03-06-2002
LivinFree,
I tried accessing the /etc directory, but the system replies with Permission denied. I get the # sign when I try this, but when I enter a command it proceeds to the next line with the > symbol. Before the system gives the WARNING (initial message post) it tries to mount sd1g /usr/etc/fsck but it can't (there isn't a disk on that ID). Maybe there was a second disk in the machine and it was taken out before I received it? I think I'll move the disk to that ID and see what happens. After it attempts to mount the system replies with mount: giving up on: /usr Then says checking file systems /usr/etc/fsck: no such file or directory. I'm confused, maybe this is too much for a newblar like me ANY OTHER IDEAS?
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
If I want to access unix box via VPN tunnel,from windows box.
What sould I configure on the windows client PC, and what should I enable on the Unix Server box ?
I am using Solaris V10 intel platform, and I am using windows XP, and 2003 for client (0 Replies)
Discussion started by: zillah
0 Replies
2. UNIX for Advanced & Expert Users
Hi all,
I am generating a file on the Unix machine , now i want to FTP the same file to the NT machine.
how can i do that and the application currently upon which i am working is a JAVA based application.
I need your help.
regards
Ruchir (2 Replies)
Discussion started by: Ruchir
2 Replies
3. Shell Programming and Scripting
HI All,
I need a script to reboot a linux box from a windows box.
The script needs to run automatically whenever a sitescope alerts with an error message.
Have searched for this in the forums, but could not get something relative.
Pls. let me know the various alternatives we have to do... (2 Replies)
Discussion started by: Crazy_murli
2 Replies
4. UNIX for Advanced & Expert Users
i'm not much of an advanced unix programmer but I'm trying to write a script to access files on box1 after ssh from box 1 to box2. when ssh is invoked in the script i'm getting logged into box2 and losing complete touch with box1 which is normal i guess.
but my main aim with my script is when i... (3 Replies)
Discussion started by: pharos467
3 Replies
5. Solaris
I need to copy the printers currently installed on a Sol8 box to a Sol10 box. I tried copying the printers.conf file from the Sol8 box and that worked until I went through the file and changed the server name to that of the Sol10 box. Another post on this forum suggested copying the entire... (1 Reply)
Discussion started by: todis
1 Replies
6. Shell Programming and Scripting
Hello all !
I'm trying to write a shell script (bash) to ftp a file starting with particular name like "Latest_" that is present on a Windows box to UNIX server. Basically I want to set this script in the cron so that daily the new build that is posted on the Windows box can be downloaded to the... (2 Replies)
Discussion started by: vijayb4u83
2 Replies
7. Web Development
hi,
i have a list box , a text box and a button in a html form.
list box displays some values, when a user selects a value from the list box and press the button. the selected value should be copied to the text box value.
can any1 give me a html and javascript code to do this facility.
... (1 Reply)
Discussion started by: Little
1 Replies
8. Red Hat
Hi
I have a linux box and need to access from windows graphically
# uname -a
Linux pc-l416116 2.6.18-155.el5 #1 SMP Fri Jun 19 17:06:47 EDT 2009 i686 i686 i386 GNU/Linux
What components do I need to install on Linux and windows to do that?
TIA (6 Replies)
Discussion started by: magnus29
6 Replies
9. Shell Programming and Scripting
Team,
Presently I have a script, which i have set up cron on one of my Jump-boxes,and gives me the output on every hourly basis,fetching the data from the remote machine.Basically it gives me the list of all active users logged and its count once we execute the script.Here the count is... (6 Replies)
Discussion started by: whizkidash
6 Replies
10. How to Post in the The UNIX and Linux Forums
Hello my dear friends,
Two file are auto generated from mon - fri at different directories on same windows box.Every day i have to copy the file, rename it (specific name)and ftp it to linux box specified directory.
is it possible to automate this process,If yes this has to be done from windows... (1 Reply)
Discussion started by: umesh yadav
1 Replies
vfstab(4) File Formats vfstab(4)
NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO
fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)