can anybody help me to direct a packet coming to an ip to some other ip of my choice ........ Hope reply ... (0 Replies)
Discussion started by: Sannair
0 Replies

5. IP Networking

Networking

Hi, I have a question on networking. I will try to ask with an example... Suppose i am googling something, as in searching something in the google page. In this case what I basically want to know is, does the client do a connect evrytime to the server whenever a search is done in google,... (1 Reply)
Discussion started by: naan
1 Replies

6. IP Networking

Basic networking please help

I am running Ubuntu Desktop and Ubuntu Server editions on two separate VMs. For the desktop I have set network adapters: Adapter 1: internal network called intnet Adapter 2: NAT Server: Adapter 1: internal network called intnet Now I'm suppose to set ip addresses which I'm pretty sure... (5 Replies)
Discussion started by: shadowcat
5 Replies

7. IP Networking

Basic networking question

Hii, Today morning I attended an interview, they had showed me the attached image and had few questions about that. The image shows a network with 4 nodes viz.. A B C & D and two switches(layer2) and a router(layer3). Just wanted to know can node A and node D would be on same network e.g... (4 Replies)
Discussion started by: zing_foru
4 Replies

8. IP Networking

Networking

hi From mt windows machine I can ping a LINUX machine but there is no arp entry for the same LINUX on my windows. How is it possible and what can I do to add the arp entry as I need it. thanks (1 Reply)
Discussion started by: leghorn
1 Replies
chxge(7D)							      Devices								 chxge(7D)

NAME
chxge - Chelsio Ethernet network interface controllers SYNOPSIS
/dev/chxge DESCRIPTION
The chxge Ethernet driver is a multi-threaded, loadable, clonable, STREAMS hardware driver supporting the connectionless Data Link Provider Interface, dlpi(7P), over Chelsio NIC controllers. Multiple (and mixed) NIC controllers installed within the system are sup- ported by the driver. The chxge driver provides basic support for the NIC hardware. Functions include chip initialization, frame transmit and receive, and error recovery and reporting. APPLICATION PROGRAMMING INTERFACE
The cloning, character-special device /dev/chxge is used to access NIC devices installed within the system. CHXGE AND DLPI
The chxge driver is dependent on /kernel/misc/gld, a loadable kernel module that provides the chxge driver with the DLPI and STREAMS functionality required of a LAN driver. See gld(7D) for more details on the primitives supported by the driver. The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are: o Default Maximum SDU is 1500 (ETHERMTU). o dlsap address length is 8. o MAC type is DL_ETHER. o The sap length value is -2, meaning the physical address component is followed immediately by a 2-byte sap component within the DLSAP address. o Broadcast address value is Ethernet/IEEE broadcast address (FF:FF:FF:FF:FF:FF). FILES
/dev/chxge Character special device. /kernel/drv/sparcv9/chxge SPARC chxge driver binary. /kernel/drv/chxge x86 platform kernel module. (32-bit). /kernel/drv/amd64/chxge x86 platform kernel module. (64-bit). ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |SPARC, x86 | +-----------------------------+-----------------------------+ SEE ALSO
netstat(1M), attributes(5), gld(7D), dlpi(7P), gld(9F), gld_mac_info(9S) SunOS 5.11 17 Jan 2005 chxge(7D)
All times are GMT -4. The time now is 11:48 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy