interface down notice is coming

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Adding a network interface to a bonded interface

I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without...

2. IP Networking

Need a bridge from an ethernet interface to a serial interface

This is my situation DOS pc serial cable (sl0) Linux Pc eth1 192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router) I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface. ...

3. SCO

Change SCO - GUI or Desktop interface to DOS based interface

Hi all I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface? If you have any ideas, please tell me then. Thank you

4. Solaris

Command line Interface or GUI Interface not shown on solaris

Dear all, I am a newbie in solaris and I need your advice. I have a Solaris version 5.9 installed on Sunfire V240. I am able to ssh the machine from putty remotely. My problem is that I cannot see the display from KVM switch I have connected to it. I need also to be able to see the GUI...

5. UNIX for Dummies Questions & Answers

short notice

Im getting stumped on one of my unix problems. Im a college student taking unix and for one of my assignments I am to write a few programs. I done the programs but on one of them I have to modify it by using sed instead of a while do loop. here's the while loop while do ...

6. UNIX for Advanced & Expert Users

NOTICE:Cha

Pls can u help me diagnosed this Notice l receive during booting of my openserver 5.0.4 unix from the kernel. NOTICE:cha:SCSI bus has been reset ha=0 Attached SCSI peripherals will retunr to power up state (ChaN04) NOTICE:cha:SCSI command timed out ha=0...

7. Post Here to Contact Site Administrators and Moderators

Anybody Notice a Speed Increase?

Hi. I moved this site to a T3 facility and wanted to know if any of the long time users noticed a performance improvement? Thanks, Neo.

LEARN ABOUT CENTOS

gsl-config

GSL(1)							      General Commands Manual							    GSL(1)

NAME

       gsl-config - script to get version number and compiler flags of the installed GSL library

SYNOPSIS

       gsl-config [--prefix]  [--version] [--libs] [--libs-without-cblas] [--cflags]

DESCRIPTION

       gsl-config  is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs
       that use GSL. It is also used internally to the .m4 macros for GNU autoconf that are included with GSL.

OPTIONS

       gsl-config accepts the following options:

       --version
	       Print the currently installed version of GSL on the standard output.

       --libs  Print the linker flags that are necessary to link a GSL program, with cblas

       --libs-without-cblas
	       Print the linker flags that are necessary to link a GSL program, without cblas

       --cflags
	       Print the compiler flags that are necessary to compile a GSL program.

       --prefix
	       Show the GSL installation prefix.

SEE ALSO

       gtk-config(1), gnome-config(1)

COPYRIGHT

       Copyright (C)  2001 Christopher R. Gabriel

       Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, pro-
       vided  that  the  above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in sup-
       porting documentation.

								    22 May 2001 							    GSL(1)

Solaris