r2test.conf(5) r2test.conf(5)
NAME
r2test.conf - OpenR2 r2test program configuration file
SYNOPSIS
/etc/openr2/r2test.conf
DESCRIPTION
This file defines the behavior of the r2test program
This file works pretty much like Asterisk zapata.conf file, the channel parameter will create a R2 context with the specified range of
channels and will take all the preceding parameters as configuration.
SYNTAX
No spaces are allowed in parameter definition, lines starting with # or spaces will be ignored
This definition will not be read properly
param = value
This definition will be read fine
param=value
OPTIONS
category=<NATIONAL_SUBSCRIBER, NATIONAL_PRIORITY_SUBSCRIBER, INTERNATIONAL_SUBSCRIBER, INTERNATIONAL_PRIORITY_SUBSCRIBER>
Defines the call category of subscriber. Defaults to NATIONAL_SUBSCRIBER
loglevel=<all,error,warning,debug,notice,cas,mf,stack,nothing>
Defines the log level for debugging purposes. Defaults to all
error, warning, debug, notice These options are self-descriptive
cas is for logging ABCD CAS tx and rx
mf is for logging of the Multi Frequency tones
stack is for very verbose output of the channel and context call stack, only useful if you are debugging a crash or want to learn
how the library works. The stack logging will be only enabled if the OpenR2 library was compiled with -DOR2_TRACE_STACKS
all is a special value to log all the activity
nothing is a clean-up value, in case you want to not log any activity for a channel or group of channels
You can mix up values, like: loglevel=error,debug,mf to log just error, debug and multi frequency messages
callfile=<yes|no>
Call files useful to debug signaling issues are dumped in the current directory if this parameter is enabled. Defaults to no
variant=<br,mx,ar,itu>
R2 country variant. Defaults to mx
maxani How much ANI to expect. Defaults to 10
maxdnis
How much DNIS to expect. Defaults to 4
getanifirst=<yes|no>
Whether or not we want to request ANI first. Defaults to no
usedahdimf=<yes|no>
Whether to use the built-in OpenR2 MF tone generation or DAHDI MF tone generation. DAHDI is faster since it does not require to copy
user space buffers to the kernel, however this option will only be available when the configure script detects DAHDI support for MF
R2 tone generation. Defaults to no
mfthreshold
MF threshold in milliseconds. This is the amount of time a R2 MF signal is required to be ON or OFF after has been detected to be
handled. 0 means as soon as we detect a signal we handle it. This aids when a buggy generator or detector causes small false posi-
tives. Defaults to 0
mfbacktimeout
MF backward timeout in milliseconds to use OpenR2 default just specify any negative number or comment this line. Defaults to -1
meteringpulsetimeout
Value in milliseconds for the metering pulse timeout, any negative value means default. Defaults to -1
collectcalls=<yes|no>
Whether to accept collect calls (see also doubleanswer). Defaults to no
doubleanswer=<yes|no>
This option are related but independent of collectcalls. If you have problems to block collect calls using Group B signals (collect-
calls), enable this option. Defaults to no
immediateaccept=<yes|no>
Whether to skip Group B/II signals and go directly to the accepted state for an incoming call. Defaults to no
advancedprotocolfile
This option is for advanced users only! Define a file that contains hacks to R2 protocol. This allow advanced users to fine tune the
library or make test with specific scenarios to include in the library in the future.
playaudio=<yes|no>
This feature allows you to play an alaw audio file for incoming/outgoing calls. Defaults to no
audiofile
If you set playaudio=yes you should provide the path to the audio file
channel
Define range of channels to configure using previous options. The channel range must be specified, unless you will use only one
channel. If this option is specified after dnid, cid and caller that options will be used. Defaults to
channel=1-15
channel=17-31
dnid Defines the destination number. Only used if .B caller = yes
cid Defines the caller id number. Only used if .B caller = yes
caller=<yes|no>
Whether or not the group of channels will start a call to the specified dnid. Defaults to yes
FILES
/etc/openr2/r2test.conf
/etc/openr2/r2proto.conf
SEE ALSO
r2test(8)
AUTHOR
This manual page was written by Alexandre Cavalcante Alencar
<alexandre.alencar@gmail.com>
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any
later version published by the Free Software Foundation.
Moises Silva 1.0.0 r2test.conf(5)