zcons(7D) Devices zcons(7D)NAME
zcons - Zone console device driver
DESCRIPTION
The zcons character driver exports the console for system zones. The driver is comprised of two "sides:" a master side with which applica-
tions in the global zone communicate, and a slave side, which receives I/O from the master side. The slave side is available in the global
zones.
Applications must not depend on the location of /dev or /devices entries exported by zcons. Inside a zone, the zcons slave side is fronted
by /dev/console and other console-related symbolic links, which are used by applications that expect to write to the system console.
The zcons driver is Sun Private, and may change in future releases.
FILES
/dev/zcons/<zonename>/masterconsole
Global zone master side console for zone <zonename>.
/dev/zcons/<zonename>/slaveconsole
Global zone slave side console for zone <zonename>.
/dev/zconsole
Non-global zone console (slave side).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
| Interface Stability |Sun Private |
+-----------------------------+-----------------------------+
SEE ALSO zoneadm(1M), zonecfg(1M), attributes(5), zones(5)SunOS 5.10 24 Aug 2003 zcons(7D)
Check Out this Related Man Page
zonename(1) User Commands zonename(1)NAME
zonename - print name of current zone
SYNOPSIS
zonename
DESCRIPTION
The zonename utility prints the name of the current zone.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWzoneu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO zlogin(1), zoneadm(1M), zonecfg(1M), attributes(5), zones(5)SunOS 5.10 9 Jan 2004 zonename(1)
ok so I have a list of names that end in either ot,om,oa.
So for example
DETOT
MANOA
DET0M
DET0A
MANOT
SEAOT
etc...
I want to be able to group this list by OT, OM, OA and have the output have some headers like this and be alphabatized and if possible be in colums instead of like... (10 Replies)
Hi
I am setting up a test server for actual 2 node servers which will be behind load balancer. I will not be using sun cluster at all. The test machine is installed with solaris 10.
I am not sure how to setup a test env of 2 nodes on only 1 node..may be creating 2 zones on test server will... (8 Replies)
Hi Gurus
I am not able to ping the local zone from global zone
when i am trying to ping i am getting below
ICMP Host Unreachable from gateway zone ( 192.268.35.210)
for icmp from zone ( 192.168.35.210) to sun1 ( 192.168.35.210)
However i can ping local zone from global
please... (12 Replies)
In Production system there is 12 Non-Global Zones. So in that 12 Non-Global zones one of the Non-Global zone taking 60-70% CPU usage and load average become very high.
Running processors are 52 only.
Please advise me is there any way to reduce the CPU sharing Utilization. (Most Urgent)
... (9 Replies)
Hi all
In a bit of a pickle here and need some help.
I have a 6800, with 2 SC controllers. I have a terminal concentrator ( TC ) attached to the serial ports. I cant ping / telnet these sc controllers, and when on the TC, I cant connect into them either. I am able to telnet to other servers... (21 Replies)
I am having trouble starting the DCHP server in a non-global zone that has exclusive access to an interface. Every time I attempt to start it goes in to maintenance mode and the error in the log shows this:
I have seen on a thread on Sun's forums that addressed this but it was dealing with Solaris... (9 Replies)
Hi All,
I want to know what is shared-IP and exclusive-IP while configuring zone?
How the global zone and non-global communicate with each other?
When I do ifconfig -a on my machine it shows below output
My doubt is they are physical and virtual interfaces in below output what is... (8 Replies)
Hi All,
Please help me in configuring interface in zone
I've zone with dedicated interface and I want this interface to get up with global system boot. I am struggling with IP, as always after reboot interface is not getting up automatically and I understand the reason for that.... (10 Replies)
I have a solaris10 zone running an oracle db in it. The zone hangs after some time the db is started and i 'm unable to log into the zone after that so i have to halt and restart the zone along with db .. but after few hrs again it hangs. What would be the reason for it. I did svcs -xv and got... (13 Replies)
For the life of me, I cannot figure out the syntax unless it's my configuration. Zone path is /zpool/zones/oracle11zone2 It is not running.
-bash-3.00# zfs snapshot zpool/zones/oracle11zone2@prepatch
cannot open 'zpool/zones/oracle11zone2': dataset does not exist
-bash-3.00# zfs snapshot... (13 Replies)
Hi All,
I have a whole root zone, tsesbd02-zesbx01. On this zone, syslog service is not coming up. While it is working good on Global zone. Below are commands from tsesbd02-zesbx01
root@tsesbd02-zesbx01:/# svcs -a svc:/system/system-log:default
svcs: -a ignored when used with arguments.... (13 Replies)
I have a T4-1 with Solaris 11.1, LDom ver 3.0.0.1 and I'm encountering two problems with zones.
I'd greatly appreciate help on these, especially the first one.
I have created multiple guest LDoms, all Solaris 11.1, and they all work fine.
The first problem is that I can not boot any... (9 Replies)
I have Solaris-10 server running ZFS file-system. ctdp04_vs03-pttmsp01 is one of the non global zone. I wanted to increase a /ttms/prod file-system of zone, which is actually /zone/ctdp04_vs03-pttmsp01/ttms/prod on global server.
I have added a new disk of 9 GB, which is emcpower56a and now I can... (16 Replies)
HI Community,
how can i configure audit logs for global zones and standard zone. i have enabled and started auditd service and it went to maintenance mode. please help me to configure that
Thanks & Regards,
BEn (9 Replies)