Login or Register to Ask a Question and Join Our Community


UNIX for Dummies Questions & Answers

Help with IBM 550 and HMC settings

 
Thread Tools Search this Thread
Top Forums UNIX for Dummies Questions & Answers Help with IBM 550 and HMC settings
# 1  
Old 06-26-2007
Help with IBM 550 and HMC settings
I'm a Solaris and Debian/SuSE weenie, and I need some help setting the IP address of the remote web interface on an IBM 550

I plugged the port labled HMC1 to the network. The "network" is really a small linksys router that I use to test internet configs, as I can change the settings at will and not affect anyone. Anyway:
While leaving the settings for HMC1 at default (dynamic, 192.168.2.147 255.255.255.0) I changed the settings of HMC2 to static, 10.10.10.111 255.255.255.0 10.10.10.1 , and entered 2 DNS servers which are not reachable from where I am.

Now, I can't get a connection to either HMC1 or HMC2 (server taking too long to respond).
I can ping both the static IP on HMC2 and the dynamic IP of HMC1, which changed accordingly as the linksys is serving DHCP

So, the questions are:

Am I missing something?
Is there a way to set/reset the HMC IP configuration without access to the HMC GUI itself?
Is there a way to configure the HMC through the serial console?

Any help or guidance will be greatly appreciated.
Last edited by System Shock; 06-26-2007 at 09:12 AM..
 
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

IBM VIOS AIX HMC Error

hello P6 was managed by HMC, tried to install on it VIOS 2.2.6 and got this error message Hosting requires a hosting partition -- boot not permitted vios-4 - imgbb.com then after creating an lpar in HMC got this message B2001230 vios-3 - imgbb.com anyone know how to solve this... (3 Replies)
Discussion started by: filosophizer
3 Replies

2. UNIX for Beginners Questions & Answers

550 Access Error

Hi, we have a FTP server on vSphere on a windows 2008 server platform. One of our Unix machines now cannot send files to it, we checked permissions etc. Can login, when using put events.txt it gives a 550 Access Denied error. Nothing has changed from yesterday when it was working apart from... (1 Reply)
Discussion started by: RonT
1 Replies

3. AIX

IBM Virtual Machine OS on intel x86 and x64? IBM AIX OS on IBM Virtual Machine?

Hi There, I have zero information and zero knowledge for IBM virtual machine except Amazon cloud and VMware ESXi (Only Linux OS available). Anyone could provide me the following answer - Can IBM VM been deploy on X86 and X64 (Intel Chip)? If answer is yes any chance to deploy AIX OS... (13 Replies)
Discussion started by: chenyung
13 Replies

4. AIX

IBM's pSeries 570 vs a 520 vs 550

Hidey Ho Folks, Looking to buy a pServer for playing around with the IBM side of things. Looked around for a bit and notice that there is a significant price gap for the used 570's (Single Units) vs the 520's and 550's that folks are selling. Curious what to watch out for in either case? And... (6 Replies)
Discussion started by: Devyn
6 Replies

5. UNIX for Dummies Questions & Answers

550 5.7.1 Relaying denied During Send mail in UNIX

Hi , I am new to Send mail concept in UNIX , when ever am trying to send a mail am getting this errors , Could anyone please help me . reason: 550 5.7.1 .. Relaying denied (2 Replies)
Discussion started by: thana
2 Replies

6. UNIX for Dummies Questions & Answers

Sendmail error: 550 5.1.8 invalid/host-not-in-DNS

I have sendmail setup to relay through my external ISP. Everything was working fine until I started getting the error message (below). I don't what I did to cause this? I have read a number of related posts and it appears that I might need to configure the sending address of my server to appear... (0 Replies)
Discussion started by: simonmason
0 Replies

7. High Performance Computing

IBM Scheduler for High Throughput Computing on IBM Blue Gene P

A lightweight scheduler that supports high-throughput computing (HTC) applications on Blue Gene/P. (NEW: 06/12/2008 in grid) More... (0 Replies)
Discussion started by: Linux Bot
0 Replies

8. UNIX for Dummies Questions & Answers

ftp error 550 folder not found

Hi, I am having an ftp script(runs in HP unix server) that connect to another server where we have different folders named as email addresses(eg."anarayana@yahoo.com"). Then it goes to each folder and put the file in that folder. I found an error when remote folder is not created. "550... (1 Reply)
Discussion started by: lnarayana
1 Replies

9. SCO

Load 5.0.7 On A Dell Pe6350/550

I'am new to this and want to learn more. I would like to load SCO 5.0.7 on a dell poweredge 6350 with quad Xeon processors 3 drives with 2 meg mem, SCSI 7890, 7860 . the problem comes when ths software does its system check, confus it gets to a point, and shows F Bladinit , then stops and shuts... (1 Reply)
Discussion started by: PAT_RICK
1 Replies

10. UNIX for Advanced & Expert Users

sendmail : 550 host unknown

Hi I try to configure snedmail as smtp for my solaris box. if the useres are local there's no problem everything's working fine, but is it outside, sendmail says it could find the host. why?! all other tools find diffrent host? Could anyone tell me how I set up an easy mx ? So I test it with... (29 Replies)
Discussion started by: mrsaint
29 Replies
Login or Register to Ask a Question

LEARN ABOUT MOJAVE

curlopt_ftpport

CURLOPT_FTPPORT(3)					     curl_easy_setopt options						CURLOPT_FTPPORT(3)

NAME

       CURLOPT_FTPPORT - make FTP transfer active

SYNOPSIS

       #include <curl/curl.h>

       CURLcode curl_easy_setopt(CURL *handle, CURLOPT_FTPPORT, char *spec);

DESCRIPTION

       Pass a pointer to a zero terminated string as parameter. It specifies that the FTP transfer will be made actively and the given string will
       be used to get the IP address to use for the FTP PORT instruction.

       The PORT instruction tells the remote server to connect to our specified IP address. The string may be a plain IP address, a host  name,  a
       network	interface  name  (under Unix) or just a '-' symbol to let the library use your system's default IP address. Default FTP operations
       are passive, and thus won't use PORT.

       The address can be followed by a ':' to specify a port, optionally followed by a '-' to specify a port range.  If the port specified is	0,
       the  operating  system  will  pick  a  free port.  If a range is provided and all ports in the range are not available, libcurl will report
       CURLE_FTP_PORT_FAILED for the handle.  Invalid port/range settings are ignored.	IPv6 addresses followed by a port or portrange have to	be
       in brackets.  IPv6 addresses without port/range specifier can be in brackets.

       Examples with specified ports:

	 eth0:0
	 192.168.1.2:32000-33000
	 curl.se:32123
	 [::1]:1234-4567

       You disable PORT again and go back to using the passive version by setting this option to NULL.

       The application does not have to keep the string around after setting this option.

DEFAULT

       NULL

PROTOCOLS

       FTP

EXAMPLE

       TODO

AVAILABILITY

       Port range support was added in 7.19.5

RETURN VALUE

       Returns CURLE_OK if the option is supported, CURLE_UNKNOWN_OPTION if not, or CURLE_OUT_OF_MEMORY if there was insufficient heap space.

SEE ALSO

       CURLOPT_FTP_USE_EPRT(3), CURLOPT_FTP_USE_EPSV(3),

libcurl 7.54.0							 December 21, 2016						CURLOPT_FTPPORT(3)