Sponsored Content
Full Discussion: Move a disk to Sol. 2.6
Special Forums Hardware Filesystems, Disks and Memory Move a disk to Sol. 2.6 Post 15189 by sunshine on Monday 11th of February 2002 05:25:04 PM
Old 02-11-2002
I don't have the old system anymore. One of the 2 old drives was never used, however, the filesystem was mountable (I verified that before removing it). The other one was automatically mounted during startup. The old system was not running any database type program nor did it have any volume management software (Veritas) installed on it.

I am trying to avoid doing a format and restore on these drives though I do have a backup tape if format is the only solution.
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk... (2 Replies)
Discussion started by: Solaris
2 Replies

2. Solaris

Move root disk to new server

Hi, I need to do an installation where I have identical hardware at both sites and create the installation at one site and take the disk to the other site. Question: Do I need to do anything special for the OS to come up properly? thanks. (18 Replies)
Discussion started by: VirginiaSA
18 Replies

3. UNIX for Advanced & Expert Users

luupgrade: Sol 8 -> Sol 10 u7 (5/09)

Greetings Forumers! I ran into an issue after running luupgrade on v880 running Solaris 8. I want to upgrade to Solaris 10. When I rebooted the system I noticed the file systems listed as such: # df -h Filesystem size used avail capacity Mounted on /dev/dsk/c1t1d0s0 ... (2 Replies)
Discussion started by: bluescreen
2 Replies

4. Solaris

Disk free space planning for Sol 10 LU

I'm getting ready to start a LU from Sol 9 to Solaris 10. I want to ensure that I have enough disk space for future upgrades. What I don't know is what free space Solaris requires. If I have 10GB of free space in /opt, will Solaris 10 use that for a LU? Or, do I need to allocate 10GB of space... (5 Replies)
Discussion started by: zeekstern
5 Replies

5. Solaris

Move partition to new disk

Hi, The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them. Do I just need to edit the /etc/vfstab and point the /export/home... (1 Reply)
Discussion started by: run_time_error
1 Replies

6. Solaris

JASS - upgrading from Sol 9 to Sol 10

Do I need to reinstall/rerun JASS after upgrading from Sol9 to Sol10? Just wondered if the upgrade procedure overwrote any of the settings etc? (0 Replies)
Discussion started by: psychocandy
0 Replies

7. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies

8. UNIX for Dummies Questions & Answers

Move os from 1 disk to the other

Hi, I have server with 2 active disk, but disk 1 contain big part of os is falling, how can i move everything to disk 2 and then remove the disk 1? Thanks (4 Replies)
Discussion started by: prpkrk
4 Replies

9. Linux

Move OS to storage disk

Hi We have RHEL 7.3 running from local disk and we want to move it to storage. I am unable to find any proper procedure to do this activity. Please help. (4 Replies)
Discussion started by: powerAIX
4 Replies

10. Solaris

Move root disk to new identical hardware

We have in a couple of occasions moved root disk & flashcard in netra 240 to new identical hardware instead of replacing mb in dead server. Flashcard is to preserve mac adresses and mainly hostid for license stuff. Works without doing anything other than poweron & boot. Now we have a similar... (5 Replies)
Discussion started by: stockhes
5 Replies
svatophys(9r)															     svatophys(9r)

NAME
svatophys - General: Converts a system virtual address to a physical address SYNOPSIS
kern_return_t svatophys( vm_offset_t kern_addr, vm_offset_t *phys_addr ); ARGUMENTS
Specifies the kernel virtual address. Specifies a pointer to the physical address to be filled in. DESCRIPTION
The svatophys routine converts a system virtual address to the corresponding physical address. All address and data structure manipulation done within the kernel is performed using system virtual addresses. Typically, system virtual addresses are a means of mapping physical memory and I/O space, which often consists of device registers and DMA buffers. In contrast to this, devices are usually unaware of any virtual addressing and for this reason use physical addresses. You use the svatophys routine to perform this address translation. As an example of where you can use this address translation, a disk device driver can use DMA buffers to transfer blocks of data to the disk (for the case of a write operation). The data to be written to disk is present in system memory at a system virtual address known to the driver. To initiate the DMA operation, the disk driver can set up a command packet to specify a write operation to the underlying disk controller hardware. This write command packet contains (among other things) the location of the DMA buffer as a physical address and the length of the buffer. Here, the driver calls the svatophys routine to translate the system virtual address of the DMA buffer to a physical address in the command packet issued to the disk driver. RETURN VALUES
The svatophys routine returns the following: The address translation has been completed successfully. Unable to perform address transla- tion. This value indicates that the address specified by the kern_addr argument is not a valid kernel or system virtual address. svatophys(9r)
All times are GMT -4. The time now is 04:09 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy