Login or Register to Ask a Question and Join Our Community


Solaris

Solaris 10 SCSI card question

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Solaris 10 SCSI card question
# 8  
Old 11-24-2009
you can't see if it is correctly terminated... you have to check it's done! this is hardware. read here:
SCSI Termination Tutorial
# 9  
Old 11-24-2009
Here is the output from cfgadm -a. As you can see c1 and c2 is the one installed.

Code:
cfgadm -a
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c0::dsk/c0t0d0                 disk         connected    configured   unknown
c0::dsk/c0t1d0                 disk         connected    configured   unknown
c0::dsk/c0t2d0                 CD-ROM       connected    configured   unknown
c1                             scsi-bus     connected    unconfigured unknown
c2                             scsi-bus     connected    unconfigured unknown
usb0/1                         usb-kbd      connected    configured   ok
usb0/2                         usb-mouse    connected    configured   ok
usb1/1                         unknown      empty        unconfigured ok
usb1/2                         unknown      empty        unconfigured ok
usb2/1                         unknown      empty        unconfigured ok
usb2/2                         unknown      empty        unconfigured ok
usb2/3                         unknown      empty        unconfigured ok
usb3/1                         unknown      empty        unconfigured ok
usb3/2                         unknown      empty        unconfigured ok
usb4/1                         unknown      empty        unconfigured ok
usb4/2                         unknown      empty        unconfigured ok
usb4/3                         unknown      empty        unconfigured ok
usb4/4                         usb-storage  connected    configured   ok
usb4/5                         usb-storage  connected    configured   ok

Last edited by DukeNuke2; 11-25-2009 at 04:20 AM..
# 10  
Old 11-25-2009
Hello,

Please use the below commnads and it's better to mention the Solaris version.
Code:
#devfsadm
#drvconfig

Please wait for few moments. Check the things happened correctly by using format command.

Thanks,
Deepak
# 11  
Old 11-25-2009
Thanks a lot guys.

When I try drvconfig comman it is trying to sync with array and getting the following error messages in the loop. Do you have any idea?


>got SCSI bus
> glm0: fault detected in device; service still available

---------- Post updated at 10:20 AM ---------- Previous update was at 08:39 AM ----------

Also, when I boot the server it is not loading. The following error message is comming.

>got SCSI bus
> glm0: fault detected in device; service still available

Any idea? Thanks in advance.
# 12  
Old 11-25-2009
try to make a drawing of your setup... maybe we can find an error in your configuration.
# 13  
Old 11-26-2009
Here is the setup.

In the D1000 ARRAY I have U cable connecting between SCSI A to SCSI B.

IN the boxes, both are connected to SCSI channel A.

Am I missing anything here? Thanks a lot all of you.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

A question about scsi termination

http://ep.yimg.com/ay/iercomputer/ibm-39j5022-ultra320-scsi-adapter-dual-channel-pci-x-fc5736-3.gif I have bought this controller. Simple and fast question: I will put on this controller a external LTO tape,which is terminated with a terminator. I have to put another terminator on PCI-controller... (1 Reply)
Discussion started by: Linusolaradm1
1 Replies

2. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

3. Solaris

Solaris, SCSI M.O Drive on x86

Hi, i'm trying to install a MO Disk Drive Sony model: SMO-f541, to read a 2.6gb Magneto Optical Disk, I install Solaris 10 in a x86 machine with these specifications: Desktop Board Intel*D946GZIS Intel core 2 duo 4300, 80ghz Ram 2038 hard disk 250 gb I have a PCI SCSI card AHA-2940UW, At the... (0 Replies)
Discussion started by: Jevivre
0 Replies

4. Solaris

Clone scsi disc solaris 8

I have a SunOS 5.8 Generic_108528-29 sun4u sparc SUNW,UltraAX-i2, i have 2 scsi disk, the first with the S.O. and the second free. I read many in the forum about this: with single user, miniroot, dd, flarcreate, ufsdump and ufsrestore. Which is the best metod? If i clone the disk with... (6 Replies)
Discussion started by: tirher
6 Replies

5. Solaris

Clonar disco solaris 8 SCSI

Hola gente, Tengo un solaris 8 instalado en una sun (sparc) v120, tengo 2 discos scsi, uno donde esta instalado el s.o. y otro libre. He leido en el foro varias formas: bootear mono usuario, con miniroot, con dd, flarcreate, ufsdump y ufsrestore. Cual es el mejor modo que... (1 Reply)
Discussion started by: tirher
1 Replies

6. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
Discussion started by: RicardoM
2 Replies

7. UNIX for Dummies Questions & Answers

installing scsi card

i hava bought scsi card for taking backup in a 12/24 DAT DRIVE -scounix5.05 i am havaing the cd of the same contain driver files how should i install it. can anybody help me. (0 Replies)
Discussion started by: tatacoffee
0 Replies

8. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
Discussion started by: hafizurr
3 Replies

9. UNIX for Advanced & Expert Users

SCSI Card in Solaris 8

HI, I am trying to install Symbios SCSI PCI adapter in Ultra10 but unable to configure it. Getting following errors genunix: NOTICE: glm0: fault detected in device; service still unavailable genunix: NOTICE: glm0: Symbios PCI device (1000,3) not supported. Anyone has an idea, how to resolve... (1 Reply)
Discussion started by: s_aamir
1 Replies

10. UNIX for Advanced & Expert Users

Ultra 3 scsi card

Ok guys I need all the help I can get right now. I have a Ultra 60 sun server and I can't get a ultra 3 scsi card to work in it . When I install the card the system will not boot correctly and I come up with errors that say: pcipsy0: This is block Can someone please help me. I trying to hook... (2 Replies)
Discussion started by: aojmoj
2 Replies
Login or Register to Ask a Question