Sorry for overlooking the first thing that came to mind, but I assume you've ensured that you have a default route added somewhere in a startup script in /etc/rc2.d ??
For instance:
route add default <gateway ip address>
Just making sure. Sometimes it's the obvious stuff that gets overlooked.
Hi all,
First post here. Working on Solaris 10, on a Sun t4-4, need to change RX queue depth(ethernet, not HBA) and was wondering if i could get by with just restarting the network or if i should just bounce the whole shebang.
Apologies if i missed a similar thread. if there is one, please... (2 Replies)
Hi,
I made following configuration to create user directory:
# authconfig --enablemkhomedir --update
But the directory is created as permission 755, I'd like to modify the script to change directory access permission to 700, where is the script which copies /etc/skel to /home... (0 Replies)
Hello,
Does any one know any command which reboot the system and select as boot device the network.
I give bootnet to many servers at once and i want to avoid opening ILOM and select as boot device the network.
Can i do it by just executing a command?
Thanks in advance (2 Replies)
Hello,
On Aix 5.2, we changed the parameters tcp_keepinit, tcp_keepintvl and tcp_keepidle with the no command.
tunrestore -R is present in inittab
in the directory /etc/tunables we can clearly see the inclusion of parameters during reboot, including the file lastboot.log
... (0 Replies)
hi expert,
i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below :
Setting default IPv4 interface for multicast: add net 224.0/4: gateway... (5 Replies)
I have 4 V440 servers running Solaris 9. I have their interfaces configured (ce0) and have connectivity to our network. However, after reboot,...the connectivity is lost although the interface shows that its still up after an ifconfig -a.
Only after I reconfigure the interface do I restore... (19 Replies)
reboot(8) System Manager's Manual reboot(8)NAME
reboot - Restarts the machine
SYNOPSIS
/usr/sbin/reboot [-dlnq]
DESCRIPTION
When the system is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation. If no users are
logged in, use the reboot command.
The reboot command normally stops all running processes, syncs the disks, logs the reboot, and writes a shutdown entry in the login
accounting file, /var/adm/wtmp.
The reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
ware time-of-day clock. After these activities, the system reboots. By default, the system starts and the file systems are automatically
checked. If the start-up activities are successful, the system comes up in the default run-level.
You must have root privileges to use this command. Using the -n flag can result in file system damage.
FLAGS
Generates a crash dump of the system before halting it. Can be used with any of the other flags. Does not log the reboot using syslog
Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not log
the reboot using syslog
EXAMPLES
To enable the default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
shutdown, and perform other routine shutdown and reboot activities. To shut down the system without logging the reboot, enter: reboot -l
This command shuts down the system and performs all shutdown and reboot activities, except logging the shutdown. To reboot the system
abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.
FILES
Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon
RELATED INFORMATION
Commands: fsck(8), halt(8), init(8), savecore(8)shutdown(8), syslogd(8)
Functions: reboot(2), sync(2), syslog(3) delim off
reboot(8)
