newport(4) [suse man page]

NEWPORT(4)						     Kernel Interfaces Manual							NEWPORT(4)

NAME

       newport - Newport video driver

SYNOPSIS

       Section "Device"
	 Identifier "devname"
	 Driver "newport"
	 ...
       EndSection

DESCRIPTION

       newport is an Xorg driver for the SGI Indy's and Indigo2's newport video cards.

SUPPORTED HARDWARE

       The  newport  driver supports the Newport (also called XL) cards found in SGI Indys and Indigo2s.  It supports both the 8bit and 24bit ver-
       sions of the Newport.

CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration details.	This section only covers configuration details specific to this driver.

       The following driver options are supported:

       Option "bitplanes" "integer"
	      number of bitplanes of the board (8 or 24) Default: auto-detected.

       Option "HWCursor" "boolean"
	      Enable or disable the HW cursor. Default: on.

       Option "BusID" "integer"
	      Set to 1 for the Indigo2 XL. Default: 0

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7)

AUTHORS

       Authors: Guido GUnther agx@sigxcpu.org

X Version 11						     xf86-video-newport 0.2.3							NEWPORT(4)

I128(4) 						     Kernel Interfaces Manual							   I128(4)

NAME

       i128 - Number 9 I128 Xorg video driver

SYNOPSIS

       Section "Device"
	 Identifier "devname"
	 Driver "i128"
	 ...
       EndSection

DESCRIPTION

       i128  is  an  Xorg  driver for Number 9 I128 video cards.  The driver is accelerated and provides support for all versions of the I128 chip
       family, including the SGI flatpanel configuration.  Multi-head configurations are supported.

SUPPORTED HARDWARE

       The i128 driver supports PCI and AGP video cards based on the following I128 chips:

       I128 rev 1  (original)

       I128-II

       I128-T2R    Ticket 2 Ride

       I128-T2R4   Ticket 2 Ride IV

CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration details.	This section only covers configuration details specific to this driver.

       The driver auto-detects the chipset type and may not be overridden.

       The driver auto-detects the amount of video memory present for all chips and may not be overridden.

       The following driver Options are supported:

       Option "HWCursor" "boolean"
	      Enable or disable the HW cursor.	Default: on.

       Option "NoAccel" "boolean"
	      Disable or enable acceleration.  Default: acceleration is enabled.

       Option "SyncOnGreen" "boolean"
	      Enable or disable combining the sync signals with the green signal.  Default: off.

       Option "Dac6Bit" "boolean"
	      Reduce DAC operations to 6 bits.	Default: false.

       Option "Debug" "boolean"
	      This turns on verbose debug information from the driver.	Default: off.

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7)

AUTHORS

       Authors include: Robin Cutshaw (driver), Galen Brooks (flatpanel support).

X Version 11						       xf86-video-i128 1.3.5							   I128(4)