WVDIAL(1)						      General Commands Manual							 WVDIAL(1)

NAME

       wvdial - PPP dialer with built-in intelligence.

SYNOPSIS

       wvdial --help | --version | --chat | --config | option=value | --no-syslog | section...

DESCRIPTION

       wvdial is an intelligent PPP dialer, which means that it dials a modem and starts PPP in order to connect to the Internet.  It is something
       like the chat(8) program, except that it uses heuristics to guess how to dial and log into your server rather than forcing you to  write  a
       login script.

       When wvdial starts, it first loads its configuration from /etc/wvdial.conf and ~/.wvdialrc which contains basic information about the modem
       port, speed, and init string, along with information about your Internet Service Provider (ISP), such as the phone number,  your  username,
       and your password.

       Then  it  initializes  your  modem  and	dials the server and waits for a connection (a CONNECT string from the modem).	It understands and
       responds to typical connection problems (like BUSY and NO DIALTONE).

       Any time after connecting, wvdial will start PPP if it sees a PPP sequence from the server.  Otherwise, it tries to convince the server	to
       start PPP by doing the following:

	- responding to any login/password prompts it sees;

	- interpreting "choose one of the following"-style menus;

	- eventually, sending the word "ppp" (a common terminal server command).

       If  all of this fails, wvdial just runs pppd(8) and hopes for the best. It will bring up the connection, and then wait patiently for you to
       drop the link by pressin CTRL-C.

OPTIONS

       Several options are recognized by wvdial.

       --chat Run wvdial as a chat replacement from within pppd, instead of the more normal method of having wvdial negotiate the  connection  and
	      then call pppd.

       --remotename
	      Override	the Remote Name setting in the dialer configuration section of the configuration file. This is mainly useful when you dial
	      to multiple systems with the same user name and password, and you don't want to use inheritance to override this setting	(which	is
	      the recommended way to do it).

       --config [configfile]
	      Run  wvdial  with configfile as the configuration file (instead of /etc/wvdial.conf). This is mainly useful only if you want to have
	      per-user configurations, or you want to avoid having dial-up information (usernames, passwords, calling card  numbers,  etc.)  in  a
	      system wide configuration file.

       --no-syslog
	      Don't output debug information to the syslog daemon (only useful together with --chat).

       --help Prints a short message describing how to use wvdial and exits.

       --version
	      Displays wvdial's version number and exits.

       wvdial  is  normally  run  without  command  line  options,  in which case it reads its configuration from the [Dialer Defaults] section of
       /etc/wvdial.conf.  (The configuration file is described in more detail in wvdial.conf(5) manual page.)

       One or more sections of /etc/wvdial.conf may be specified on the command line.  Settings  in  these  sections  will  override  settings	in
       [Dialer Defaults].

       For example, the command:
	      wvdial phone2

       will  read  default  options  from  the	[Dialer Defaults] section, then override any or all of the options with those found in the [Dialer
       phone2] section.

       If more than one section is specified, they are processed in the order they are given.  Each section will override all  the  sections  that
       came before it.

       For example, the command:
	      wvdial phone2 pulse shh

       will  read  default  options  from  the	[Dialer Defaults] section, then override any or all of the options with those found in the [Dialer
       phone2] section, followed by the [Dialer pulse] section, and lastly the [Dialer shh] section.

       Using this method, it is possible to easily configure wvdial to switch between different internet providers, modem  init  strings,  account
       names, and so on without specifying the same configuration information over and over.

BUGS

       "Intelligent"  programs are frustrating when they don't work right.  This version of wvdial has only minimal support for disabling or over-
       riding its "intelligence", with the "Stupid Mode", "Login Prompt", and "Password Prompt" options.  So, in general if you have a	nice  ISP,
       it will probably work, and if you have a weird ISP, it might not.

       Still,  it's  not much good if it doesn't work for you, right?  Don't be fooled by the fact that wvdial finally made it to version 1.00; it
       could well contain many bugs and misfeatures.  Let us know if you have problems by sending e-mail to <wvdial@nit.ca>.

       Also, there is now a mailing list for discussion about wvdial.  If you are having problems, or have anything else to say,  send	e-mail	to
       <wvdial-list@lists.nit.ca>.

       You  may  encounter  some  error messages if you don't have write access to /etc/ppp/pap-secrets and /etc/ppp/chap-secrets.  Unfortunately,
       there's really no nice way around this yet.

FILES

       /etc/wvdial.conf
	      Configuration file which contains modem, dialing, and login information. See

       /dev/ttyS*
	      Serial port devices.

       /etc/ppp/peers/wvdial
	      Required for correct authentication in pppd version 2.3.0 or newer.

       /etc/ppp/{pap,chap}-secrets
	      Contains a list of usernames and passwords used by pppd for authentication.  wvdial maintains this list automatically.

AUTHORS

       Dave Coombs and Avery Pennarun for Net Integration Technologies, as part of the Worldvisions Weaver project. We would like  to  thank  SuSE
       and RedHat for adding a number of various cool features to Thanks guys!

SEE ALSO

       wvdial.conf(5), wvdialconf(1), pppd(8), chat(8).

       FAQ:   http://www.dsb3.com/wvdial/

Worldvisions WvDial						     May 2001								 WVDIAL(1)