disable_clerk(1m) [hpux man page]

disable clerk(1m)														 disable clerk(1m)

NAME

       disable clerk - Stops the clerk on the local system

SYNOPSIS

       cdscp disable clerk

DESCRIPTION

       The  disable  clerk  command  stops  the  clerk on the local system, causing all active communication with any server to be aborted and all
       client calls in progress to fail.  The clerk cache is copied to disk.

   Privilege Required
       You must have write permission to the clerk.

NOTES

       If you are disabling a clerk on a system where a server is running, make sure you disable the server first.

       This command may be replaced in future releases by the dcecp command, and may no longer be supported at that time.

EXAMPLES

       The following command stops the clerk on the local server system: cdscp> disable clerk

RELATED INFORMATION

       Command: show clerk(1m)

																 disable clerk(1m)

define cached server(1m)												  define cached server(1m)

NAME

       define cached server - Creates knowledge of a server in the local clerk's cache

SYNOPSIS

       cdscp define cached server name tower value

ARGUMENTS

       A  simple  name	for the cached server.	The protocol sequence and network address of the server node. The format is protocol-sequence:net-
       work-address.  A protocol-sequence is a character string identifying the network protocols used	to  establish  a  relationship	between  a
       client  and  server.   There  are  two  choices	of  protocol  sequence,  depending on the network address that is supplied in the binding:
       ncacn_ip_tcp or ncadg_ip_udp.  For the network-address, specify an Internet address using the common Internet address notation.	 For  more
       information about this format, see the RPC introduction in the DCE Application Development Reference.

DESCRIPTION

       The define cached server command creates knowledge of a server in the local clerk's cache.  This command is typically used to manually pro-
       vide configuration information to a clerk that cannot automatically configure itself.  This is required, for instance, to  give	the  clerk
       addressing information about a server across a WAN. Once the clerk knows about one server, it can find other servers through referrals.

   Privilege Required
       You must have write permission to the clerk.

NOTE

       This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.

EXAMPLES

       The  following  command	creates  knowledge  of	the  server  nrl  in  the  local  clerk's  cache:  cdscp>  define  cached server nrl tower
       ncacn_ip_tcp:16.20.15.25

RELATED INFORMATION

       Commands: clear cached server(1m), dump clerk cache(1m), show cached server(1m)

       Books: OSF DCE Application Development Reference

															  define cached server(1m)