Scsi Disk Failed Post: 10603

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Move hard disk to another SCSI host

I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk...

2. UNIX for Dummies Questions & Answers

about hoe to add new scsi disk (unixware 7.1.1)

I have installed perc 2 raid card .in installiation , one is install whole for unix file system,and other select "do not modify" after installiation ,how to use another ? add filesystem ?how to?

3. Filesystems, Disks and Memory

SCSI disk spare sectors

Is there a way to determine the number of available spare sectors on a disk ? as it may be useful for notifying a user to take a backup of the disk before it runs into a medium error.

4. UNIX for Advanced & Expert Users

SCSI Disk

how can i determine what disks are scsi disks from the format command?

5. AIX

how to use a scsi disk??

hi, i removed a FC disk (it has a single VG on it) from a AIX 6.1 server and exported it to another AIX server. after doing cfgmgr -v .. the disk showed up in the second AIX 6.1 server. Now how can i see the data which is on the disk from the second AIX server.

6. UNIX for Advanced & Expert Users

Identifying generic scsi disk on AIX 5.3

I was wondering if anyone knew of any tools that would identify generic scsi disks on servers running AIX 5.3? Going through diag into the hot plugs does not work. I know it used to for 4.3 on some servers I managed with generic scsi but for some reason I either dont the option to choose a disk...

7. Solaris

Restoring dump from tape to SCSI disk

Hi Gurus, I need help. Mine is an Ultra 10 machine running on solaris 7. Problem with solaris 7 is, it can no longer recognize IDE disks greater that 10GB. My workaround is ro use an external SCSI disk since it is recognizable with solaris 7. I backup my filesystems (residing on the IDE...

8. SCO

i can't read hard disk scsi

i was installing i my computer windows xp and sco when i use knoppix5.0 live to read scsi partition wish sco was installing show me message that i have not permission to acces in scsi hard drive help me please

9. Solaris

Booting from wrong SCSI-disk. Error -256 Stack Underflow

Hi. I need to boot on Sun Blade 150 from scsi-disk, that ran on old Sun Ultra 10. It is necessary to take some the information from an old disk and something to study. The workstation is booted and I receive the following issue::mad: Sun Blade 150 (UltraSPARC-IIe 650MHz), No Keyboard (tip...

LEARN ABOUT CENTOS

installboot

installboot(1M) 														   installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk	       The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
		       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

	      example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
		   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

	   directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

	   second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

								    11 Apr 2005 						   installboot(1M)