vparremove(1m) [hpux man page]

vparremove(1M)															    vparremove(1M)

NAME

       vparremove - remove a virtual partition

SYNOPSIS

       vp_name db_file]

DESCRIPTION

       The command deletes a virtual partition previously created using the command.  All resources associated with the virtual partition are made
       available for allocation to other partitions.

       Unintentional use of this command has serious consequences; therefore the user is prompted to confirm  the  operation  unless  the  (force)
       option is specified.

   Options
       recognizes the following command line options and arguments:

       Specifies the unique name of the virtual partition which
		      is to be removed.  Required.

       Removes a virtual partition from the partition database
		      contained  in  db_file.	If  this option is omitted, the virtual partition is removed from the monitor's database.  In this
		      case, the partition must be in the state to be removed.  Thus it is an error to try to remove the current virtual partition,
		      the one in which the command is executing.

       Specifies the force option.
		      Omits  the  confirmation dialog before removing the virtual partition.  This option is intended for use by scripts and other
		      non-interactive applications.

SECURITY RESTRICTIONS

       This command is restricted to processes owned by superuser.

       When virtual partition flexible administrative capability is enabled, a virtual partition can only be removed  from  within  a  Designated-
       Admin vPar.

RETURN VALUE

       The command exits with one of the following values:

       Successful completion.
       One or more error conditions occurred.

EXAMPLES

       Destroy the virtual partition in the partition database currently running in the monitor:

       Destroy the virtual partition in the partition database currently running in the monitor using the force option:

       Delete partition in partition database file

ERRORS

       displays error messages on standard error for any of the following conditions:

	      o  db_file does not exist, cannot be accessed, is not a virtual partition database file, or is corrupt.

	      o  vp_name does not exist in the monitor's database or in db_file.

	      o  vp_name in the monitor's database is in some state other than

	      o  The command and the virtual partition monitor are at different revision levels.

	      o  When  the  virtual  partition	flexible administrative capability is enabled and the local virtual partition is not a Designated-
		 Admin vPar.

AUTHOR

       was developed by the Hewlett-Packard Company.

SEE ALSO

       vparadmin(1M), vparboot(1M), vparconfig(1M), vparcreate(1M), vpardump(1M), vparefiutil(1M), vparenv(1M),  vparextract(1M),  vparmodify(1M),
       vparreloc(1M), vparreset(1M), vparstatus(1M), vparutil(1M), vparresources(5), vpartition(5), vpmon(5).

																    vparremove(1M)

Check Out this Related Man Page

vparutil(1M)															      vparutil(1M)

NAME

       vparutil - get and set SCSI parameters for SCSI controllers from a virtual partition

SYNOPSIS

       dev_path

       dev_path

       dev_path scsi_id] scsi_rate]

DESCRIPTION

       The  command gets and sets SCSI parameters for SCSI controllers within a running virtual partition.  When setting the SCSI parameters using
       the option, the virtual partition which owns the specified SCSI controller must be in the down state.  If not, the command will	fail  with
       the appropriate error code.

       The  SCSI parameters for a given SCSI controller must first be set (from the firmware BCH prompt or using the option) before the parameters
       can be retrieved using the option.

       The command is allowed on Itanium(R)-based platforms for compatibility.	No action is taken for the command.

   Options
       recognizes the following command-line options:

       Deletes an entry for the specified SCSI controller at
	     dev_path from the SCSI table.

       Gets the SCSI parameters for the specified SCSI controller at
	     dev_path.

       Sets the SCSI parameters for the specified SCSI controller at
	     dev_path.

   Operands
       recognizes the following command-line operands:

       dev_path        The device path of the SCSI controller.

       id	       The SCSI ID for the specified controller (defaults to 7).

       rate	       The SCSI rate for the specified controller.  This parameter can have one of two values: for the corresponding fast wide and
		       ultra wide SCSI interfaces.

   Note
       For managing SCSI controllers, use corresponding SCSI utilities.  For further information refer to

SECURITY RESTRICTIONS

       This command is restricted to processes owned by superuser.

       When  virtual  partition  flexible administrative capability is enabled, only a Designated-Admin vPar can set SCSI parameters for SCSI con-
       trollers.

EXAMPLES

       Set the SCSI ID for controller at 0/0/2/0 to 3 with the fast wide rate:

RETURN VALUE

       Successful.
       Invalid SCSI controller specification.
       Invalid SCSI ID.
       Could not communicate with virtual partition monitor.
       Virtual partition which owns SCSI controller is not in down state.
       Internal firmware call failed.
       Other error.

AUTHOR

       was developed by the Hewlett-Packard Company.

SEE ALSO

       vparadmin(1M), vparboot(1M), vparcreate(1M), vparconfig(1M), vpardump(1M), vparefiutil(1M), vparenv(1M),  vparextract(1M),  vparmodify(1M),
       vparreloc(1M), vparremove(1M), vparreset(1M), vparstatus(1M), vparresources(5), vpartition(5), vpmon(5).

																      vparutil(1M)

Linux and UNIX Man Pages

vparremove(1m) [hpux man page]

Check Out this Related Man Page