SG_RDAC(8) SG3_UTILS SG_RDAC(8)NAME
sg_rdac - Display or Modify RDAC Redundant Controller Page
SYNOPSIS
sg_rdac [-a] [-f=LUN] [-v] [-V] DEVICE
DESCRIPTION
sg_rdac displays or modifies the RDAC controller settings via the Redundant Controller Page (0x2C). When modifying the settings it allows
to transfer the ownership of individual drives to the controller the command was received on.
OPTIONS -a Transfer all (visible) devices
-f=LUN Transfer the device identified by LUN. This command will only work if the controller supports 'Dual Active Mode' (aka active/active
mode).
-v be verbose
-V print version string then exit
EXIT STATUS
The exit status of sg_rdac is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
AUTHOR
Written by Hannes Reinecke <hare at suse dot com>, based on sg_emc_trespass.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2006-2007 Hannes Reinecke, Douglas Gilbert.
This software is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
sg3_utils-1.23 January 2007 SG_RDAC(8)
Check Out this Related Man Page
SG_EMC_TRESPASS(8) SG3_UTILS SG_EMC_TRESPASS(8)NAME
sg_emc_trespass - Changes ownership of a LUN from another Service-Processor to this one.
SYNOPSIS
sg_emc_trespass [-d] [-hr] [-s] [-V] DEVICE
DESCRIPTION
sg_emc_trespass sends an EMC-specific Trespass Command to the DEVICE with the selected options. This Mode Select changes the ownership of
the LUN of the device from another Service-Processor to the one the command was received on.
OPTIONS
Arguments to long options are mandatory for short options as well.
-d outputs some extra debug information associated with executing this command
-hr Sets the 'Honor Reservation' bit in the command. If set, the trespass will only succeed to change the ownership from the Peer SP if
the Peer SP does not have an outstanding SCSI reservation for the LUN. By default, the reservation state will be ignored.
-s Send the short version of the trespass command instead of the long version. The short version is supported on the EMC FC5300, FC4500
and FC4700. The long version (default) is supported on the CLARiiON CX and AX family arrays.
-V print out version string then exit.
In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the 2.6 series block devices (e.g. SCSI disks and DVD
drives) can also be specified. For example "sg_start 0 /dev/sda" will work in the 2.6 series kernels.
EXIT STATUS
The exit status of sg_emc_trespass is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
AUTHOR
Written by Lars Marowsky-Bree, based on sg_start.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2004 Lars Marowsky-Bree, Douglas Gilbert.
This software is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
sg3_utils-1.23 January 2007 SG_EMC_TRESPASS(8)
Hi
I would like to ask what the benefits are of changing from RDAC to MPIO when connecting to a DS4000 on AIX 5.3? I have heard that IBM MPIO "might" support more than 1 active path to a LUN when connecting to a DS4800 through more than 1 host connection on the same AIX client. I understand that... (8 Replies)
Hello,
I want monting a LUN on a RX2660
I have created a LUN of 100Go with HP StorageWorks EVA and associated to my server.
For the moment I see it with the command below but after i can't used it
# ioscan -fnkC disk
Class I H/W Path Driver S/W State H/W Type Description ... (10 Replies)
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
hello,
i am an oracle DBA and trying to scan a newly created LUN of 200 GB on fiber channel by SAN admin.we have solaris 10 and SANtoolkit is installed.i tried following to get the new LUN at my machine. go /opt/Netapp/Santoolkit/bin and then ./sanlun lun show but i see only the existing... (12 Replies)
Hi,
I created a new vdisk and presented it to a BL460c class server. The LUN was successfully created and presented.
My problem however is that I am unable to see the newly added LUN on my OS? I have rebooted the box but no joy.
Just wondering if you have any ideas on how this can be... (5 Replies)
Hi All,
I am new for this blog and this is my first Query on this blog. I would like to dael with graet masters on linux.
Here we go,
After storage people created the LUN, How to add that LUN to Linux server. (Make that LUN visibility on linux server.) ?
How to view the LUN... (5 Replies)
Hi,
I have presented a LUN from my EVA 4400 to a RHEL server.
The server sees 4 paths to the LUN which I can see from fdisk.
If I want to add this LUN to my OS i.e.
# fdisk /dev/sd???
....which actual device do I run fdisk against?
I am running multipath so is there... (12 Replies)
I have a LUN (From HP-Storage VA7110) that is claimed on 2 servers, but is in used in one of the VG on Server-1 .
Now I want to shut Server-1 and re-use that LUN on server-2 .
Server-1
Path-1 : /dev/rdsk/c4t0d1
Path-2: /dev/rdsk/c6t0d1
Server-2
Path-1: /dev/rdsk/c5t0d1
Path-2:... (8 Replies)
I'm pulling down some LUN usage data once per day. I store the data in a file name that matches the name of the LUN. Then I just append new usage amounts to the same file each day.
Filename might be serv01_luna, serv01_lunb, serv01_lunc, etc, etc.
Inside the file it would like the following... (7 Replies)
Hi
Please I dont have a lot of redhat skills, but I need some help on creating a file system.
I need to rescan for this new LUN, so I try to check existing LUNs:
fdisk -l
Disk /dev/sda: 299.4 GB, 299439751168 bytes
255 heads, 63 sectors/track, 36404 cylinders
Units = cylinders of... (8 Replies)
Hello,
We have IBM storwize v7000 storage. I have created thin provisioned LUN and attached it to my server(dell r910, Centos 7).
Whenever I copy files in that LUN correspondingly Thin provisioned LUN's used space increases but when I remove files to free up space the LUN's size isn't... (5 Replies)
Hi all, I have a LUN that is in "Online Busy" when I issue the dev_gestate subcommand of luxadm:
root@es088wb6:~# luxadm -v -e dev_getstate /dev/rdsk/c21t50050763090887FEd4s2
phys path = "/devices/pci@6c0/pci@1/pci@0/pci@4/SUNW,qlc@0/fp@0,0/ssd@w50050763090887fe,4:c,raw"
... (5 Replies)
I have NetApp LUN that was presented to a Red Hat Enterprise Linux Server release 5.7 (Tikanga) machine.
But this LUN has already data, because it was being used on another server.
I can see the new LUN when running fdisk:
fdisk -l | egrep '^Disk' | egrep -v 'dm-' | grep -v identifier
Disk... (15 Replies)
Could you please let me know, how to install and configure samba as domain controller like Active Directory (AD Server in Windows Server)?
And how to configure the Window clients and Linux clients through Samba AD Domain Controller.
Note: OS is Ubuntu or CentOS. (8 Replies)