Hi, a couple of T2000 servers did not show the component status and the output was too short. There was a patch that needed to be installed. I also updated to the latest recommended patch cluster and OBP patch.
After reboot/restart of picl, it worked ok for a couple of weeks. Then suddenly it went back to its original state. prtdiag -v output not correct, but /usr/platform/`uname -i`/sbin/prtdiag -v is correct. Even this happens intermittently. What could be the problem. need to resolve asap

can you run this:

which prtdiag

what version you talking abt?

SunFire T2000, now free with any purchase over $10. (while supplies last)


How about some output from prtdiag? ...or error messages? ...or telling us what patch was installed. ...or tell us about any hardware attached to the server such as a storage array? ...or maybe anything that would actually help troubleshoot the problem?

Boot device: disk  File and args:
ufs-file-system
Loading: /platform/SUNW,Sun-Fire-T200/boot_archive
Loading: /platform/sun4v/boot_archive
ramdisk-root hsfs-file-system
Loading: /platform/SUNW,Sun-Fire-T200/kernel/sparcv9/unix
Loading: /platform/sun4v/kernel/sparcv9/unix
SunOS Release 5.10 Version Generic_138888-03 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
os-io sorry, variable 'xmit_hiwat' is not defined in the 'udp' module
sorry, variable 'recv_hiwat' is not defined in the 'udp' module
NOTICE: nxge1: xcvr addr:0x0c - link is down
Hostname: domainwer12
NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
/dev/md/rdsk/d5 is clean
/dev/md/rdsk/d3 is clean
/dev/md/rdsk/d100 is clean
/dev/rdsk/c2t600A0B800029CE40000021D847868CA3d0s0 is clean
Reading ZFS config: done.

Authorized uses only. All activity may be monitored and reported.
domainwer12 console login: root
Password: starting Sun StorEdge EBS daemons:
 nsrexecd
Apr  5 08:18:05 domainwer12 root: Oracle Cluster Ready Services starting up automatically.
Apr  5 08:18:11 domainwer12 root: Cluster Ready Services completed waiting on dependencies.
Apr  5 08:18:11 domainwer12 last message repeated 2 times
Apr  5 08:18:11 domainwer12 root: Running CRSD with TZ = Singapore

Apr  5 08:18:14 domainwer12 login: ROOT LOGIN /dev/console
Last login: Sun Apr  5 08:11:12 on console
Authorized uses only. All activity may be monitored and reported.
Sourcing //.profile-EIS.....
root@domainwer12 #
root@domainwer12 #
root@domainwer12 #
root@domainwer12 #
root@domainwer12 #
root@domainwer12 #
root@domainwer12 # bash
root@domainwer12 # prtdiag -v
System Configuration:  Sun Microsystems  sun4v Sun Fire T200
Memory size: 16256 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation         Status
------ --------- ---------------------- -------
0      1200 MHz  SUNW,UltraSPARC-T1     on-line
1      1200 MHz  SUNW,UltraSPARC-T1     on-line
2      1200 MHz  SUNW,UltraSPARC-T1     on-line
3      1200 MHz  SUNW,UltraSPARC-T1     on-line
4      1200 MHz  SUNW,UltraSPARC-T1     on-line
5      1200 MHz  SUNW,UltraSPARC-T1     on-line
6      1200 MHz  SUNW,UltraSPARC-T1     on-line
7      1200 MHz  SUNW,UltraSPARC-T1     on-line
8      1200 MHz  SUNW,UltraSPARC-T1     on-line
9      1200 MHz  SUNW,UltraSPARC-T1     on-line
10     1200 MHz  SUNW,UltraSPARC-T1     on-line
11     1200 MHz  SUNW,UltraSPARC-T1     on-line
12     1200 MHz  SUNW,UltraSPARC-T1     on-line
13     1200 MHz  SUNW,UltraSPARC-T1     on-line
14     1200 MHz  SUNW,UltraSPARC-T1     on-line
15     1200 MHz  SUNW,UltraSPARC-T1     on-line
16     1200 MHz  SUNW,UltraSPARC-T1     on-line
17     1200 MHz  SUNW,UltraSPARC-T1     on-line
18     1200 MHz  SUNW,UltraSPARC-T1     on-line
19     1200 MHz  SUNW,UltraSPARC-T1     on-line
20     1200 MHz  SUNW,UltraSPARC-T1     on-line
21     1200 MHz  SUNW,UltraSPARC-T1     on-line
22     1200 MHz  SUNW,UltraSPARC-T1     on-line
23     1200 MHz  SUNW,UltraSPARC-T1     on-line
24     1200 MHz  SUNW,UltraSPARC-T1     on-line
25     1200 MHz  SUNW,UltraSPARC-T1     on-line
26     1200 MHz  SUNW,UltraSPARC-T1     on-line
27     1200 MHz  SUNW,UltraSPARC-T1     on-line
28     1200 MHz  SUNW,UltraSPARC-T1     on-line
29     1200 MHz  SUNW,UltraSPARC-T1     on-line
30     1200 MHz  SUNW,UltraSPARC-T1     on-line
31     1200 MHz  SUNW,UltraSPARC-T1     on-line

========================= IO Configuration =========================

            IO
Location    Type  Slot Path                                          Name                      Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
IOBD/NET0    PCIE IOBD                /pci@780/pci@0/pci@1/network@0    network-pciex8086,105e
IOBD/NET1    PCIE IOBD              /pci@780/pci@0/pci@1/network@0,1    network-pciex8086,105e
IOBD/PCIE    PCIE IOBD                   /pci@780/pci@0/pci@9/scsi@0         scsi-pciex1000,56 LSI,1064E
IOBD/NET2    PCIE IOBD                /pci@7c0/pci@0/pci@2/network@0    network-pciex8086,105e
IOBD/NET3    PCIE IOBD              /pci@7c0/pci@0/pci@2/network@0,1    network-pciex8086,105e
IOBD/PCIE1   PCIE    1                /pci@7c0/pci@0/pci@8/network@0    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1   PCIE    1              /pci@7c0/pci@0/pci@8/network@0,1    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1   PCIE    1              /pci@7c0/pci@0/pci@8/network@0,2    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1   PCIE    1              /pci@7c0/pci@0/pci@8/network@0,3    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE2   PCIE    2                /pci@7c0/pci@0/pci@9/network@0    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE2   PCIE    2              /pci@7c0/pci@0/pci@9/network@0,1    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE2   PCIE    2              /pci@7c0/pci@0/pci@9/network@0,2    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE2   PCIE    2              /pci@7c0/pci@0/pci@9/network@0,3    network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE0   PCIE    0          /pci@780/pci@0/pci@8/pci@0/TSI,mko@0                   TSI,mko    XVR200
IOBD/PCIX    PCIX IOBD              /pci@7c0/pci@0/pci@1/pci@0/isa@2                       isa
IOBD/PCIX    PCIX IOBD              /pci@7c0/pci@0/pci@1/pci@0/usb@5       usb-pciclass,0c0310
IOBD/PCIX    PCIX IOBD              /pci@7c0/pci@0/pci@1/pci@0/usb@6       usb-pciclass,0c0310
IOBD/PCIX    PCIX IOBD              /pci@7c0/pci@0/pci@1/pci@0/ide@8          ide-pci10b9,5229
IOBD/PCIX1   PCIX    1       /pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@1     SUNW,qlc-pci1077,2422  QLA2460
IOBD/PCIX0   PCIX    0       /pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@2     SUNW,qlc-pci1077,2422  QLA2460

========================= HW Revisions =======================================

System PROM revisions:
----------------------
OBP 4.27.7 2007/10/24 08:24

IO ASIC revisions:
------------------
Location             Path                                          Device                         Revision
-------------------- --------------------------------------------- ------------------------------ ---------
IOBD/SAS-SATA-HBA                                  /pci@780                 SUNW,sun4v-pci     0
IOBD/SAS-SATA-HBA                            /pci@780/pci@0              pciex10b5,8532.bc   188
IOBD/SAS-SATA-HBA                      /pci@780/pci@0/pci@9              pciex10b5,8532.bc   188
IOBD/IO-BRIDGE                                     /pci@7c0                 SUNW,sun4v-pci     0
IOBD/PCI-SWITCH1                             /pci@7c0/pci@0              pciex10b5,8532.bc   188
IOBD/PCI-BRIDGE                /pci@7c0/pci@0/pci@1/pci@0,2                pciex8086,341.9     9
IOBD/GBE0                    /pci@780/pci@0/pci@1/network@0     pciex8086,105e.108e.105e.6     6
IOBD/GBE0                  /pci@780/pci@0/pci@1/network@0,1     pciex8086,105e.108e.105e.6     6
IOBD/GBE1                    /pci@7c0/pci@0/pci@2/network@0     pciex8086,105e.108e.105e.6     6
IOBD/GBE1                  /pci@7c0/pci@0/pci@2/network@0,1     pciex8086,105e.108e.105e.6     6
IOBD/SAS-SATA-HBA               /pci@780/pci@0/pci@9/scsi@0       pciex1000,56.1000.1000.2     2
root@domainwer12 # cat /etc/system
*ident  "@(#)system     1.18    97/06/27 SMI" /* SVR4 1.5 */
*
* SYSTEM SPECIFICATION FILE
*

* moddir:
*
*       Set the search path for modules.  This has a format similar to the
*       csh path variable. If the module isn't found in the first directory
*       it tries the second and so on. The default is /kernel /usr/kernel
*
*       Example:
*               moddir: /kernel /usr/kernel /other/modules



* root device and root filesystem configuration:
*
*       The following may be used to override the defaults provided by
*       the boot program:
*
*       rootfs:         Set the filesystem type of the root.
*
*       rootdev:        Set the root device.  This should be a fully
*                       expanded physical pathname.  The default is the
*                       physical pathname of the device where the boot
*                       program resides.  The physical pathname is
*                       highly platform and configuration dependent.
*
*       Example:
*               rootfs:ufs
*               rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a
*
*       (Swap device configuration should be specified in /etc/vfstab.)



* exclude:
*
*       Modules appearing in the moddir path which are NOT to be loaded,
*       even if referenced. Note that `exclude' accepts either a module name,
*       or a filename which includes the directory.
*
*       Examples:
*               exclude: win
*               exclude: sys/shmsys



* forceload:
*
*       Cause these modules to be loaded at boot time, (just before mounting
*       the root filesystem) rather than at first reference. Note that
*       forceload expects a filename which includes the directory. Also
*       note that loading a module does not necessarily imply that it will
*       be installed.
*
*       Example:
*               forceload: drv/foo



* set:
*
*       Set an integer variable in the kernel or a module to a new value.
*       This facility should be used with caution.  See system(4).
*
*       Examples:
*
*       To set variables in 'unix':
*
*               set nautopush=32
*               set maxusers=40
*
*       To set a variable named 'debug' in the module named 'test_module'
*
*               set test_module:debug = 0x13

* Begin MDD root info (do not edit)
rootdev:/pseudo/md@0:0,0,blk
* End MDD root info (do not edit)

* ORACLE SETTINGS
set noexec_user_stack=1
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set semsys:seminfo_semmni=4096
set semsys:seminfo_semmsl=100
set semsys:seminfo_semmns=25000
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767
set udp:xmit_hiwat=65536
set udp:recv_hiwat=65536
* ORACLE SETTINGS

* Require NFS clients to use privileged ports
set nfssrv:nfs_portmon=1
root@domainwer12 # Apr  5 08:19:05 domainwer12 sshd[2946]: Failed none for snsravi from 172.20.2.200 port 2772 ssh2

root@domainwer12 #

Now the OBP is 4.30, not 4.27 as you see above. But same prtdiag output

This is not a problem at all.


Almost all the Niagra servers (T200, T5120, T5xxx, T1xxx, T2xxx). gives the same brief output.

Prtdiag is dependent on the hardware, so basically it is how much your hardware is willing to give to the OS.



unfortunately, what I've noticed is that these servers don't give much information in the prtdiag command.


your prtdiag command is perfectly correct, and there's no way you're going to get more information.


For more hardware information, you can always check hardware components in ILOM.