EVERUPS(8) NUT Manual EVERUPS(8)NAME
everups - Driver for Ever UPS models
NOTE
This man page only documents the hardware-specific features of the everups driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver should recognize the NET *-DPC and AP *-PRO models.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This UPS can only switch off the load if it's running on battery. This means you may be vulnerable to power races if your shutdown scripts
don't sleep and force a reboot.
AUTHOR
Bartek Szady <bszx@bszxdomain.edu.eu.org>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 EVERUPS(8)
Check Out this Related Man Page
TRIPPLITESU(8) NUT Manual TRIPPLITESU(8)NAME
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
NOTE
This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports the Tripp Lite SmartOnline family (via the serial port).
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
lowbatt=num
Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low
battery until there are only a few seconds left. Common values are around 25--30.
AUTHOR
Allan N. Hessenflow <allanh@kallisti.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Other drivers for Tripp-Lite hardware:
tripplite(8), tripplite_usb(8), usbhid-ups(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 TRIPPLITESU(8)
Hi, i have a file like this:
A1
kdfjdljfdkljfdlf
A2
lfjdlfkjddkjf
A3
***no hit***
A4
ldjfldjfdk
A5
***no hit***
A6
jldfjdlfjdlkfjd
I want to remove the lines "***no hit*** and their above line to get an output file like this: (11 Replies)
Not my story, but interesting enough to be worth posting here IMHO. (Original is here)
The following is the 500-mile email story in the form it originally appeared, in a post to sage-members on Sun, 24 Nov 2002.:
From trey@sage.org Fri Nov 29 18:00:49 2002
Date: Sun, 24 Nov 2002 21:03:02... (3 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hi gurus,
I have a weird requirement. I need to convert the number to english lecture.
I have 1.2 ....19 numbers
I need to convert to first second third fourth, fifth, sixth...
Is there any way convert it using unix command?
thanks in advance. (8 Replies)
Hi,
Humorous UNIX Commands shows a fun way of using echo and dc to sort of obfuscate a string.
% echo 'sasb3135071790101768542287578439snlbxq'|dc
GET A LIFE!
I am just wanting to know if there is a way to sort of use dc and echo to print out an obfuscated/garbled string instead... (3 Replies)
Hi All,
Having recently started a new job, a Data Center Migration in fact I have been tasked with looking at some of the older Solaris boxes when I came across this little gem.
nismas# uname -a
SunOS nismas 5.5.1 Generic_103640-27 sun4u sparc SUNW,Ultra-1
nismas# uptime
10:37am up 2900... (2 Replies)
For any SunOS 5.XX release, it appears prior to the "login:" prompt (as if a "uname" command is run).
Would anyone know where that initial display of SunOS release comes from upon a remote login and how I can stop if from displaying?
Thank you (4 Replies)
I am trying to remove each line in which $2 is FP or RFP. I believe the below will remove one instance but not both. Thank you :).
file
12
123 FP
11
10 RFP
awk
awk -F'\t' '
$2 != "FP"' file
desired output
12
11 (6 Replies)
Hi everybody,
Which Unix base OS have best performance for HOST virtualization?
I tested SmartOS but it needs another OS to connect remotely!
Thanks in advance. (11 Replies)
I have this file:
>ID1
AA
>ID2
TTTTTT
>ID-3
AAAAAAAAA
>ID4
TTTTTTGGAGATCAGTAGCAGATGACAG-GGGGG-TGCACCCC
Add I am trying to use this script to output sequences longer than 15 characters:
sed -r '/^>/N;{/^.{,15}$/d}'
The desire output would be this:
>ID4... (8 Replies)
Hi,
I am having contents in a file like below,
cat testfile
rpool/swap
rpool/swap14
rpool/swap2
rpool/swap3
I want to sort the above contents like,
rpool/swap
rpool/swap2
rpool/swap3
rpool/swap14
I have tried in this way, (7 Replies)
Morning All
So, I am starting looking into the world of UNIX for a new job (luckily not my primary function!) and I am looking to get stared. Like anything I seem to learn best by trying things out first in an environment but I have a key question:
Currently I use Oracle VirtualBox, can... (8 Replies)