sys_attrs_dlpi(5) [osf1 man page]

sys_attrs_dlpi(5)						File Formats Manual						 sys_attrs_dlpi(5)

NAME

       sys_attrs_dlpi - DLPI subsystem attributes

DESCRIPTION

       This  reference page lists and describes attributes for the Data Link Provider Interface (dlpi) kernel subsystem. Refer to the sys_attrs(5)
       reference page for an introduction to the topic of kernel subsystem attributes.

	      Maximum number of open connections for the DLPI subsystem.

	      Default value: 128 (connections)

	      Minimum value: 1

	      Maximum value: 8192

	      Maximum number of protocols that DLPI supports. These are protocols that actually go through DLPI.

	      Default value: 6 (protocols)

	      Minimum value: 1

	      Maximum value: 64

SEE ALSO

       sys_attrs(5)

       Network Programmer's Guide

																 sys_attrs_dlpi(5)

sys_attrs_autofs(5)						File Formats Manual					       sys_attrs_autofs(5)

NAME

       sys_attrs_autofs - autofs subsystem attributes

DESCRIPTION

       This  reference	page lists and describes attributes for the AutoFS (autofs) kernel subsystem. Refer to the sys_attrs(5) reference page for
       an introduction to the topic of kernel subsystem attributes.

	      Specifies the duration (in seconds) that a file system is to remain mounted when not in use. This is analogous to the automount com-
	      mand's -tl option.

	      Default value: 300 (seconds)

	      Minimum value: 1

	      Maximum value: 100000000

	      Specifies  the  interval	(in seconds) between attempts to unmount file systems that have exceeded their idle_timeout limit. This is
	      analogous to the automount command's -tw option.

	      Default value: 60 (seconds)

	      Minimum value: 1

	      Maximum value: 100000000

	      Specifies the duration (in seconds) for which a mount failure is cached, preventing a retry of the mount during this time.

	      Default value: 30 (seconds)

	      Minimum value: 0

	      Maximum value: 100000000

	      Specifies the maximum amount of time (in seconds) a process waits for an auto-mounted file system or subtree to become available.

	      Default value: 120 (seconds)

	      Minimum value: 1

	      Maximum value: 100000000

	      Specifies the amount of time (in seconds) the autofsd daemon waites for an individual NFS server to respond to a mount request.

	      Default value: 30 (seconds)

	      Minimum value: 0

	      Maximum value: 100000000

	      Specifies the size of the AutoFS hash table used to find all AutoFS directories and symlinks system-wide. The size is calculated	at
	      boot time based upon the value of max_vnodes.

	      Default value: 32 (lists)

	      Minimum value: 32

	      Maximum value: 8192

SEE ALSO

       sys_attrs(5)

       System Configuration and Tuning

															       sys_attrs_autofs(5)