Search Results

Hmm,

The error it is throwing clearly says it cannot find /dev/hd5
There is something utterly wrong in the configuration, why are all the LV names changed? why bootlv00? it should be something...

I ran into the same issue few months ago. But the below is very helpful
Easy way out.

I am taking your example of HTTP, but you can apply this to almost all the RPMs that you think exist on the...

OK,
That goes with VG, see which VG is shared, when you run
lspv
Few VG's show concurrent and few active, the concurrent one's are shared between the nodes in cluster.

The VGs (single or...

Ok,
Have you tried varyoffvg patchtest?

If that doesn't varyoff, then you have to look into each vhost and their backing device and compare it with lsvg -l `lsvg` output.

If you see some...

Ok, so LV is given as disk to client.
Do this
On VIOS (as root)
lsvg -o
lsvg -l <vgname>In which VG do you find the LV testpatch?

Now go to client and do
rmdev -Rdl hdisk0

Now go to VIOS...

Ok,
So you manually edited the /etc/passwd file.
Lesson no.1 You never do that.

Now, coming to your problem, after you change the password for root2, is it letting you in to the system?

Do...

Ok,
To answer your question in simple way YES, you can migrate your LPAR from one frame to another. But there are few things to have to consider before doing so, such as licensing, support, hardware...

Ok,
Here is what you have to do.
It seems like you have file system(s) mount, which was/were under that VG (vgnet).
So 1st thing is umount that/those file system(s)
If you don't know which file...

Just to add to bakunin's comments

When you are in sms menu for client (IPL where you configure the IP, Master IP subnet and gateway), say for IP 10.30.1.21 you will use the gateway of that client...

Ok,
Nothing more is coming to my mind now, at this point what I can say is

Add tsm server (20.x) to /etc/hosts file of client.

Make sure you follow the correct naming convention for both, if...

The command provided by zaxxon, will work, can you paste the output?

Also there is another way to know the INSTALLED CPUS (know this will give you total CPU installed in the system, but NOT the...

My two cents with rbattel, those are unread messages, figure out why it is generating it, by logging in as that user and running mail (as mentioned by rbattel).

Also, check your cron, see if you...

MD5 signature on AIX? is that not for android?
As for https, the port (443) is open by default.
cat /etc/services | egrep 'http protocol over TLS/SSL'

This should popup port 443 without hash.

1st thing 1st, I misspelled your name in the previous post and sorry for that!
I am thinking that you are creating a new mksysb when you execute mkdvd command.

I ran mkdvd on many occasions, but...

Sure you can burn the image in DVD and use it (as rbattel mentioned).

Use mkdvd command for it.

Its simple, what you have to do is, change the VG to big VG,
chvg -B sapvg
That's it,

See, currently the max PVs you can accommodate in that VG is 8, changing it to Big will increase the no of...

Shutdown command is not safe? I don't think so.

Once you setup the scripts (with Capital K to stop app and if you want to start the app after the system is back online then you can use capital S...

Its always better to have unlimited for root, as its the boss.
Moreover, when you do operations as root, you need those values at higher range.

Example: To transfer huge file(s), you need files...

Ok, run
smitty lang --> Add Additional Language Environments
--> CULTURAL convention to install (F4 or Esc+4 to expand)
--> Search (EN_GB) --> UTF-8 English (Great Britain) [EN_GB]
...

1st you need to make sure that "siebelvg" is going to be shared between nodes? if its not then you don't need to enable enhance concurrent on that, and if you are sharing the VG then
Change the VG...

2145 are SVC's (an inline virtualization), have you asked the storage admin whether they have SSD's (storage array) connected to same SAN as this one? I hope they are NOT playing mix and match on...

1st thing, the error is saying you have no free PPs, so don't go for 256GB extention directly, if you have not observe the available free PPs on VG is 1023 (as one PP is taken by VG).

Just go with...

Ok,
You can use a short cut (smitty spooler --> add a print queue) or
Run smitty printer --> print spooling --> add a print queue --> remote --> standard processing


...

Can you tell us, what port no did you/he assigned?

May be your team did not performed a stress test thoroughly, you will put the system to its max limits during that test (before you go live).

I guess, the no of users after go-live crossed the...