audial(1) [opensolaris man page]

AUDIAL(1)						      General Commands Manual							 AUDIAL(1)

NAME

       audial - generate or recognize touch tones for North American telephones

SYNOPSIS

       audial [-audio servername] [-volume 0-100] [-spacing milliseconds] [-pause milliseconds] [-duration milliseconds] dialstring

       audial -recognize [-microphone] [-gain 0-100] [-time seconds]

DESCRIPTION

       The  audial  program generates touch tones suitable for dialing a North American telephone.  audial can also recognize touch tones and pro-
       duce the corresponding string.

GENERAL OPTIONS

       The following options may be used in either dial or recognition mode:

       -audio servername
	       This option specifies the Network Audio System server on which the files should be played.

DIAL OPTIONS

       The following options may be used in dial mode:

       -volume 0-100
	       This option specifies the volume at which the data should be played as a percentage of the maximum possible volume.  The default is
	       100 percent.

       -spacing milliseconds
	       This option specifies the number of milliseconds to wait in between each digit.	The default is 100.

       -pause milliseconds
	       This option specifies the number of milliseconds to wait whenever a comma (,) is used in a dial string.	The default is 400.

       -duration milliseconds
	       This option specifies the duration of each tone in milliseconds.  The default is 100.

DIALING STRING

       The following characters may be used in a dialing string:

       0123456789*#
	       The corresponding touch tone is generated.

       abcd    Tones representing the 4 "function" keys often found on a keypad are generated.

       ,       A blank tone whose length is specified by the -pause option is generated.

       Any other characters are ignored.

RECOGNITION OPTIONS

       -recognize
	       Enables	recognition mode.  audial will attempt to recognize touch tones from the input device and output the corresponding charac-
	       ter.

       -microphone
	       Use microphone gain levels on the audio input device.  If a microphone is plugged into the audio input jack, this option should	be
	       used.

       -gain 0-100
	       This option specifies the input gain level.  The default is 95.

       -time seconds
	       This option specifies how long to attempt the recognition.  The default is forever.

ENVIRONMENT VARIABLES

       The following environment variables are used by audial:

       AUDIOSERVER
	       This specifies the name of default audio server to contact if no name is explicitly given on the command line.

       DISPLAY This  specifies	the  name  of  an X Window System display that should be assumed to also have a corresponding Network Audio System
	       server.

SEE ALSO

       nas(1)

COPYRIGHT

       Copyright 1993, 1994 Network Computing Devices, Inc.

AUTHORS

       Greg Renda, Network Computing Devices, Inc.
       Kevin Martin, Network Computing Devices, Inc.

								       1.9.3								 AUDIAL(1)

Check Out this Related Man Page

AUCTL(1)						      General Commands Manual							  AUCTL(1)

NAME

       auctl - control various audio server parameters

SYNOPSYS

       auctl [-audio servername] [-q] [command...]

DESCRIPTION

       The  auctl  program can be used to control various audio server parameters.  It is typically used when connecting up new devices, or to set
       user preferences.  If no command is specified on the program command line, auctl reads commands from the standard output.  If the  standard
       input and standard output are both attached to a terminal, an interactive prompt is provided.

OPTIONS

       The following options may be used with auctl:

       -audio servername
	       This option specifies the Network Audio System server on which the files should be played.

       -q      This option indicates that no prompt should be given when reading commands from the standard input.

COMMANDS

       The following commands may be used with auctl:

       help    This command prints a list of the commands that may be given.

       set device id gain [=,+,-] percent
	       With  =,  this command sets the gain on the device specified by id to the indicated percentage, or alters it by the given number of
	       percentage points if + or - is used.  If the id is a decimal number n, the nth device returned by the server (see auinfo) is  used.
	       Otherwise, id should be a hexidecimal number specifying the resource identifier of the desired device.

       set device id linemode = low
	       This command sets the linemode of the device specified by id to the lower setting appropriate for microphones.

       set device id linemode = hi
	       This command sets the linemode of the device specified by id to the higher setting appropriate for CD players.

       list device id gain
	       This command lists the gain of the specified device in the form needed to set it.

       list device id linemode
	       This command lists the line mode of the specified device in the form needed to set it.

       list device id
	       This command lists the gain and line mode of the specified device.

       quit, exit, or ^D
	       Either of these commands or an end of file causes the program to exit.

ENVIRONMENT VARIABLES

       The following environment variables are used by auctl:

       AUDIOSERVER
	       This specifies the name of default audio server to contact if no name is explicitly given on the command line.

       DISPLAY This  specifies	the  name  of  an X Window System display that should be assumed to also have a corresponding Network Audio System
	       server.

SEE ALSO

       nas(1), auplay(1), audial(1), audemo(1), autool(1)

COPYRIGHT

       Copyright 1993, 1994 Network Computing Devices, Inc.

AUTHOR

       Jim Fulton, Network Computing Devices, Inc.

								       1.9.3								  AUCTL(1)

Linux and UNIX Man Pages

audial(1) [opensolaris man page]

Check Out this Related Man Page