Sorry for overlooking the first thing that came to mind, but I assume you've ensured that you have a default route added somewhere in a startup script in /etc/rc2.d ??
For instance:
route add default <gateway ip address>
Just making sure. Sometimes it's the obvious stuff that gets overlooked.
Hi all,
First post here. Working on Solaris 10, on a Sun t4-4, need to change RX queue depth(ethernet, not HBA) and was wondering if i could get by with just restarting the network or if i should just bounce the whole shebang.
Apologies if i missed a similar thread. if there is one, please... (2 Replies)
Hi,
I made following configuration to create user directory:
# authconfig --enablemkhomedir --update
But the directory is created as permission 755, I'd like to modify the script to change directory access permission to 700, where is the script which copies /etc/skel to /home... (0 Replies)
Hello,
Does any one know any command which reboot the system and select as boot device the network.
I give bootnet to many servers at once and i want to avoid opening ILOM and select as boot device the network.
Can i do it by just executing a command?
Thanks in advance (2 Replies)
Hello,
On Aix 5.2, we changed the parameters tcp_keepinit, tcp_keepintvl and tcp_keepidle with the no command.
tunrestore -R is present in inittab
in the directory /etc/tunables we can clearly see the inclusion of parameters during reboot, including the file lastboot.log
... (0 Replies)
hi expert,
i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below :
Setting default IPv4 interface for multicast: add net 224.0/4: gateway... (5 Replies)
I have 4 V440 servers running Solaris 9. I have their interfaces configured (ce0) and have connectivity to our network. However, after reboot,...the connectivity is lost although the interface shows that its still up after an ifconfig -a.
Only after I reconfigure the interface do I restore... (19 Replies)
TIME(2) Linux Programmer's Manual TIME(2)NAME
time - get time in seconds
SYNOPSIS
#include <time.h>
time_t time(time_t *t);
DESCRIPTION
time() returns the time as the number of seconds since the Epoch, 1970-01-01 00:00:00 +0000 (UTC).
If t is non-NULL, the return value is also stored in the memory pointed to by t.
RETURN VALUE
On success, the value of time in seconds since the Epoch is returned. On error, ((time_t) -1) is returned, and errno is set appropriately.
ERRORS
EFAULT t points outside your accessible address space.
CONFORMING TO
SVr4, 4.3BSD, C89, C99, POSIX.1-2001. POSIX does not specify any error conditions.
NOTES
POSIX.1 defines seconds since the Epoch using a formula that approximates the number of seconds between a specified time and the Epoch.
This formula takes account of the facts that all years that are evenly divisible by 4 are leap years, but years that are evenly divisible
by 100 are not leap years unless they are also evenly divisible by 400, in which case they are leap years. This value is not the same as
the actual number of seconds between the time and the Epoch, because of leap seconds and because system clocks are not required to be syn-
chronized to a standard reference. The intention is that the interpretation of seconds since the Epoch values be consistent; see
POSIX.1-2008 Rationale A.4.15 for further rationale.
SEE ALSO date(1), gettimeofday(2), ctime(3), ftime(3), time(7)COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2011-09-09 TIME(2)
