Login or Register to Ask a Question and Join Our Community


Solaris

How to find missing disks on Sun x4150 without reboot?

 
Thread Tools Search this Thread
Operating Systems Solaris How to find missing disks on Sun x4150 without reboot?
Prev   Next
# 1  
Old 05-05-2011
How to find missing disks on Sun x4150 without reboot?
Hi, Here is the issue: There are 4 disks on this Sun x4150 system under Solaris 10, but only 1 disk can be seen by the OS. I've tried commands disks and devfsadm but not working. It's an important production server, so 'reboot -r' is not a choice.

Code:
# format < /dev/null
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <DEFAULT cyl 35666 alt 2 hd 255 sec 63>
          /pci@0,0/pci8086,25f8@4/pci108e,286@0/disk@0,0
Specify disk (enter its number):
 
# iostat -E
sd0       Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: TSSTcorp Product: CD/DVDW TS-T632A Revision: SR03 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
sd1       Soft Errors: 2 Hard Errors: 0 Transport Errors: 0
Vendor: Sun      Product: STK RAID INT     Revision: V1.0 Serial No:
Size: 293.39GB <293391564288 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0
 
# cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 disk         connected    configured   unknown
pcie32                         etherne/hp   connected    configured   ok
usb0/1                         unknown      empty        unconfigured ok
usb0/2                         unknown      empty        unconfigured ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         usb-device   connected    configured   ok
usb2/1                         unknown      empty        unconfigured ok
usb2/2                         unknown      empty        unconfigured ok
usb3/1                         unknown      empty        unconfigured ok
usb3/2                         unknown      empty        unconfigured ok
usb4/1                         usb-storage  connected    configured   ok
usb4/2                         unknown      empty        unconfigured ok
usb4/3                         unknown      empty        unconfigured ok
usb4/4                         unknown      empty        unconfigured ok
usb4/5                         unknown      empty        unconfigured ok
usb4/6                         usb-hub      connected    configured   ok
usb4/6.1                       unknown      empty        unconfigured ok
usb4/6.2                       unknown      empty        unconfigured ok
usb4/6.3                       unknown      empty        unconfigured ok
usb4/6.4                       unknown      empty        unconfigured ok
usb4/7                         unknown      empty        unconfigured ok
usb4/8                         unknown      empty        unconfigured ok

Thank you in advance!
 
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Missing ASM Disks in Solaris 11.3 LDOM

Hi Guys, Just a quick question hopefully someone will have seen this before and will be able to enlighten me. I have been doing some Infrastructure Verification Testing and one of the tests was booting the primary domain from alternate disks, this all went well - however on restarting one of... (7 Replies)
Discussion started by: gull04
7 Replies

2. Solaris

Disks missing from /devices folder. Not sure why.

Help Please! I picked up a V440 and it has 4 disks. I installed Solaris fine to disk 3, but I cannot see the other disks in Solaris. I have run probe-scsi-all from OBP and I see the other disks and they have names in devalias AFAIK. It's just in Solaris they do not appear. I have run... (6 Replies)
Discussion started by: greg1975
6 Replies

3. Solaris

Solaris 10 Installation - Disks missing, and Raid

Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes. Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Discussion started by: msarro
2 Replies

4. Fedora

Missing entries in log files just before/after reboot

Hello world, One of the servers, a Fedora one,rebooted today (Luckily, a testbox). I tried to get the reason the server rebooted. After going through the messages, I think that the log entries just before and after reboot are missing. Please below: (****** is the server name, for privacy... (0 Replies)
Discussion started by: satish51392111
0 Replies

5. Solaris

Upgrade Sun x4150 ELOM issue

Hi, I was trying to upgrade firmware for this Sun x4150 from ELOM to ILOM. I did it under GUI ELOM Manager > Maintenance > Firmware Upgrade. It then showed 'Someone is upgrading firmware' and took forever. I believe its hung due to unknown reason (wrong file used?). I poweroff and poweron the... (4 Replies)
Discussion started by: aixlover
4 Replies

6. Solaris

Reboot causes disks in Resync State

Dear Team, This time i am facing some new problems which is beyond my thinking. I need some expert advice. We are having 4 Servers ( 2 nos Sun SPARC Enterprise T5220 & 2 nos of SF e2900 Servers ). Both the T5220 Servers are Termed as Node A and Node B . The same things are followed with... (1 Reply)
Discussion started by: sudhansu
1 Replies

7. Red Hat

missing raid array after reboot

Dear all , i ve configured raid 0 in redhat machine(VM ware), by following steps: #mdadm -C /dev/md0 -l 0 -n 2 /dev/sdb1 /dev/sdc1 #mkfs.ext3 /dev/md0 #mdadm --detail --scan --config=mdadm.conf >/etc/mdadm.conf then mounted the/dev/md0 device and also added a entry in fstab. how... (2 Replies)
Discussion started by: sriniv666
2 Replies

8. Solaris

disks - Sun Enterprise 220R and SF 280R

Hi, I have SE 220R with 2 disks mirrored using SVM and running OS - solaris 9. Because of performance issues on 220R I'd like to move the OS/application data to SF 280R. Having found that SF280R will only support Fiber channel disks, I am now wondering how to move complete data from SCSI... (3 Replies)
Discussion started by: upengan78
3 Replies

9. UNIX for Advanced & Expert Users

Sun internal disks and HBA card

I have a V490 that has couple internal disks attached to the same dual-port HBA card that I'm planning attach to the SAN for additional storage. Would I sacrifice performance if I use the same HBA? Is it better to throw in a new HBA instead? (1 Reply)
Discussion started by: kiem
1 Replies
Login or Register to Ask a Question