My server hots cannot contacted my array disk 2540 by using out-of-band Ethernet Cable.
The Controller Ethernet port is off , I replace the ethernet cable but not OK
I reboot the server and the Array disk 2540 but Not OK.
Please somebody know how to solve this issue?
Code:
State : Open
Acknowledged By : -
Auto Clear : Y
Aggregated Count : 1
Alarm Id : alarm3
Severity : Critical
Type : 2540.CommunicationLostEvent
Topic : OutOfBand
Event Code : 70.12.31
Date : 2015-11-26 07:44:19
Device : gsm_array[SUN.7056265.SX30200949]
Description : Lost out-of-band communication with 2540 gsm_array
State : Open
Acknowledged By : -
Auto Clear : Y
Aggregated Count : 0
Hi Guys,
I have situation here ...
server M4000 server lost connectivity to storagetek 2540
, storagetek 2540 unable to be ping.From DAS URL the storage is undetected.
Any idea why this is happening. Please share.
Thank you.
Raj (1 Reply)
I have questions about lslv attributes.
- The higher "IN BAND" %, the better intra-allocation policy met, correct?
- Edge is the fastest I/O and Inner-Edge is the slowest (edge : middle : center : inner-middle : inner-edge), correct?
- Is it possible to change DISTRIBUTION manually to get... (2 Replies)
Bought a Sun StorageTek 2540 SAN array a few years ago from a company that was going out of business. When we first set it up, we were able to get all the software (Common Array Manager) and firmware directly from Sun.
We just upgraded the drives, but the array is too large for the firmware. Now... (6 Replies)
I want to pass this array as a parameter.
IFS=$'\n'
fortune_lines=($(fortune | fold -w 30 ))
Inside of this line
screen -p 0 -S ${SCREEN_SESSION} -X stuff "`printf "say ${fortune_lines}\r"`"
And I am lost at this point.
I am thinking something like this?
Then make it loop..
... (7 Replies)
Hi Im' trying to output a list of files then make the list files as choices, need someone to give me hand.
so far here is what i got.. a bit messy
#!/bin/sh
menu_str=`ls -1 file*`
cnt=0
for i in $menu_str
do
menu_item=${i}
cnt=$(($cnt+1))
echo $cnt
echo ${menu_item
}
done
... (3 Replies)
Hi,
We have 12x1TB SATA disks in our array and I need to create 10TB volume. I defined new storage profile on array and when I tried to add volume, I faced with ~2TB limit for new volumes. I didn't find how to set another limit on my storage profile. Is there is a way to configure one large... (3 Replies)
I can't seem to get my host to see a 2540 array.
I have 3 arrays right now. (2) 2540's.. let's call them 2540A and 2540B and (1) 6140. 2540A and the 6140 are configured and mounted on the same linux host.
For the life of me, I cannot get the other problem-child 2540B to be recognized by the... (6 Replies)
I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it.
I have one StorageTek 2540 array that I would like to connect to the T2000.
For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
