dfutool(1) [suse man page]

DFUTOOL(1)																DFUTOOL(1)

NAME

       dfutool - Device Firmware Upgrade utility

SYNOPSIS

       dfutool [ options ] < command >

DESCRIPTION

       dfutool is used to verify, archive and upgrade firmware files.

OPTIONS

       -h     Gives a list of possible commands.

       -d <device>
	      The command specifies the device to use.

COMMANDS

       verify <dfu-file>
	      Display information about the firmware file.

       modify <dfu-file>
	      Change DFU specific values in the firmware file.

       upgrade <dfu-file>
	      Upgrade the device with a new firmware.

       archive <dfu-file>
	      Archive the current firmware of the device.

AUTHOR

       Written by Marcel Holtmann <marcel@holtmann.org>.

								  APRIL 21, 2005							DFUTOOL(1)

BCMFW(8)						    BSD System Manager's Manual 						  BCMFW(8)

NAME

     bcmfw -- firmware download utility for Broadcom BCM2033 chip based Bluetooth USB devices

SYNOPSIS

     bcmfw [-h] -f firmware_file_name -m mini-driver_file_name -n device_name

DESCRIPTION

     The bcmfw utility downloads the specified mini-driver and firmware files to the specified device.

     This utility will only work with Broadcom BCM2033 chip based Bluetooth USB devices.  The identification is currently based on USB vendor
     ID/product ID pair.  The vendor ID should be 0x0a5c (USB_VENDOR_BROADCOM) and the product ID should be 0x2033.

     Due to copyright issues I will no longer provide mini-driver and firmware files for the device.  These files can be obtained from the Linux
     BlueZ bluez-firmware package.

     Visit http://www.bluez.org/download.html for details.

     I am using the following files from the bluez-firmware-1.0 package:

	   MD5 (BCM2033-MD.hex) = 5580317158d07fc4ace90af04f8e1c73
	   MD5 (BCM2033-FW.bin) = b4e142b3272cfe5a84b32fda6b4b032f

     The options are as follows:

     -f firmware_file_name
	     Specify firmware file name for download.

     -h      Display usage message and exit.

     -m mini-driver_file_name
	     Specify mini-driver file name for download.

     -n device_name
	     Specify device name.

FILES

     BCM2033-MD.hex	Mini-driver image.
     BCM2033-FW.bin	Firmware image.
     /dev/ubtbcmfwN.EE	Endpoint EE of device N.

EXIT STATUS

     The bcmfw utility exits 0 on success, and >0 if an error occurs.

EXAMPLES

     To download the firmware into the /dev/ubtbcmfw0 device:

	   bcmfw -n ubtbcmfw0 -m BCM2033-MD.hex -f BCM2033-FW.bin

SEE ALSO

     ubtbcmfw(4), ugen(4)

AUTHORS

     Maksim Yevmenkin <m_evmenkin@yahoo.com>

BUGS

     Most likely.  Please report if found.

BSD
								  March 31, 2003							       BSD