Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

keyctl(1) [sunos man page]

KEYCTL(1)						  Linux Key Management Utilities						 KEYCTL(1)

NAME
keyctl - Key management facility control SYNOPSIS
keyctl show keyctl add <type> <desc> <data> <keyring> keyctl padd <type> <desc> <keyring> keyctl request <type> <desc> [<dest_keyring>] keyctl request2 <type> <desc> <info> [<dest_keyring>] keyctl prequest2 <type> <desc> [<dest_keyring>] keyctl update <key> <data> keyctl pupdate <key> keyctl newring <name> <keyring> keyctl revoke <key> keyctl clear <keyring> keyctl link <key> <keyring> keyctl unlink <key> <keyring> keyctl search <keyring> <type> <desc> [<dest_keyring>] keyctl read <key> keyctl pipe <key> keyctl print <key> keyctl list <keyring> keyctl rlist <keyring> keyctl describe <keyring> keyctl rdescribe <keyring> [sep] keyctl chown <key> <uid> keyctl chgrp <key> <gid> keyctl setperm <key> <mask> keyctl session keyctl session - [<prog> <arg1> <arg2> ...] keyctl session <name> [<prog> <arg1> <arg2> ...] keyctl instantiate <key> <data> <keyring> keyctl pinstantiate <key> <keyring> keyctl negate <key> <timeout> <keyring> keyctl timeout <key> <timeout> keyctl security <key> DESCRIPTION
This program is used to control the key management facility in various ways using a variety of subcommands. KEY IDENTIFIERS
The key identifiers passed to or returned from keyctl are, in general, positive integers. There are, however, some special values with spe- cial meanings that can be passed as arguments: (*) No key: 0 (*) Thread keyring: @t or -1 Each thread may have its own keyring. This is searched first, before all others. The thread keyring is replaced by (v)fork, exec and clone. (*) Process keyring: @p or -2 Each process (thread group) may have its own keyring. This is shared between all members of a group and will be searched after the thread keyring. The process keyring is replaced by (v)fork and exec. (*) Session keyring: @s or -3 Each process subscribes to a session keyring that is inherited across (v)fork, exec and clone. This is searched after the process keyring. Session keyrings can be named and an extant keyring can be joined in place of a process's current session keyring. (*) User specific keyring: @u or -4 This keyring is shared between all the processes owned by a particular user. It isn't searched directly, but is normally linked to from the session keyring. (*) User default session keyring: @us or -5 This is the default session keyring for a particular user. Login processes that change to a particular user will bind to this session until another session is set. (*) Group specific keyring: @g or -6 This is a place holder for a group specific keyring, but is not actually implemented yet in the kernel. (*) Assumed request_key authorisation key: @a or -7 This selects the authorisation key provided to the request_key() helper to permit it to access the callers keyrings and instantiate the target key. COMMAND SYNTAX
Any non-ambiguous shortening of a command name may be used in lieu of the full command name. This facility should not be used in scripting as new commands may be added in future that then cause ambiguity. (*) Show process keyrings keyctl show This command recursively shows what keyrings a process is subscribed to and what keys and keyrings they contain. (*) Add a key to a keyring keyctl add <type> <desc> <data> <keyring> keyctl padd <type> <desc> <keyring> This command creates a key of the specified type and description; instantiates it with the given data and attaches it to the specified keyring. It then prints the new key's ID on stdout: testbox>keyctl add user mykey stuff @u 26 The padd variant of the command reads the data from stdin rather than taking it from the command line: testbox>echo -n stuff | keyctl padd user mykey @u 26 (*) Request a key keyctl request <type> <desc> [<dest_keyring>] keyctl request2 <type> <desc> <info> [<dest_keyring>] keyctl prequest2 <type> <desc> [<dest_keyring>] These three commands request the lookup of a key of the given type and description. The process's keyrings will be searched, and if a match is found the matching key's ID will be printed to stdout; and if a destination keyring is given, the key will be added to that keyring also. If there is no key, the first command will simply return the error ENOKEY and fail. The second and third commands will create a partial key with the type and description, and call out to /sbin/request-key with that key and the extra information supplied. This will then attempt to instantiate the key in some manner, such that a valid key is obtained. The third command is like the second, except that the callout information is read from stdin rather than being passed on the command line. If a valid key is obtained, the ID will be printed and the key attached as if the original search had succeeded. If there wasn't a valid key obtained, a temporary negative key will be attached to the destination keyring if given and the error "Requested key not available" will be given. testbox>keyctl request2 user debug:hello wibble 23 testbox>echo -n wibble | keyctl prequest2 user debug:hello 23 testbox>keyctl request user debug:hello 23 (*) Update a key keyctl update <key> <data> keyctl pupdate <key> This command replaces the data attached to a key with a new set of data. If the type of the key doesn't support update then error "Opera- tion not supported" will be returned. testbox>keyctl update 23 zebra The pupdate variant of the command reads the data from stdin rather than taking it from the command line: testbox>echo -n zebra | keyctl pupdate 23 (*) Create a keyring keyctl newring <name> <keyring> This command creates a new keyring of the specified name and attaches it to the specified keyring. The ID of the new keyring will be printed to stdout if successful. testbox>keyctl newring squelch @us 27 (*) Revoke a key keyctl revoke <key> This command marks a key as being revoked. Any further operations on that key (apart from unlinking it) will return error "Key has been revoked". testbox>keyctl revoke 26 testbox>keyctl describe 26 keyctl_describe: Key has been revoked (*) Clear a keyring keyctl clear <keyring> This command unlinks all the keys attached to the specified keyring. Error "Not a directory" will be returned if the key specified is not a keyring. testbox>keyctl clear 27 (*) Link a key to a keyring keyctl link <key> <keyring> This command makes a link from the key to the keyring if there's enough capacity to do so. Error "Not a directory" will be returned if the destination is not a keyring. Error "Permission denied" will be returned if the key doesn't have link permission or the keyring doesn't have write permission. Error "File table overflow" will be returned if the keyring is full. Error "Resource deadlock avoided" will be returned if an attempt was made to introduce a recursive link. testbox>keyctl link 23 27 testbox>keyctl link 27 27 keyctl_link: Resource deadlock avoided (*) Unlink a key from a keyring keyctl unlink <key> <keyring> This command removes a link to the key from the keyring. Error "Not a directory" will be returned if the destination is not a keyring. Error "Permission denied" will be returned if the keyring doesn't have write permission. Error "No such file or directory" will be returned if the key is not linked to by the keyring. Note that this only removes one key link from the keyring; any further links to the same key are not deleted. testbox>keyctl unlink 23 27 (*) Search a keyring keyctl search <keyring> <type> <desc> [<dest_keyring>] This command non-recursively searches a keyring for a key of a particular type and description. If found, the ID of the key will be printed on stdout and the key will be attached to the destination keyring if present. Error "Requested key not available" will be returned if the key is not found. testbox>keyctl search @us user debug:hello 23 testbox>keyctl search @us user debug:bye keyctl_search: Requested key not available (*) Read a key keyctl read <key> keyctl pipe <key> keyctl print <key> These commands read the payload of a key. "read" prints it on stdout as a hex dump, "pipe" dumps the raw data to stdout and "print" dumps it to stdout directly if it's entirely printable or as a hexdump preceded by ":hex:" if not. If the key type does not support reading of the payload, then error "Operation not supported" will be returned. testbox>keyctl read 26 1 bytes of data in key: 62 testbox>keyctl print 26 b testbox>keyctl pipe 26 btestbox> (*) List a keyring keyctl list <keyring> keyctl rlist <keyring> These commands list the contents of a key as a keyring. "list" pretty prints the contents and "rlist" just produces a space-separated list of key IDs. No attempt is made to check that the specified keyring is a keyring. testbox>keyctl list @us 2 keys in keyring: 22: vrwsl---------- 4043 -1 keyring: _uid.4043 23: vrwsl---------- 4043 4043 user: debug:hello testbox>keyctl rlist @us 22 23 (*) Describe a key keyctl describe <keyring> keyctl rdescribe <keyring> [sep] These commands fetch a description of a keyring. "describe" pretty prints the description in the same fashion as the "list" command; "rde- scribe" prints the raw data returned from the kernel. testbox>keyctl describe @us -5: vrwsl---------- 4043 -1 keyring: _uid_ses.4043 testbox>keyctl rdescribe @us keyring;4043;-1;3f1f0000;_uid_ses.4043 The raw string is "<type>;<uid>;<gid>;<perms>;<description>", where uid and gid are the decimal user and group IDs, perms is the permis- sions mask in hex, type and description are the type name and description strings (neither of which will contain semicolons). (*) Change the access controls on a key keyctl chown <key> <uid> keyctl chgrp <key> <gid> These two commands change the UID and GID associated with evaluating a key's permissions mask. The UID also governs which quota a key is taken out of. The chown command is not currently supported; attempting it will earn the error "Operation not supported" at best. For non-superuser users, the GID may only be set to the process's GID or a GID in the process's groups list. The superuser may set any GID it likes. testbox>sudo keyctl chown 27 0 keyctl_chown: Operation not supported testbox>sudo keyctl chgrp 27 0 (*) Set the permissions mask on a key keyctl setperm <key> <mask> This command changes the permission control mask on a key. The mask may be specified as a hex number if it begins "0x", an octal number if it begins "0" or a decimal number otherwise. The hex numbers are a combination of: Possessor UID GID Other Permission Granted ======== ======== ======== ======== ================== 01000000 00010000 00000100 00000001 View 02000000 00020000 00000200 00000002 Read 04000000 00040000 00000400 00000004 Write 08000000 00080000 00000800 00000008 Search 10000000 00100000 00001000 00000010 Link 20000000 00200000 00002000 00000020 Set Attribute 3f000000 003f0000 00003f00 0000003f All View permits the type, description and other parameters of a key to be viewed. Read permits the payload (or keyring list) to be read if supported by the type. Write permits the payload (or keyring list) to be modified or updated. Search on a key permits it to be found when a keyring to which it is linked is searched. Link permits a key to be linked to a keyring. Set Attribute permits a key to have its owner, group membership, permissions mask and timeout changed. testbox>keyctl setperm 27 0x1f1f1f00 (*) Start a new session with fresh keyrings keyctl session keyctl session - [<prog> <arg1> <arg2> ...] keyctl session <name> [<prog> <arg1> <arg2> ...] These commands join or create a new keyring and then run a shell or other program with that keyring as the session key. The variation with no arguments just creates an anonymous session keyring and attaches that as the session keyring; it then exec's $SHELL. The variation with a dash in place of a name creates an anonymous session keyring and attaches that as the session keyring; it then exec's the supplied command, or $SHELL if one isn't supplied. The variation with a name supplied creates or joins the named keyring and attaches that as the session keyring; it then exec's the supplied command, or $SHELL if one isn't supplied. testbox>keyctl rdescribe @s keyring;4043;-1;3f1f0000;_uid_ses.4043 testbox>keyctl session Joined session keyring: 28 testbox>keyctl rdescribe @s keyring;4043;4043;3f1f0000;_ses.24082 testbox>keyctl session - Joined session keyring: 29 testbox>keyctl rdescribe @s keyring;4043;4043;3f1f0000;_ses.24139 testbox>keyctl session - keyctl rdescribe @s Joined session keyring: 30 keyring;4043;4043;3f1f0000;_ses.24185 testbox>keyctl session fish Joined session keyring: 34 testbox>keyctl rdescribe @s keyring;4043;4043;3f1f0000;fish testbox>keyctl session fish keyctl rdesc @s Joined session keyring: 35 keyring;4043;4043;3f1f0000;fish (*) Instantiate a key keyctl instantiate <key> <data> <keyring> keyctl pinstantiate <key> <keyring> keyctl negate <key> <timeout> <keyring> These commands are used to attach data to a partially set up key (as created by the kernel and passed to /sbin/request-key). "instantiate" marks a key as being valid and attaches the data as the payload. "negate" marks a key as invalid and sets a timeout on it so that it'll go away after a while. This prevents a lot of quickly sequential requests from slowing the system down overmuch when they all fail, as all subsequent requests will then fail with error "Requested key not found" until the negative key has expired. The newly instantiated key will be attached to the specified keyring. These commands may only be run from the program run by request-key - a special authorisation key is set up by the kernel and attached to the request-key's session keyring. This special key is revoked once the key to which it refers has been instantiated one way or another. testbox>keyctl instantiate $1 "Debug $3" $4 testbox>keyctl negate $1 30 $4 The pinstantiate variant of the command reads the data from stdin rather than taking it from the command line: testbox>echo -n "Debug $3" | keyctl pinstantiate $1 $4 (*) Set the expiry time on a key keyctl timeout <key> <timeout> This command is used to set the timeout on a key, or clear an existing timeout if the value specified is zero. The timeout is given as a number of seconds into the future. testbox>keyctl timeout $1 45 (*) Retrieve a key's security context keyctl security <key> This command is used to retrieve a key's LSM security context. The label is printed on stdout. testbox>keyctl security @s unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 (*) Give the parent process a new session keyring keyctl new_session This command is used to give the invoking process (typically a shell) a new session keyring, discarding its old session keyring. testbox> keyctl session foo Joined session keyring: 723488146 testbox> keyctl show Session Keyring -3 --alswrv 0 0 keyring: foo testbox> keyctl new_session 490511412 testbox> keyctl show Session Keyring -3 --alswrv 0 0 keyring: _ses Note that this affects the parent of the process that invokes the system call, and so may only affect processes with matching credentials. Furthermore, the change does not take effect till the parent process next transitions from kernel space to user space - typically when the wait() system call returns. ERRORS
There are a number of common errors returned by this program: "Not a directory" - a key wasn't a keyring. "Requested key not found" - the looked for key isn't available. "Key has been revoked" - a revoked key was accessed. "Key has expired" - an expired key was accessed. "Permission denied" - permission was denied by a UID/GID/mask combination. SEE ALSO
keyctl(1), request-key.conf(5) Linux 17 Nov 2005 KEYCTL(1)
Man Page