si3124(7D) Devices si3124(7D)NAME
si3124 - SiliconImage 3124/3132 SATA controller driver
SYNOPSIS
sata@unit-address
DESCRIPTION
The si3124 driver is a SATA framework-compliant HBA driver that supports Silicon Image 3124 and 3132 SATA controllers. Note that while the
Silicon Image controllers supports standard SATA features including SATA-II disks, NCQ, hotplug, port multiplier and ATAPI disks, the
si3124 driver currently does not support NCQ, port multiplier or ATAPI features.
CONFIGURATION
There are no tunable parameters in the si3124.conf file.
FILES
/kernel/drv/si3124 32-bit ELF kernel module (x86).
/kernel/drv/amd64/si3124 64-bit ELF kernel module. (x86).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWsi3124 |
+-----------------------------+-----------------------------+
SEE ALSO cfgadm(1M), prtconf(1M), cfgadm_sata(1M), attributes(5), nv_sata(7D), sata(7D)
Writing Device Drivers
SunOS 5.11 17 August 2007 si3124(7D)
Check Out this Related Man Page
ahci(7D) Devices ahci(7D)NAME
ahci - Advanced Host Controller Interface SATA controller driver
SYNOPSIS
sata@unit-address
DESCRIPTION
The ahci driver is a SATA framework-compliant HBA driver that supports SATA HBA controllers that are compatible with the Advanced Host Con-
troller Interface 1.0 specification. AHCI is an Intel-developed protocol that describes the register-level interface for host controllers
for serial ATA 1.0a and Serial ATA II. The AHCI 1.0 specification describes the interface between the system software and the host con-
troller hardware.
The ahci driver currently supports the Intel ICH6/7/8/9, VIA vt8251 and JMicron AHCI controllers which are compliant with the Advanced Host
Controller Interface 1.0 specification. Note that while the Intel ICH6/7/8/9, VIA vt8251 and JMicron AHCI controllers support standard
SATA features, the ahci driver currently only supports hard disk, ATAPI SATA DVD, hotplug and NCQ (Native command queuing). Port multiplier
and power management are not yet supported.
CONFIGURATION
The ahci module contains no user configurable parameters.
FILES
/kernel/drv/ahci
32-bit ELF kernel module (x86).
/kernel/drv/amd64/ahci
64-bit ELF kernel module (x86).
ATTRIBUTES
See attributes(5) for descriptions of the following attribute:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWahci |
+-----------------------------+-----------------------------+
SEE ALSO cfgadm(1M), cfgadm_sata(1M), prtconf(1M), sata(7D)
Advanced Host Controller Interface 1.0
Writing Device Drivers
NOTES
To bind the ahci driver to your controller, choose the [AHCI] BIOS option.
Note that booting is not supported if toggle exists between the [IDE] and [AHCI] BIOS options
SunOS 5.11 22 Jan 2008 ahci(7D)
Hi,
I have two sata hard-disks. Out of those, one is having RHEL5 operating system, and other is having fedora7 operating system.
When I connect the disk with RHEL5 operating system to sata0 port and disk with fedora7 operating system to sata1 port. While booting it shows RHEL5 boot screen,... (3 Replies)
Dear all,
I'm newbie in SCO. I already purchase SCO 5.0.7 and SATA Tape Drive (not SCSI) for IBM server. not a cheap investment :(
my problem is:
I can't use my sata tape on sco 5.0.7 for backup my data because sco can't detect any sata tape has been plug into o/s. i already running "mkdev... (7 Replies)
I have a dell poweredge sc430 (what ever that is). Came cheap with an 80 gig sata hard drive.
So maybe a year later I bought a 250 gig sata drive for backup (with rsynch from cron).
Rsynch works fine.
But now the machine won't reboot without me manually
pressing the F1 key.
I see a... (3 Replies)
Hello, hope my english will be sufficient to be clear enough...
I'm in progress on some script that should copy one big source file (200GB average) on one sata drive, to multiple (30+) sata drives.
Hardware is not the problem but copy performance is... If i launch all copy process at the same... (4 Replies)
Friends,
Could u please clarify how does a Solaris 10 machine recognize a SATA hard disk, SATA CD/DVD drives.
Will it recognize it like a SCSI? eg.c0t0d0 or like ide ? eg.c0d0
thank u. (11 Replies)
I want to install ubuntu on a seperate hard drive. I have two 500gb sata drives with XP on sata 0,0 and like to install ubuntu on the other sata 1,1.
A few questions:
Will this work?
Can I unplug the XP drive and boot up with ubuntu to 1,1?
If that works, how can I boot to... (6 Replies)
I had ACER aspiron one netbook with dual bootable (Windows XP and Debian). Recently I found XP is messy and Debian has new version published. I plan to recover XP and install new version of Debian. But I failed to recover XP from Hidden Partition.
I thought it is because I install GRUB in the... (15 Replies)
Hello everybody,
I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors.
The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my... (4 Replies)
Hi all
Can anybody offer any help with installing Openserver 6 on a Supermicro server?
I am familiar with installing OS5, but this is my first time with v6.
The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port... (11 Replies)
I have an upgrade path in mind for a new computer that will be stocked with a 2TB SATA 300 hard disk. This is a choice based on information that SATA 300 is not necessarily faster than SATA 600. The upgrade path in a year time or so would then involve the purchase of an SSD that would contain the... (4 Replies)
I am very new to SCO Unix so I apologize if this is a easy or dumb question.
I have a 160GB SATA hard drive and SATA CD-ROM drive connected to one of my systems. I have both the drives running in compatibility mode. I also have the hard drive set as a primary master and the CD-ROM drive set as... (10 Replies)
Hi,
I went to a computer store and the salesman sold me a SATA cable and told me that all SATA cables are the same. Another salesman at a different store told me a cable rated for SATA 2, which I bought, MIGHT work as well as one rate for SATA 3 but it is not guaranteed. I decided to run a... (3 Replies)
We recently moved our netapp disks onto new infrastructure by attaching the new controllers to our fibre switch and netapp migrating the disks. Disks kept the same address. We originally had 4 paths, but after attaching the new controllers we had 8. Now I want to remove the old paths. But can't. ... (5 Replies)