snd_ctl_remove_id(9) [suse man page]

SND_CTL_REMOVE_ID(9)						   Sound Devices					      SND_CTL_REMOVE_ID(9)

NAME

       snd_ctl_remove_id - remove the control of the given id and release it

SYNOPSIS

       int snd_ctl_remove_id(struct snd_card * card, struct snd_ctl_elem_id * id);

ARGUMENTS

       card
	   the card instance

       id
	   the control id to remove

DESCRIPTION

       Finds the control instance with the given id, removes it from the card list and releases it.

       Returns 0 if successful, or a negative error code on failure.

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010						      SND_CTL_REMOVE_ID(9)

MEMORY_CS(4)						     Kernel Interfaces Manual						      MEMORY_CS(4)

NAME

       memory_cb - CardBus memory driver

SYNOPSIS

       insmod memory_cb.o [pc_debug=n]

DESCRIPTION

       Memory_cb gives direct memory access to the address spaces of CardBus cards.  It provides character-mode devices for accessing a card's PCI
       configuration space, up to six mapped memory or IO regions, and its expansion ROM space.  When loaded, memory_cb will allocate a free major
       device number.  For each card, it will report which address spaces are available, and their sizes.  Minor numbers have the form 'dddddsss',
       where 'ddddd' is the instance number and 'sss' is the memory space for that instance.  When memory_cb is bound to a card,  it  will  report
       its major and minor device numbers to cardmgr(8).

       The default memory card initialization script creates device special files for all eight card address spaces, though for a particular card,
       some of these may be unavailable.  These devices have the following names:

       /dev/cbmem#s0
	      The card's PCI configuration space.

       /dev/cbmem#s[1-6]
	      The IO or memory spaces mapped by the card's six Base Address Registers.

       /dev/cbmem#s7
	      The card's expansion ROM space.

       The character special devices can be used to read and write arbitrary numbers of bytes to arbitrary locations.  The memory_cb driver can be
       bound to any card regardless of function.

PARAMETERS

       pc_debug=n
	      Selects  the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.	A non-zero
	      value enables debugging.

AUTHOR

       David Hinds - dahinds@users.sourceforge.net

SEE ALSO

       cardmgr(8), pcmcia(5), memory_cs(4).

pcmcia-cs							2000/06/12 21:24:48						      MEMORY_CS(4)