ISBMEX(8) Network UPS Tools (NUT) ISBMEX(8)NAME
isbmex - Driver for ISBMEX UPS equipment
NOTE
This man page only documents the hardware-specific features of the isbmex driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports SOLA/BASIC Mexico ISBMEX protocol UPS equipment.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
AUTHOR
Edscott Wilson Garcia <edscott@imp.mx>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Tue Oct 22 2002 ISBMEX(8)
Check Out this Related Man Page
LIEBERT(8) NUT Manual LIEBERT(8)NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)
I need to use bash to convert sentences where all words start with a small letter into one where all words start with a capital letter.
So that a string like:
are utilities ready for hurricane sandy
becomes:
Are Utilities Ready For Hurricane Sandy (10 Replies)
Hi
I am new to this forum.
Any please help me to capture ctrl x and ctrl y via a bash script.
and please tell me how to clear the prompt via bash script
BR
Ramukumar M (4 Replies)
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
i know from the command line, the symbol $_ is used to get the last command that was run.
however, id like to replicate this within a script.
meaning, how do i do something like this:
#!/bin/sh
ps -ef | egrep talling
StoreThisLastCommandA=$_
awk '/error/ {print $3}' /tmp/test... (5 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
Hi Folks,
I feel that I should be posting this in the Unix for Dummies Forum and will probably wish I'd created an account and done just that - but here goes anyway.
I have two identical servers both Dell R430's both running RedHat Enterprise Server 7.4 and the same kernel, both have the same... (16 Replies)
Hi,
What is installation package and how to create it?
When we run:
in AIX:
installp package1
or
in Linux
rpm -ivh mypackage
What is package1 or mypackage in the abov examples and how to create them and deploy them?
I hope my question is clear enough.
Thank you (2 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)