snmp_pdus(3erl) Erlang Module Definition snmp_pdus(3erl)
NAME
snmp_pdus - Encode and Decode Functions for SNMP PDUs
DESCRIPTION
RFC1157, RFC1905 and/or RFC2272 should be studied carefully before using this module, snmp_pdus .
The module snmp_pdus contains functions for encoding and decoding of SNMP protocol data units (PDUs). In short, this module converts a list
of bytes to Erlang record representations and vice versa. The record definitions can be found in the file snmp/include/snmp_types.hrl . If
snmpv3 is used, the module that includes snmp_types.hrl must define the constant SNMP_USE_V3 before the header file is included. Example:
-define(SNMP_USE_V3, true).
-include_lib("snmp/include/snmp_types.hrl").
Encoding and decoding must be done explicitly when writing your own Net if process.
EXPORTS
dec_message([byte()]) -> Message
Types Message = #message
Decodes a list of bytes into an SNMP Message. Note, if there is a v3 message, the msgSecurityParameters are not decoded. They must
be explicitly decoded by a call to a security model specific decoding function, e.g. dec_usm_security_parameters/1 . Also note, if
the scopedPDU is encrypted, the OCTET STRING encoded encryptedPDU will be present in the data field.
dec_message_only([byte()]) -> Message
Types Message = #message
Decodes a list of bytes into an SNMP Message, but does not decode the data part of the Message. That means, data is still a list of
bytes, normally an encoded PDU (v1 and V2) or an encoded and possibly encrypted scopedPDU (v3).
dec_pdu([byte()]) -> Pdu
Types Pdu = #pdu
Decodes a list of bytes into an SNMP Pdu.
dec_scoped_pdu([byte()]) -> ScopedPdu
Types ScopedPdu = #scoped_pdu
Decodes a list of bytes into an SNMP ScopedPdu.
dec_scoped_pdu_data([byte()]) -> ScopedPduData
Types ScopedPduData = #scoped_pdu | EncryptedPDU
EncryptedPDU = [byte()]
Decodes a list of bytes into either a scoped pdu record, or - if the scoped pdu was encrypted - to a list of bytes.
dec_usm_security_parameters([byte()]) -> UsmSecParams
Types UsmSecParams = #usmSecurityParameters
Decodes a list of bytes into an SNMP UsmSecurityParameters
enc_encrypted_scoped_pdu(EncryptedScopedPdu) -> [byte()]
Types EncryptedScopedPdu = [byte()]
Encodes an encrypted SNMP ScopedPdu into an OCTET STRING that can be used as the data field in a message record, that later can be
encoded with a call to enc_message_only/1 .
This function should be used whenever the ScopedPDU is encrypted.
enc_message(Message) -> [byte()]
Types Message = #message
Encodes a message record to a list of bytes.
enc_message_only(Message) -> [byte()]
Types Message = #message
Message is a record where the data field is assumed to be encoded (a list of bytes). If there is a v1 or v2 message, the data field
is an encoded PDU , and if there is a v3 message, data is an encoded and possibly encrypted scopedPDU .
enc_pdu(Pd) -> [byte()]
Types Pdu = #pdu
Encodes an SNMP Pdu into a list of bytes.
enc_scoped_pdu(ScopedPdu) -> [byte()]
Types ScopedPdu = #scoped_pdu
Encodes an SNMP ScopedPdu into a list of bytes, which can be encrypted, and after encryption, encoded with a call to
enc_encrypted_scoped_pdu/1 ; or it can be used as the data field in a message record, which then can be encoded with enc_mes-
sage_only/1 .
enc_usm_security_parameters(UsmSecParams) -> [byte()]
Types UsmSecParams = #usmSecurityParameters
Encodes SNMP UsmSecurityParameters into a list of bytes.
Ericsson AB snmp 4.19 snmp_pdus(3erl)