OCF_HEARTBEAT_SENDAR(7) OCF resource agents OCF_HEARTBEAT_SENDAR(7)NAME
ocf_heartbeat_SendArp - Broadcasts unsolicited ARP announcements
SYNOPSIS
SendArp [start | stop | monitor | meta-data | validate-all]
DESCRIPTION
This RA can be used _instead_ of the IPaddr2 or IPaddr RA to send gratuitous ARP for an IP address on a given interface, without adding the
address to that interface. For example, if for some resaon you wanted to send gratuitous ARP for addresses managed by IPaddr2 or IPaddr on
an additional interface.
SUPPORTED PARAMETERS
ip
The IP address for sending ARP packet. (required, string, no default)
nic
The NIC for sending ARP packet. (required, string, no default)
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 20s.
stop
Stops the resource. Suggested minimum timeout: 20s.
monitor
Performs a detailed status check. Suggested minimum timeout: 20. Suggested interval: 10.
meta-data
Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.
validate-all
Performs a validation of the resource configuration. Suggested minimum timeout: 20s.
EXAMPLE
The following is an example configuration for a SendArp resource using the crm(8) shell:
primitive p_SendArp ocf:heartbeat:SendArp
params
ip=string
nic=string
op monitor depth="0" timeout="20" interval="10"
SEE ALSO
http://www.linux-ha.org/wiki/SendArp_(resource_agent)
AUTHOR
Linux-HA contributors (see the resource agent source for information about individual authors)
resource-agents UNKNOWN 03/09/2014 OCF_HEARTBEAT_SENDAR(7)
Check Out this Related Man Page
OCF_HEARTBEAT_SENDAR(7) OCF resource agents OCF_HEARTBEAT_SENDAR(7)NAME
ocf_heartbeat_SendArp - Broadcasts unsolicited ARP announcements
SYNOPSIS
SendArp [start | stop | monitor | meta-data | validate-all]
DESCRIPTION
This script send out gratuitous Arp for an IP address
SUPPORTED PARAMETERS
ip
The IP address for sending arp package. (required, string, no default)
nic
The nic for sending arp package. (required, string, no default)
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 20s.
stop
Stops the resource. Suggested minimum timeout: 20s.
monitor
Performs a detailed status check. Suggested minimum timeout: 20. Suggested interval: 10.
meta-data
Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.
validate-all
Performs a validation of the resource configuration. Suggested minimum timeout: 20s.
EXAMPLE
The following is an example configuration for a SendArp resource using the crm(8) shell:
primitive example_SendArp ocf:heartbeat:SendArp
params
ip=string
nic=string
op monitor depth="0" timeout="20" interval="10"
SEE ALSO
http://www.linux-ha.org/wiki/SendArp_(resource_agent)
AUTHOR
Linux-HA contributors (see the resource agent source for information about individual authors)
resource-agents 1.0.3 07/05/2010 OCF_HEARTBEAT_SENDAR(7)
Hi everybody,
I want to know if there is a command for solaris or linux to have nic answers, like:
register entity
technical contact
an so on, for a domain.
I know I can do that fron the nic's site, but some guy told me there is a command to do that, but I forget it.
I try dig, host,... (2 Replies)
Hello,
Trying to solve a nic driver problem on RH linux with kernel 2.4.20-8. I seems that make it is looking in the place for the nic driver. Here is what I have tried and the result errors. Please ignore typos.
modeprobe tulip
/lib/modules/2.4.20-8/kernel/drivers/net/tulip/tulip.o:... (0 Replies)
All,
I see that there are 2 nic card available . How can I know all the details about these 2 nic cards.
-rw-r--r-- 1 root root 10 Apr 16 15:00 hostname.bge0
-rw-r--r-- 1 root other 17 Apr 22 08:56 hostname.bge2
please let me know
thanks
-prasad (4 Replies)
Hello
I have 2 machines with 3 NIC cards.
When I setup veritas, I receive this message:
e1000g1 has an IP address configured on it. It could be a public NIC on ken.
Are you sure you want to use e1000g1 for the first private heartbeat link?
As if e1000g1 should not have an IP address.... (2 Replies)
Hi , I came across a SUN server whereby it was installed with additional ethernet card. By right in any configuration, you would probably see the onboard ports Net0,Net1 and so on should correspond to e1000g0,e1000g1...
But instead the ext PCI takes precedence in the order and the Net0 becomes... (3 Replies)
I was wondering if anybody had any ports for macports that they particularly liked and wanted to recommend - I'm looking for some more stuff to play around with. (0 Replies)
Hi,
What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..?
Thanks (2 Replies)
Hi,
I wondering about intel and dlink gigabyte desktop nic card price point, May i ask if someone know the difference between the two gigabyte nic card, I found at my local electronic store that theres a price difference between the two the intel is double the price of the dlink although the... (4 Replies)
Hi Guys,
Kindly advise how to fix the down interface status in MC.
Physically all nic interfaces are ok but as cmviewcl some interface are down:
Node 1:
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up ... (0 Replies)
hi guys
I am using Suse 11 in virtual enviroment using vmware.
For some reasons I need to add a new virtual nic or just a nic to my suse 11.
so is there a way to add this new NIC to my Suse 11 without restarting?
thanks a lot
---------- Post updated 01-24-13 at 01:22 AM ----------... (0 Replies)