Solaris

Hi,
I have configured our SAN Storage to be connected to our new SUN T5220.
On the SAn it looks all fine
on the server I do not see any connection:
cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c1::dsk/c1t2d0 disk connected configured unknown
c1::dsk/c1t3d0 disk connected configured unknown
c1::dsk/c1t4d0 disk connected configured unknown
c1::dsk/c1t5d0 disk connected configured unknown
c1::dsk/c1t6d0 disk connected configured unknown
c1::dsk/c1t7d0 disk connected configured unknown
c2 fc connected unconfigured unknown
c3 fc-fabric connected configured unknown
c3::5006016039a0399b disk connected configured unknown
c4 fc-fabric connected configured unknown
c4::5006016939a0399b disk connected configured unknown
c5 fc connected unconfigured unknown
c6 fc connected unconfigured unknown
c7 fc-fabric connected unconfigured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb0/3 unknown empty unconfigured ok
usb1/1 unknown empty unconfigured ok
usb1/2 unknown empty unconfigured ok
usb2/1 unknown empty unconfigured ok
usb2/2 usb-storage connected configured ok
usb2/3 unknown empty unconfigured ok
usb2/4 usb-hub connected configured ok
usb2/4.1 unknown empty unconfigured ok
usb2/4.2 unknown empty unconfigured ok
usb2/4.3 unknown empty unconfigured ok
usb2/4.4 unknown empty unconfigured ok
usb2/5 unknown empty unconfigured ok


the cableing for the SAn is connected to c4 and c7

currently already we have another storeage on c3 and c4

Questions:
Is it in generel possible to connect 2 different storage via c4 ?
Why so I not see anything with cfgadm -al ? also a cfgadm -c configure on any c*
does not change anything

thanks,

Manni

can you please execute these two commands and tell us the output ?

# luxadm -e port

#luxmadm probe




it will show you the HBA connection with the storage

# luxadm -e port
/devices/pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0/fp@0,0:devctl NOT CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0:devctl CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0/fp@0,0:devctl CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@0/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl NOT CONNECTED
/devices/pci@0/pci@0/pci@9/SUNW,qlc@0,1/fp@0,0:devctl NOT CONNECTED
luxadm probe
No Network Array enclosures found in /dev/es

Found Fibre Channel device(s):
Node WWN:50060160b9a0399b Device Type:Disk device
Logical Path:/dev/rdsk/c3t5006016039A0399Bd0s2
Logical Path:/dev/rdsk/c4t5006016939A0399Bd0s2

you see luxadm -e port shows only 2 cards activ but it should be 3

even san connection cable is on 1 already acti card and 1 not "connected card"

luxadm probe shows path to current attached storage

thanks

so you're having only two connections.

From your server you have to check that the HBA is working or not... and verify your cables.

From the SAN, just verify that port your connected to is enabled.

Most of the time, the problem lies at the switch end