I have 1 serial port (9 Pin) attached with my Linux server.If I give $dmesg | grep tty , it provides me the following. ttyS0 and ttyS1.
I have 1 COM port with my server mother board. I have 1 customized application
that requires this COM port to be used.
The parameter to be set for COM port is as follows.
Code:
Baud Rate:- 9600
Data Bit: - 9
Parity: - None
Stop Bit: - 1
Flow Control :- None
How to set these parameters for this COM port(I guess ttyS0 is the required COM port) in Red Hat Linux 5.9?
Last edited by Don Cragun; 09-02-2015 at 04:52 PM..
Reason: Add CODE and ICODE tags.
I am trying to change the setting of serial port baud rate in Red Hat Linux 5.9 by the following command.
>> stty 9600 cs8 -parenb -ixon -cstopb -echo -F /dev/ttyS0
The serial port will be used by our custom application in 2 separate servers which are the replica of one another.
The port setting... (2 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi,
I am working with Sun Solaris 9 Sparc,Sun-Blade-100.In my application,I need to monitor the UPS using Serial port.
When I am using JRE 1.4 in my application,I am able to monitor it but when I am upgrading the JRE version from 1.4 to JRE1.6. I am not able to monitor the UPS.It is showing the... (1 Reply)
I am working with solaris 9 sparc and I want to connect physical device in serial port but when I am connecting it,It is showing the error window saying--
So can any1 tell me the reason or is there any package I have to add to work with serial port??? (2 Replies)
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Hi
I have just re-installed Compaq ML350 G2 Server with Unix SCO 5.0.5 and
informix DBMS .
on this server we have 2 serial ports , unfortunately its not working.
Can anyone help me to check the serial ports working or not OR guide me
to reconfigure it.
I have attached a device with... (1 Reply)
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
I am having trouble with a device connected through a serial port on my sun workstation ( I am running solaris 7).
The seriel device works on an identical workstation running the same o/s version but when I move it to the initial workstation it doesn't work. I am using an rs232 serial cable and... (1 Reply)
