Login or Register to Ask a Question and Join Our Community

Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

sane-coolscan(5) [suse man page]

sane-coolscan(5)					   SANE Scanner Access Now Easy 					  sane-coolscan(5)

NAME

       sane-coolscan - SANE backend for Nikon film-scanners

ABOUT THIS FILE

       This file is a short description of the coolscan-backend for sane!

DESCRIPTION

       The  sane-coolscan library implements a SANE backend that provides the interface to the following Nikon Coolscan Film scanners: Nikon LS20,
       LS30, LS1000, LS2000.

       Even though the backend has worked for a number of people, there are  still  some  problems,  especially  in  combination  with	some  SCSI
       card/drivers  (AHA-1505/aha152x.o)  and	the  autofocus	command. You should consider this backend 'alpha' and be careful when using it the
       first time.

CONFIGURATION

       The configuration file for this backend resides in /etc/sane.d/coolscan.conf.

       Its contents is a list of device names that correspond to Nikon Coolscan scanners. Empty lines and lines starting with a hash mark (#)  are
       ignored. A sample configuration file is shown below:

	#scsi Vendor Model Type
	scsi Nikon * Scanner
	/dev/scanner

       The  special device name must be a generic SCSI device or a symlink to such a device.  To find out to which device your scanner is assigned
       and how you have to set the permissions of that device, have a look at sane-scsi.

SCSI ADAPTER TIPS

       Some SCSI-adapters and low-level SCSI drivers do not work correctly with this backend and the Coolscan scanners. These  systems	hang  when
       the  autofocus  command	is  send  to  the  Scanner.   To  see  a  list of which card/driver combinations work or dont work have a look at:
       http://andreas.rick.free.fr/sane/autofocus.html.

FILES

       The backend configuration file:
	      /etc/sane.d/coolscan.conf

       The static library implementing this backend:
	      /usr/lib64/sane/libsane-coolscan.a

       The shared library implementing this backend:
	      /usr/lib64/sane/libsane-coolscan.so (present on systems that support dynamic loading)

ENVIRONMENT

       SANE_DEBUG_COOLSCAN
	      If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a
	      value of 128 requests all debug output to be printed. Smaller levels reduce verbosity: SANE_DEBUG_COOLSCAN values

	      Examples:

	      on bash:
	      export SANE_DEBUG_COOLSCAN=8

	      on csh:
	      setenv SANE_DEBUG_COOLSCAN 8

BUGS

       The autofocus command does not work with some SCSI card/driver combinations

       The gamma table is not implemented for the LS1000 yet.

       The dust-removal is not working yet

SEE ALSO

       http://andreas.rick.free.fr/sane/
	      The homepage of this backend

       http://www.sema.be/coolscan/
	      The original version of the coolscan backend by Didier

       sane(7), sane-scsi(5)

THANKS TO

       Didier Carlier - For writing the original Coolscan backend (without it I would not have started this)

       Oliver Rauch - For adapting xsane so quickly to the infrared stuff.

       All the other people working on SANE.

AUTHOR

       Andreas Rick

EMAIL-CONTACT
       andreas.rick@free.fr

								    13 Jul 2008 						  sane-coolscan(5)

Check Out this Related Man Page

sane-ricoh(5)						   SANE Scanner Access Now Easy 					     sane-ricoh(5)

NAME

       sane-ricoh - SANE backend for Ricoh flatbed scanners

DESCRIPTION

       The sane-ricoh library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Ricoh flatbed scanners:

	      IS50
	      IS60

DEVICE NAMES

       This backend expects device names of the form:

	      special

       Where  special  is  the path-name for the special device that corresponds to a SCSI scanner. The special device name must be a generic SCSI
       device or a symlink to such a device.  The program sane-find-scanner helps to find out the correct device. Under Linux, such a device  name
       could be /dev/sga or /dev/sge, for example.  See sane-scsi(5) for details.

FILES

       /etc/sane.d/ricoh.conf
	      The backend configuration file (see also description of SANE_CONFIG_DIR below).

       /usr/lib64/sane/libsane-ricoh.a
	      The static library implementing this backend.

       /usr/lib64/sane/libsane-ricoh.so
	      The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
	      This  environment  variable  specifies the list of directories that may contain the configuration file.  Under UNIX, the directories
	      are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;').  If this variable is not set,  the	configura-
	      tion  file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d.  If the value
	      of the environment variable ends with the directory separator character, then the default directories are searched after the explic-
	      itly  specified  directories.  For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".",
	      and "/etc/sane.d" being searched (in this order).

       SANE_DEBUG_RICOH
	      If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend.  Higher
	      debug levels increase the verbosity of the output.

	      Example: export SANE_DEBUG_RICOH=4

SEE ALSO

       sane(7), sane-scsi(5)

AUTHOR

       Feico W. Dillema

								    14 Jul 2008 						     sane-ricoh(5)
Man Page