update(8) System Manager's Manual update(8)NAME
update - Periodically updates the file system
SYNOPSIS
/sbin/update
DESCRIPTION
The update command flushes data from memory to disk every 30 seconds. This ensures that the file system is up to date in the event of a
system crash. This command is provided as a statically-linked executable in /sbin.
FILES
Specifies the command path
RELATED INFORMATION
Commands: init(8), sync(8)
Functions: sync(2), sync2(2) delim off
update(8)
Check Out this Related Man Page
sync2(2) System Calls Manual sync2(2)NAME
sync2 - Flush file system metadata and data from memory buffers to disk
SYNOPSIS
#include <sys/mount.h>
int sync2 (
unsigned int POLICY ,
char *path);
STANDARDS
Interfaces documented on this reference page conform to industry standards as follows:
sync2(): XSH5.0
Refer to the standards(5) reference page for more information about industry standards and associated tags.
PARAMETERS
Flush the file system memory buffers to disk. The argument is one of the following: Flush all memory buffers. Specifying this flag causes
the function to behave the same as the sync function. See sync(2). Flush all memory buffers except those under smooth sync control. The
name of a file system or fileset. Specify the optional path parameter when you want to have the POLICY act only on that file system
instead of all file systems. Specify a NULL argument when you want to have the POLICY act on all file systems.
DESCRIPTION
The sync2 function causes file system data to be flushed (written) to disk. Which memory buffers are flushed to disk depends on the POLICY
argument.
If the policy is SYNC_SYNCPOLICY, all memory buffers are flushed to disk. If the policy is SYNC_SMOOTHSYNCPOLICY, all memory buffers
except those under smooth sync control are flushed to disk.
To which file systems the POLICY argument applies depends on the path argument. To apply the policy to one file system, name it in the
path argument. To apply the policy to all file systems, specify the path argument as NULL.
The writing, although scheduled, is not necessarily complete upon return from the sync2 function.
RELATED INFORMATION
Functions: sync(2)
Commands: sync(8)
Standards: standards(5) delim off
sync2(2)
I have followed instructions to get the jdk for sparc, 1.3 loaded on this sparc workstation machine. I used a tar file and everything seemed to go fine. The usr/j2se directory was created with all the subdirectories and java files. However, attempting to run Java commands fails with a file not... (18 Replies)
Hi,
I am trying to update a MASTER file by a NEW file which may contain fewer records.
The update should use a key (2 first fields), here is a senario:
MASTER:
a;b;0
a;c;0
a;d;0
NEW:
a;c;1
the result should be:
a;b;0
a;c;1
a;d;0
can you recommend me a way to do it?
10x
Y.N. (25 Replies)
Hello, i am bit stuck with making script for automatic procedure.
Case:
Two files. One is flat file, other is csv file.
csv file has two column/fields with comma delimited data.
Here is what i need (explained way)
CSV file:
field1 | field2
"hello","byebye"
"hello2","byebye2"... (23 Replies)
I am writing a software product and hope that it will work on a variety of Linux distributions. At the moment, I am trying to create some kind of Linux version of patches/upgrades of installed software. Gathering information on available updates isn't hard, nor is installation of updates, but I... (27 Replies)
Hi,
I am running on Ubuntu 12 (precise) 64 bit and came to know that i cannot install any packages using apt-get and aptitude.
Linux test01 3.5.0-23-generic #35~precise1-Ubuntu SMP Fri Jan 25 17:13:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
But the same /etc/apt/sources.list file is... (20 Replies)
Hello,
I have a sun v880 that i got from ebay for cheap as a way to to learn Solaris and sun hardware in general.
The machine currently has OBP 4.7.0 2002/10/25 and i was wondering if there was a way to update the prom with out and active solaris install, as currently when i proceed with the... (29 Replies)
Hi All,
I'm completely new to bash scripting and still learning my way through albeit vey slowly.
I need to know where to insert my server names', my ip address numbers through out the script alas to no avail.
I'm also searching on how to save .sh (bash shell) script properly.... (25 Replies)
I am trying to match $1 in file1 with $2 in file2. If a match is found then $3 and $4 of file2 are copied to file1. Both files are tab-delimeted and I am getting a syntax error and would also like to update file1 in-place without creating a new file, but am not sure how. Thank you :).
file1
... (19 Replies)
Dears,
I have a listfile contains list of files path.
i need to read the line of the listfile
mv the file to other directory
and update the listfile by deleting the lines of the listfile.
#!/bin/bash
target=/fstest/INVESTIG/Sadiq/TEST_ARCH
while read -r line || ];
do
mv $line... (19 Replies)
Hey,
I moved the user information in the top right on the navbar to side panel and replace it with a clickable avatar image. If you have an avatar, you will see your avatar and if you don't you will see some default one (will change it to something better later).
If you have any notification... (53 Replies)
Hey,
Upgrade (step 1) the posts, by putting a "user info" icon in the top right and making it so it toggles the user info.
The user info icon has a badge which shows the number of posts. I will have to dig around in the code more to get the total posts thanks and other badges working; but... (22 Replies)