amr(7D) Devices amr(7D)NAME
amr - SCSI HBA driver for Dell PERC 3/DC, 4/SC, 4/DC and 4/DI
DESCRIPTION
The amr plain SCSI host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 3DC/4SC/4DC/4Di RAID devices.
The amr driver ports from FreeBSD and only supports basic RAID disk I/O functions.
DRIVER CONFIGURATION
There are no user configurable parameters available. Please configure your hardware through BIOS.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |x86 |
+-----------------------------+-----------------------------+
FILES
/kernel/drv/amr 32-bit ELF kernel module.
/kernel/drv/amd64/amr 64-bit kernel module (x86 only).
/kernel/drv/amr.conf Driver configuration file (contains no user-configurable options).
SEE ALSO prtconf(1M), attributes(5), lsimega(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S),
scsi_device(9S), scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 20 April 2005 amr(7D)
Check Out this Related Man Page
aac(7D) Devices aac(7D)NAME
aac - SCSI HBA driver for Adaptec AdvancedRAID Controller
DESCRIPTION
The aac plain SCSI host bus adapter driver is a SCSA-compliant nexus driver that supports the Adaptec 2200S/ 2120S SCSI RAID card and Dell
PERC 3Di SCSI RAID controller.
The aac driver ports from FreeBSD and only supports basic RAID disk I/O functions.
DRIVER CONFIGURATION
There are no user configurable parameters available. Please configure your hardware through BIOS.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |x86 |
+-----------------------------+-----------------------------+
FILES
/kernel/drv/aac
32-bit ELF kernel module
/kernel/drv/aac.conf
Configuration file. (Contains no user-configurable options).
SEE ALSO prtconf(1M), attributes(5), scsi_hba_attach(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_device(9S), scsi_inquiry(9S), scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.10 18 Aug 2004 aac(7D)
I'm trying to get RedHat 7.0 working on a Dell Latitude c600/c610 working. Well the graphics driver anyway.
See no matter what I configure it wont work. Run Xconfigurator and it wont have the right drivers installed for me to pick etc etc. So I'll run Xconfigurator get a generic driver,... (1 Reply)
I'm trying to load SCO Unix 5.0.2 on a Dell 1500SC server, without any success. First off, yes I know that 5.0.2 is an outdated version, and is not supported anymore, but that is what my company has directed me to do. The problem with the load appears to be the new chipset on the server,... (1 Reply)
Hello all,
I'm new to RAID and would like to know if anyone had works with Dell PERC3 RAID controller. I'm having a problem install the driver on REDHAT AS 3.0. All the drivers from dell only support up to AS 2.1. Does anyone know if the controller is from LSI Logic. If so which mode?
I'm... (4 Replies)
Hi,
I need help!! I am trying to monitoring the temperature and error rate for diffrent storage systems - hard disk, SCSI, RAIDs.
For, Hard disk, smartctl works perfectly, but in case of SCSI and RAIDs, it fails.
smartctl notify only about the storage systems, health (i.e., OK,etc) but not... (0 Replies)
Sorry if this post is in the wrong location. I'm trying to pull some files off of an old Dell box. I've not been able to get it to boot off of the HD, so I tried to use Knoppix. At boot time; I get the following error:
Loading spec packet failed, trying to wing it
isolinux 2.04: failed to... (3 Replies)
Trying to install Sco OSR 6.0 on Dell Optiplex with SERIAL ATA ADADPTEC 1210SA controller.
Sco says its sipported by the AACRAID driver but on installation its says that it doesnt recognise the partitions
In the middle of re-formatting at the moment - just wondered if anyone had anu... (0 Replies)
I'am new to this and want to learn more.
I would like to load SCO 5.0.7 on a dell poweredge 6350 with quad Xeon processors 3 drives with 2 meg mem, SCSI 7890, 7860 .
the problem comes when ths software does its system check, confus
it gets to a point, and shows F Bladinit , then stops and shuts... (1 Reply)
Hello all,
I'am experiencing weird relyability problems with a SCO 6.0 Openserver server that runs on a Dell Poweredge 1800 equipped with a PERC DC4 raid controller and 4 36 GB 15 K rpm hot swappable scsi harddisks.
It runs a RAID 10 configuration.
It uses the mega hba, Revision 8.03a Release... (1 Reply)
I tried searching a bit. After a lot of confusion, I'm just going to be blunt. Can anyone recommended study materials for the SCSA exam? I don't want to cheat with testkings, I just want Study Material Recommendations..
Thank you. (1 Reply)
Hi,
Is anyone familiar with the Dell 8200 case? I am a first year IST major, so while I should be able to answer these questions myself, never hurts to have another opinion.
I'm looking to build a desktop. I have an old Dell 8200. The case is somewhat sentimental to me as it was my first... (5 Replies)
Hey, y'all ...
Happily sort of between gigs ...
And, owing to some thoughts about reviving a pile of hardware (a Dell lap top and a clone PC, bla, blah, etc.) ... thought I would embark on reviving / catching up on the UX side of things. I haven't done command line OS stuff for many years,... (3 Replies)