9 More Discussions You Might Find Interesting
1. Hardware
As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1.
I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
2. Solaris
Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a... (11 Replies)
Discussion started by: psantinello
11 Replies
3. Solaris
Hi,
Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup.
Regards,
Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies
4. AIX
Good day,
I have an rs/6000 server, model 7044-270. I bought a 2nd hard drive for it but im not sure its the right one. (fru:H13060) As you surely know, the 7044-270 hard drives are put in some sort of tray/carrier. There is a cable that will interface the HDD with the tray/carrier so the... (0 Replies)
Discussion started by: Netghost
0 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
7. UNIX for Dummies Questions & Answers
Hi,
Can someone answer to my question.I' totally new to Unix.
What is the command for removing the hard drive from the system?
Thanks a lot,
Puja (2 Replies)
Discussion started by: pujathakral
2 Replies
8. SCO
I trying to learn Unix and I am using SCO Unixware 7.1. Below are three question that I have:
1) Can someone tell me what command I can use to find out the system processor speed.
2) Can someone tell me what command I can use to find out what's the hard drive size of my unix box.
3) Can... (1 Reply)
Discussion started by: etaup02
1 Replies
9. UNIX for Dummies Questions & Answers
What are the options on upgrading disk space in an Ultra 10 workstation? Sun states they are EIDE drives, are they standard or Sun specific?
Thanks (1 Reply)
Discussion started by: 98_1LE
1 Replies
RARPD(8) System Manager's Manual RARPD(8)
NAME
rarpd - reverse address resolution protocol daemon
SYNOPSIS
rarpd [-v] [-i interface ]
DESCRIPTION
Rarpd listens on the ethernet for broadcast packets asking for reverse address resolution. These packets are sent by hosts at boot time to
find out their IP address. Rarpd looks up the six octet ethernet number in the ethers map finding a host name. This name is translated to
the IP address of the host by a DNS lookup. The IP address is then sent to the host.
Before rarpd can start its service it first finds out what the IP address and hardware address of the ethernet is.
Warning! Sun diskless workstations assume that the first RARP server that answers is the host they are to boot from. For this to work all
other Sun RARP servers delay their answer if they are not also the requestors boot server. This rarpd does not have this kludge so it will
happily engage the Sun boot server to see who can answer the client first. Unless your host can actually serve a Sun diskless client, it
is better not to list any more hosts in the ethers file than necessary.
OPTIONS
-v Be verbose. Show requests which the daemon is responding to.
-i Bind to the named interface. By default rarpd binds to the default interface for the local system type, if available.
SEE ALSO
ifconfig(8), ethers(5), hosts(5),
AUTHOR
Derrick J. Brashear (shadow@dementia.org)
The man page is mostly from the Minix version, by Kees J. Bot (kjb@cs.vu.nl)
RARPD(8)