SMPPPD(8) SMPPPD SMPPPD(8)NAME
smpppd - SuSE Meta PPP Daemon
DESCRIPTION
smpppd is a daemon that controls several internet connections.
Use a frontend like cinternet , qinternet or kinternet to control the connections and retrieve status informations. Those frontends can
also run on different hosts.
The configuration of the dialup connections is done by YaST2 but there are some additional options available in the file /etc/smpppd.conf.
smpppd is not intended for direct use. Use rcsmpppd instead.
OPTIONS
These options are recognized by smpppd.
--detach
Detach from the controlling terminal. This is the default.
--nodeatch
Don't detach from the controlling terminal.
-d, --debug
Turn on debugging.
--version
Show program version and exit.
--help Show help information and exit.
BUGS
ISDN support is poor.
SIGNALS
SIGHUP Reload the configuration.
FILES
/etc/smpppd.conf
Basic configuration.
/etc/sysconfig/network/ifcfg-*
Configuration files for the interfaces.
/etc/sysconfig/network/providers/*
Configuration files for the providers.
/var/run/smpppd/control
Socket to communicate with local frontends.
/var/run/smpppd/ifcfg-*
Sockets to communicate with backends.
SEE ALSO
kinternet, qinternet, accounting(1), cinternet(1), wvdial(1), smpppd.conf(5), pppd(8), smpppd-ifcfg(8).
AUTHOR
Arvin Schnell <arvin@suse.de>
SuSE September 2003 SMPPPD(8)
Check Out this Related Man Page
SMPPPD-IFCFG(8) SMPPPD SMPPPD-IFCFG(8)NAME
smpppd-ifcfg - SuSE Meta PPP Daemon
DESCRIPTION
smpppd-ifcfg is a daemon that controls a single dialup connection to the internet. It does so by starting and controlling the pppd. The
configuration of the dialup connections is done by YaST2.
smpppd-ifcfg is not intended for direct use. Use ifup and ifdown or a frontend like cinternet , qinternet or kinternet instead.
OPTIONS
These options are recognized by smpppd-ifcfg. If a long option shows an argument as mandatory, then it is mandatory for the equivalent
short option also.
--up Bring the connection up. This is the default action.
--down Bring the connection down.
--status
Report status of the connection.
-i, --ifcfg=NAME
Specify the ifcfg file to use. This option is mandatory.
-p, --provider=NAME
Specify the provider file to use.
--detach
Detach from the controlling terminal. This is the default.
--nodeatch
Don't detach from the controlling terminal.
-d, --debug
Turn on debugging.
--version
Show program version and exit.
--help Show help information and exit.
FILES
/etc/sysconfig/network/ifcfg-*
Configuration files for the interfaces.
/etc/sysconfig/network/providers/*
Configuration files for the providers.
/var/log/smpppd/ifcfg-xxx.log
Log file.
/var/log/smpppd/accounting.log
File containing accounting information.
/var/run/smpppd.ifcfg-xxx.pid
Pid file.
/var/lib/smpppd/ifcfg-xxx.info
Info file with various status information.
/var/run/smpppd/ifcfg-xxx
Socket to communicate with smpppd.
SEE ALSO
kinternet, qinternet, cinternet(1), accounting(1), wvdial(1), smpppd.conf(5), pppd(8), smpppd(8).
AUTHOR
Arvin Schnell <arvin@suse.de>
SuSE December 2002 SMPPPD-IFCFG(8)
At the end of the installation of my video card driver's, there is this note on the isntruction from intel
1. Run SuSE's own configurator called 'YAST'
under System from SuSE application broswer menu
a. Select the 'Hardware' icon
b. Select the 'Graphics Card and Monitor' icon
c. Select... (3 Replies)
Hello,
So, I burned the 5 cds of SuSE 10.1, and would really like to begin installation.
But when I get to the partitioning phase, I get an error message saying the first hard drive is unreadable by parted, and that I'll have to use Yast instead. It also tells me I wont be able to move delete... (0 Replies)
Dear All,
I would like to install VERITAS Cluster 4.1 on SuSE Linux 10 with SP1 & following is the requirement of the kernel from VERITAS side;
SUSE Linux Enterprise Server 10 with SP1 with following kernel level: 2.6.16-37-0.18-smp/2.6.16-37-0.18-bigsmp
After installing the SuSE 10 with... (1 Reply)
If my laptop is running OpenSuSE and i connect it to a Novell/SuSE network, would i be able to log on or not? do i still need the novell client and is there a novell client for a linux distro?
any info would be welcome. thanks (1 Reply)
Hi,
I have server that I change its network configuration from using DHCP to using static IP.
I have edited the file /etc/sysconfig/network-scripts/ifcfg-eth0
To:
BOOTPROTO=STATIC
IPADDR=xxx.xxx.xxx.xxx
NETMASK=255.255.255.0
GATEWAY=yyy.yyy.yyy.yyy
I did
/etc/init.d/network... (2 Replies)
Guide on how to disable ipv6 for Centos and RedHat
1) Edit /etc/sysconfig/network-scripts/ifcfg-eth0 and change:
NETWORKING_IPV6=yes to NETWORKING_IPV6=no
2) Edit /etc/modprobe.conf and add these lines:
alias net-pf-10 off
alias ipv6 off
3) Stop the ipv6tables service:
... (0 Replies)
Hi,
I am on Redhat 5. on the /etc/sysconfig/network file
I don't see GATEWAY as one line. I also checked /etc/sysconfig/network-scripts/ifcfg-eth0. I don't see GATEWAY.
But on the server. But when I do netstat -rn. I see many address. Is there some other settings ?
... (2 Replies)