network on solaris 10, through usb port...(urgent)

10 More Discussions You Might Find Interesting

1. Linux

Connect from USB to serial port of switch

I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID...

2. Shell Programming and Scripting

USB port events linstening

Hi everybody! :) I am a complete newbie. :D Is it possible to write a script (shell or python) to listen to usb port event and to notify me every time an usb storage key is plugged or ejected? I want it to echo the device to mount (eg. /dev/sdb). I wrote an udev rule wich runs a script after...

3. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports...

4. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

5. UNIX for Dummies Questions & Answers

Restarting/Resetting a USB Port?

Hello All, So I have been running into an issue with a USB Modem where if someone ends their dialin connection abruptly from the other side the modem gets stuck and I found that the only way to fix it is to either unplug the USB Modem and plug it back in, or just reboot. I'd rather not reboot...

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

7. UNIX for Advanced & Expert Users

how to watch the usb port

I want to watch the USB ports. If any device is connected to the USB port I want to take the name of the device and I want to log the device name. how to watch all the USB ports. How to find the device is connected in which usb port.

8. Solaris

Solaris Network Interface and USB Drive issues

Hi I had installed Sun Solaris 10 on my dell vostro 1400.Problem is iam unable to mount the usb drives as there was no detections at all.And also iam unable to find my network interface or iam not able to install the network card. If try to type ifconfig -a It is showing only loop back...

9. UNIX for Dummies Questions & Answers

USB port is disabled using BIOS, I want to enable it

Hi, I have PC with Linux OS RHEL3 and USB port is disabled from BIOS. BIOS access is protected using password. But, I have root access. Now, how can I enable USB port using root access? Is there any trick that I can do using root access that can enable USB port once my PC has booted up?

10. Solaris

Installing Solaris x86 through an external DVD drive through the USB port...

Is there a way to install Solaris 10 x86 with an external DVD drive that connects through the USB port? I would think I would run GRUB off of a floppy disk and somehow use that to make it look to the USB port to boot from but I don't know how to do that. Can anyone help me out?

Solaris