SVM metastat -- needs maintenance

10 More Discussions You Might Find Interesting

1. Solaris

Metastat shows state needs maintenance

Hi, We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level...

2. Solaris

metastat |grep Needs

Dear, Required an script such that : If metastat |grep Needs , results in some output then this command to be executed for the same : opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line" With regards, Mjoshi

3. Shell Programming and Scripting

Grep contents from metastat command

Hi, after issuing metastat command I am getting output as follows Actually these soft partitions are more than 100. I want output as Device Name & Size. for eg d4004 2.0 GB

4. Solaris

restore metastat configuration after solaris upgrade

Greetings How can i restore metastat db after a solaris upgrade (9 to 10)? will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file? root@netad# metastat d35: Mirror Submirror 0: d38 State: Okay Submirror 1: d39 State: Okay Pass:...

5. Solaris

SVM Solaris 8 Problem. Metastat output looping

Hi friends, I'm newbie to SVM. Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :( the steps i've taken is as below:- 1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2 2.metadb -a -c 3 -f c1t0d0s7...

6. Solaris

Metastat shows "maintenance" and "last-erred"

Hi All, Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute! I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks. Now everything is working fine and we've had no downtime or...

7. Solaris

Softpartition State: Errored in Command MetaStat

Hi people, I have on problem when execute the command METASTAT... d60: Soft Partition Device: d10 State: Errored Size: 12582912 blocks (6.0 GB) Someone help me? Thank you very much

8. Filesystems, Disks and Memory

What should I do with this metastat result? metareplace everything?

I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result: d6 is dying with iostat -nE returns Harderror 3, Transports error 9 Can some offer me some help? Thank you very much.

9. Solaris

SVM - metastat - Last Erred

My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help. I checked the log in /var/adm/message: I also checked with the command iostat -nE. It returns: Metastat returns the followings: What should i do now?...

10. Solaris

Help on metastat

hi all, can someone pls pass on your suggestion? Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'....

LEARN ABOUT DEBIAN

svm-landscape

SVM-LANDSCAPE(1)						   User Commands						  SVM-LANDSCAPE(1)

NAME

       svm-landscape - Command line interface to svm-landscape in mlpy (version 2.2.0)

SYNOPSIS

       svm-landscape [options]

OPTIONS

       -h, --help
	      show this help message and exit

       -d FILE, --data=FILE
	      data - required

       -s, --standardize
	      standardize data

       -n, --normalize
	      normalize data

       -k K   k for k-fold cross validation

       -c SETS PAIRS
	      sets and pairs for monte carlo cross validation

       -S, --stratified
	      for stratified cv

       -K KERNEL, --kernel=KERNEL
	      kernel: 'linear', 'gaussian', 'polynomial', 'tr' [default linear]

       -P KPARAMETER, --kparameter=KPARAMETER
	      kernel parameter (two sigma squared) for gaussian and polynomial kernels [default 0.1]

       -o COST, --cost=COST
	      for cost-sensitive classification [-1.0, 1.0] [default 0.0]

       -m MIN, --min=MIN
	      min value for regularization parameter [default -5]

       -M MAX, --max=MAX
	      max value for regularization parameter [default 5]

       -p STEPS, --steps=STEPS
	      steps for regularization parameter [default 11]

       -e SCALE, --scale=SCALE
	      scale for regularization parameter: 'lin' or 'log' [default log]

       -l, --lists
	      Canberra distance indicator

       -a, --auc
	      Wmw_auc metric computation

mlpy								     July 2010							  SVM-LANDSCAPE(1)

Solaris