Login or Register to Ask a Question and Join Our Community


Solaris

T5220

 
Thread Tools Search this Thread
Operating Systems Solaris T5220
Prev   Next
# 1  
Old 04-14-2011
T5220
Hi Guys and Gals,
Wondering if anyone could help me, tricky one this.


Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc.

But no matter what version of Solaris 10 you use, when you do a boot cdrom it then throws it's output back to the virtual console.

Anyone got any ideas?


thanks in advance

Martin
 
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Where are my other disks on T5220 ?

Hi, I got a (used) server to install Solaris 11 and wipe out every information on existing disks. There are 6 disks of 300GB and two disks of 146GB. I am not able to figure out, how to find out RAID (if there is any) and break it. Can anybody help me with that ? Below is configuration. I have... (18 Replies)
Discussion started by: solaris_1977
18 Replies

2. Solaris

T5220

Hello guys, can anyone give me some advice on how to perform clean installation of Solaris 10 on T5220 ? I am connected with serial management port on the machine, i have the ok promt and now i should eject the dvdrom to insert Solaris dvd into and start the clean install. So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies

3. Solaris

Jumpstart Issues With T5220

I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4). The Facts: V210 - Solaris 10 (September 2010 Release / not patched) T5220's - Archive's created using prior (unknown) version of solaris 10. Flar -i <archive name> shows the... (6 Replies)
Discussion started by: Celtic_Monkey
6 Replies

4. Solaris

ILOM problem on T5220

I have setup my T5220 ILOM .. and its working fine. But if my network connection is broken to the ILOM i 'm unable to login to the ILOM for few hrs .. it gives me either wrong user/passwd error and after few hrs the same user/passwd works .. what could be the reason for this and how can i resove... (3 Replies)
Discussion started by: fugitive
3 Replies

5. Solaris

Set up new T5220 remotely

I have a new T5220 racked at our remote office and the guys who racked it does not know how to configure the SP on the system .. is there any way i can do it remotely ? (1 Reply)
Discussion started by: fugitive
1 Replies

6. Solaris

T5220 server

Hi, We have two T5220 servers in our datacentre one server is showing 64 processors online and another showing 32 processors online two are newly purchased, there is no hardware faults in this server one server has 64gb memory and it shows 64 processors, and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies

7. Solaris

LDOMs on T5220

We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid? I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Discussion started by: JerryHone
9 Replies

8. Solaris

SC on T5220 not responding

Hi, SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc sc> console -f Enter #. to return to ALOM. (2 Replies)
Discussion started by: fugitive
2 Replies

9. Solaris

ILOM and sc on T5220

I 've 2 different T5220 and both are showing different prompts when i ssh to the console. 1. Shows sc> ALOM 2. Shows -> ILOM as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ? and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies

10. Solaris

kstat on T5220

We used kstat on netra240/440 to check if the link is full duplex. So we do something like: bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2 2 The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems. However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies
Login or Register to Ask a Question

LEARN ABOUT CENTOS

openpgp-tool

OPENPGP-TOOL(1) 						   OpenSC Tools 						   OPENPGP-TOOL(1)

NAME

       openpgp-tool - utility for accessing visible data OpenPGP smart cards and compatible tokens

SYNOPSIS

       openpgp-tool [OPTIONS]

DESCRIPTION

       The openpgp-tool utility is used for accessing data from the OpenPGP v1.1 and v2.0 smart cards and compatible tokens like e.g. GPF
       CryptoStick v1.x, which might not be present in PKCS#15 objects but available in custom files on the card. The data can be printed on
       screen or used by other programs via environment variables.

OPTIONS

       --exec prog, -x prog
	   Execute the given program with data in environment variables.

       --help, -h
	   Print help message on screen.

       --raw
	   Print values in raw format, as they are stored on the card.

       --pretty
	   Print values in pretty format.

       --user-info, -U
	   Show card holder information.

       --reader num, -r num
	   Use the given reader. The default is the first reader with a card.

       --verify pintype
	   Verify PIN (CHV1, CHV2 or CHV3).

       --pin string
	   The PIN text to verify.

       --gen-key ID, -G ID
	   Generate key. Specify key ID (1, 2 or 3) to generate.

       --key-length bitlength, -L bitlength
	   Length (default 2048 bit) of the key to be generated.

       --version, -V
	   Print the version of the utility and exit.

       --verbose, -v
	   Verbose operation. Use several times to enable debug output.

       --wait, -w
	   Wait for a card to be inserted.

AUTHORS

       openpgp-tool utility was written by Peter Marschall <peter@adpm.de>.

opensc								    06/17/2014							   OPENPGP-TOOL(1)