Solaris

error <pid 347>: Server for display :0 terminated unexpectedly 1
/dev/fb: no such device or address
/dev/fb: No such device or address
Graphics Adapter device /dev/fb is of unknown type

Fatal server error:
Initoutput: Error loading module for /dev/fb

error <pid 347>: Server for display :0 terminated unexpectedly 1
error <pid 347>: Server for display :0 can't be started.
/user/openwin/bin/xset: bad font path element (#54), possible causes are:
Directory does not exist or has wrong permissions
directory missing fonts.dir
Incorrect font server address or syntax
Wanrning Null child found in argument list to unmanage

fbconfig -prconf outputs the following

Not a Configurable device.

all the systems were loaded from the same image this is the only one not working?

i did a fbconfig -list on a working system th config program is SUNWnfb_config on the non working system it says not configurable. so i did a package info and the drivers are there for the video?

Yes the driver is for video.
There is no device /dev/fb So the system can not configure it!

You install the system from a image not step by step ?
maybe there is an other graphic interface installed as on the other boxes?
Br joerg

all of them have the same graphics card. prtdiag -v
all have the same drivers installed as well

all 4 clients have the same hardware and software.

yes the clients were created from a image and loaded via jumpstart.

You have a console server/switch which simulates the Monitor?

Some times I have the same problem with flash jumpstart and simulated Monitor hardware. My quick and dirty solution was to use a monitor during the installation!

nope just a monitor on the unit

ls -ltr /dev/fb
on the box with the problem and on one without a problem!
Is this device available at the other solaris boxes?

boot -r to ensure that the system knows this device!

At the OK prompt:
On both boxes:
show-displays