DPMSForceLevel(3) X FUNCTIONS DPMSForceLevel(3)NAME
DPMSForceLevel - forces a DPMS capable display into the specified power level
SYNOPSIS
cc [ flag ... ] file ... -lXext [ library ... ]
#include <X11/extensions/dpms.h>
Status DPMSForceLevel ( Display *display, CARD16 level );
ARGUMENTS
display
Specifies the connection to the X server
level Specifies the level to force power to
DESCRIPTION
The DPMSForceLevel function forces a DPMS capable display into the specified power level. The level must be one of following four states:
DPMSModeOn, DPMSModeStandby, DPMSModeSuspend, or DPMSModeOff. Values other than these will result in a BadValue error. If DPMS is disabled
on the display, trying to set the power level on the display will result in a BadMatch protocol error.
RETURN VALUES
TRUE The DPMSForceLevel function always returns TRUE.
ERRORS
BadValue A level other than DPMSModeOn, DPMSModeStandby, DPMSModeSuspend, or DPMSModeOff was specified.
BadMatch DPMS is disabled on the specified display.
SEE ALSO DPMSCapable(3), DPMSInfo(3), DPMSGetTimeouts(3), DPMSSetTimeouts(3)X Version 11 libXext 1.0.5 DPMSForceLevel(3)
Check Out this Related Man Page
DPMSEnable(3) X FUNCTIONS DPMSEnable(3)NAME
DPMSEnable - enables DPMS on the specified display
SYNOPSIS
cc [ flag ... ] file ... -lXext [ library ... ]
#include <X11/extensions/dpms.h>
Status DPMSEnable ( Display *display );
ARGUMENTS
display
Specifies the connection to the X server
DESCRIPTION
The DPMSEnable function enables Display Power Management Signaling (DPMS) on the specified display. When DPMS is enabled, DPMS will use
the currently saved timeout values. It will trigger the appropriate DPMS power level based on the timeout values. Refer to DPMSSetTimeouts.
All physical screens are affected by DPMSEnable at the same time.
If DPMSEnable is invoked on a display which has DPMS already enabled, or on a display which does not support DPMS, no change is made and no
error is returned.
RETURN VALUES
TRUE The DPMSEnable function always returns TRUE.
SEE ALSO DPMSCapable(3), DPMSDisable(3), DPMSGetTimeouts(3), DPMSSetTimeouts(3)X Version 11 libXext 1.0.5 DPMSEnable(3)
Hi Guru,
Where is the level to run clearfault command from M3000?
I only go XSCF and OS level and don't know how to get into this service level...
Need to clearfault for MBU_A as show the error like
* MBU_A Status:Degraded; Ver:0101h; Serial:PP095200RA ;
when I run showhardconf... (2 Replies)