aepconf(5) File Formats Manual aepconf(5)
NAME
aepconf - aegis project configuration file
SYNOPSIS
project/baseline/aegis.conf (default)
project/baseline/config (obsolete)
DESCRIPTION
A project configuration file is used to store information about a project. This file is under source control, and is one of the project's
source files. Developers may thus modify this file as part of a change.
As of aegis.4.17, it is possible to assign any arbitrary name to the project configuration file or files. See aenf(1) for more informa-
tion.
This file contains a number of commands to be executed by Aegis. There are times when the substitutions in these commands may contain
shell special characters, which would change the meaning of the commands in unintended ways. There are two main sources of these prob-
lems: file names and architecture names. In order to have shell special characters in filenames, you must set the shell_safe_filenames
field (see below) to false. If you do this, you will need to use the quote substitution (see aesub(5)) to quote them, so that the shell
does not abuse them. Other things which may need quoting include architecture names if you get creative, and edit numbers if unusual ones
are generated by your history tool.
Getting Started
Because the project aegis.conf file is under source control like any other file, you must create the project aegis.conf file in the very
first change of your project. Use the
$ aenf aegis.conf
$
command and then editing the file to fill in the fields. Subsequent Aegis commands in that change will use that file. Once the change is
completed (see aeipass(1) for more information) the file will be present in the baseline, and be used by all users and all changes.
If you ever need to change one of the fields of the project aegis.conf file, you do this the same way as for any other source file, by
copying it into a change using the
$ aecp aegis.conf
$
command and then edit the file to make the desired changes. While it's being developed your change will use it's copy of the project
aegis.conf file, but once the change is completed (see aeipass(1) for more information), it becomes the new version used by all users and
changes.
If you would prefer a different name for the project configuration file, use the aenf -config option. For example, the
$ aenf -config project.configuration
$
command would create a file called project.configuration and Aegis would then proceed to use it to obtain project configuration informa-
tion for the duration of the project. This attribute will even be preserved across file renames (see the aemv(1) command).
CONTENTS
This file contains the following fields:
configuration_directory = string;
This field names a directory which will be searched for additional configuration files. (This directive is only legal or meaning-
ful in the master project aegis.conf file.)
All source files (change source files and project source files) present in this directory will be read in as if they were added to
the end of the project "aegis.conf" file.
The usual priority of files (development directory, branch baseline, etc, project trunk baseline) is observed when these files are
read.
Please note that the physical directories are never searched, only the Aegis concept of the change and project files is consulted
(i.e. files created and modified in the usual way with aenf(1) and aecp(1) commands). Placing additional files in the physical
directories will have no effect.
It is recommended that if you use this field at all, that your top level project aegis.conf file should only contain this one
field. This is to avoid overly-large re-reading of this file when it is joined to all the others.
build_command = string;
This field describes how to build the project (actually, how to do an integration build). This field is mandatory. Used by the
aeb(1) command. All of the substitutions described by aesub(5) are available.
Executed as: the integrator (for integration builds) or the developer (for development builds). Current directory: the integra-
tion directory of the change (for integration builds) the development directory of the change (for development builds). Exit sta-
tus: zero is considered success, non-zero is a failure and a subsequent successful (exit zero) build will be required.
If this field is set to "exit 0" then no integration build will be required, and will not be checked for by the aeipass(1) com-
mand.
development_build_command = string;
This field describes how to do a development build. If this field is absent, it defaults to the above. Used by the aeb(1) com-
mand. All of the substitutions described by aesub(5) are available.
Executed as: the developer. Current directory: the development directory of the change. Exit status: zero is considered success,
non-zero is a failure and a subsequent successful (exit zero) build will be required.
If this field is set to "exit 0" then no development build will be required, and will not be checked for by the aede(1) command.
development_directory_style = { ... };
This field encapsulates a set of parameters controlling the appearance of the development directory. It has significant implica-
tions for the way the DMT is used, and the directory appearance presented to the DMT.
source_file_link = boolean;
This field is true if hard links are to be used for project source files (which are not part of the change) so that the
work area has a complete set of source files.
Defaults to false if not set.
If the host system does not have hard links, this field will be ignored.
Maintaining the hard links can be time consuming for large projects, and add quite a noticeable delay before builds start
doing anything. If possible, change your build system to use the $search_path substitution instead and avoid links.
source_file_symlink = boolean;
This field is true if symbolic links are to be used for project source files (which are not part of the change) so that
the work area has a complete set of source files.
Defaults to false if not set. [If the obsolete create_symlinks_before_build field is set, defaults to the value of that
field, with a warning.]
If (source_file_link == true and hard links are available) this field will be ignored. If the host system does not have
symbolic links, this field will be ignored.
Maintaining the symbolic links can be time consuming for large projects, and add quite a noticeable delay before builds
start doing anything. If possible, change your build system to use the $search_path substitution instead and avoid sym-
bolic links.
source_file_copy = boolean;
This field is true if copies are to be used for project source files (which are not part of the change) so that the work
area has a complete set of source files. File modification time attributes will be preserved.
Defaults to false if not set.
If ((source_file_link == true and hard links are available) OR (source_file_symlink == true and symbolic links are avail-
able)) this field will be ignored.
Maintaining the copies can be time consuming (and space consuming) for large projects, and add quite a noticeable delay
before builds start doing anything. If possible, change your build system to use the $search_path substitution instead
and avoid file copies.
source_file_whiteout = boolean;
The source_file_whiteout field mat be used to specify the presence (true) or absence (false) of white-out files, used to
"cover up" files being removed by a change set. These files contain 1kB of random data, intended to cause a syntax error
should be build reference them.
It is rarely necessary to explicitly set this field. It defaults to false if you set any of the source_file_link,
source_file_symlink or source_file_copy to true; it defaults to true only if none of them are true.
Not meaningful (always false) for integration builds.
derived_file_link = boolean;
This field is true if hard links are to be used for non-source files which are present in the project baseline(s) but
which are not present in the work area, so that the work area has a complete set of derived files. This allows work areas
to take advantage of "precompiled" object files (etc) in the baseline(s).
Defaults to false if not set.
If the host system does not have hard links, this field will be ignored.
Maintaining the links can be time consuming for large projects, and add quite a noticeable delay before builds start doing
anything. If possible, change your build system to use the $search_path substitution instead and avoid hard links.
Alternatively, set derived_at_start_only = true; and your work area will get a "head start" but the derived files will not
be checked for every build, but this will occasionally result in long build times after integrations.
See also the integrate_begin_exceptions and symlink_exceptions fields (they apply to hard links as well as symbolic
links).
derived_file_symlink = boolean;
This field is true if symbolic links are to be used for non-source files which are present in the project baseline(s) but
which are not present in the work area, so that the work area has a complete set of derived files. This allows work areas
to take advantage of "precompiled" object files (etc) in the baseline(s).
Defaults to false if not set. [If the obsolete create_symlinks_before_build field is set, defaults to the value of that
field, with a warning.]
If (derived_file_link == true and hard links are available) this field will be ignored. If the host system does not have
symbolic links, this field will be ignored.
Maintaining the symbolic links can be time consuming for large projects, and add quite a noticeable delay before builds
start doing anything. If possible, change your build system to use the $search_path substitution instead and avoid sym-
bolic links. Alternatively, set derived_at_start_only = true; and your work area will get a "head start" but the derived
files will not be checked for every build, occasionally resulting in long build times after integrations.
See also the integrate_begin_exceptions and symlink_exceptions fields.
derived_file_copy = boolean;
This field is true if copies are to be used for non-source files which are present in the project baseline(s) but which
are not present in the work area, so that the work area has a complete set of derived files. This allows work areas to
take advantage of "precompiled" object files (etc) in the baseline(s).
Defaults to false if not set.
If ((derived_file_link == true and hard links are available) or (derived_file_symlink == true and symbolic links are
available)) this field will be ignored.
Maintaining the copies can be time consuming (and space consuming) for large projects, and add quite a noticeable delay
before builds start doing anything. If possible, change your build system to use the $search_path substitution instead
and avoid symbolic links. Alternatively, set derived_at_start_only = true; and your work area will get a "head start" but
the derived files will not be checked for every build, occasionally resulting in long build times after integrations.
See also the integrate_begin_exceptions and symlink_exceptions fields (they apply to copies as well as symbolic links).
during_build_only = boolean;
This field is set to true if you want the symbolic links, hard links and/or copies removed again after each build. This
allows the user to maintain the illusion of using a search path, without actually doing so. This option is not especially
efficient.
Defaults to false if not set. [If the obsolete remove_symlinks_after_build field is set, defaults to the value of that
field, with a warning.]
If this field is false, the development directory will be populated by the develop begin (aedb) command, and the integra-
tion directory will be populated by the integrate begin (aeib) command.
derived_at_start_only = boolean;
This field controls whether the above fields controlling the appearance of derived files are acted upon before every build
(false) or only when the work area is created (true).
Defaults to false if not set.
This field is ignored if the during_build_only field is true.
This field can be complex. Here are a few examples; but much, much more is possible. The first example will get you a develop-
ment directory very similar to one presented by CVS:
development_directory_style =
{
source_file_copy = true;
};
Note that this is hugely space inefficient, and can be quite slow. The second example will get you a development directory very
similar to one presented by Tom Lord's arch:
development_directory_style =
{
source_file_link = true;
source_file_symlink = true;
source_file_copy = true;
};
Ideally, however, you should use the $search_path substitution of the build_command field. This is because the view path scales
better than any other method. On the other hand, you need a DMT with an excellent view path implementation (and GNU make
doesn't).
integration_directory_style = { ... };
This field encapsulates a set of parameters controlling the appearance of the integration directory. It has significant implica-
tions for the way the DMT is used, and the directory appearance presented to the DMT.
Defaults to the value of the development_directory_style field if not set. Note that the obsolete create_symlinks_before_-
integration_build and remove_symlinks_after_integration_build fields affect this default (with a warning) but only if they are
explicitly set.
Note that the link_integration_directory field is still relevant. That field controls how the baseline is cloned to form the
integration directory. This field operates after that operation.
build_time_adjust_notify_command = string;
This command is run when Aegis adjusts the last-time-modified time-stamp on files in the integration directory. If the build tool
uses additional information to supplement file modification times, this command gives you the opportunity to re-sync the associ-
ated database.
Executed as: the project owner.
Current directory: the integration directory. This is what is about to be come the new baseline.
Exit status: NOT ignored. Note that a failure here puts the change in a partial state from which recovery may be difficult. Best
to define this command with a set+e so that errors are ignored at the command level.
build_covers_all_architectures = boolean;
This field is set to true if the build command, when executed on any architecture, results in all architectures being built. This
may be accomplished, for example, by using cross-compilation techniques, or Cook's ability to nominate hosts on which to execute
each build rule.
test_covers_all_architectures = boolean;
This field is set to true if the test command, when executed on any architecture, results in all architectures being tested. This
may be accomplished, for example, by using Cook's ability to nominate hosts on which to execute each test rule.
symlink_exceptions = [ string ];
This field is used to list filename patterns for which symbolic links must not be made between the development directory and the
baseline. These are usually state files for various tools. The patterns are matched against the whole filename; naming only the
last filename path element will not work (unless the pattern starts with "*").
change_file_command = string;
This field contains a command to be executed whenever a 'aegis -CoPy_file', 'aegis -New_File' 'aegis -New_Test' 'aegis -MoVe_file'
or 'aegis -ReMove_file' command is successful. See also command-specific overrides. If this field is absent, nothing is done.
Used by the aecp(1), aenv(1), aenf(1), aerm(1), and aemv(1) commands. All of the substitutions described by aesub(5) are avail-
able; in addition,
${File_List}
Space separated list of files named.
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
change_file_undo_command = string;
This field contains a command to be executed whenever a 'aegis -CoPy_file_Undo', 'aegis -MoVe_file_Undo' 'aegis -New_File_Undo',
'aegis -New_Test_Undo', or 'aegis -ReMove_file_Undo' command is successful. Default to change_file_command if absent. See also
command-specific overrides. If both fields are absent, nothing is done. Used by the aecpu(1), aemvu(1), aenfu(1), aentu(1) or
aermu(1), commands. All of the substitutions described by aesub(5) are available; in addition,
${File_List}
Space separated list of files named.
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
new_file_command = string;
Executed whenever the aegis -new_file command is run successfully. Defaults to `change_file_command' if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
new_test_command = string;
Executed whenever the aegis -new_test command is run successfully. Defaults to `change_file_command' if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
copy_file_command = string;
Executed whenever the aegis -copy_file command is run successfully. Defaults to `change_file_command' if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
remove_file_command = string;
Executed whenever the aegis -remove_file command is run successfully. Defaults to `change_file_command' if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
new_file_undo_command = string;
Executed whenever the aegis -new_file_undo command is run successfully. Defaults to change_file_undo_command if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
new_test_undo_command = string;
Executed whenever the aegis -new_test_undo command is run successfully. Defaults to change_file_undo_command if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer Current directory: the development directory of the change Exit status: ignored
copy_file_undo_command = string;
Executed whenever the aegis -copy_file_undo command is run successfully. Defaults to change_file_undo_command if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer Current directory: the development directory of the change Exit status: ignored
remove_file_undo_command = string;
Executed whenever the aegis -remove_file_undo command is run successfully. Defaults to change_file_undo_command if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer Current directory: the development directory of the change Exit status: ignored
make_transparent_command = string;
The make_transparent_command is executed whenever the aegis -make_transparent command is run successfully. Defaults to
change_file_command if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer Current directory: the development directory of the change Exit status: ignored
make_transparent_undo_command = string;
The make_transparent_undo_command is executed whenever the aegis -make_transparent_undo command is run successfully. Defaults to
change_file_undo_command if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_List}
Space separated list of files named (at times, can be empty).
Executed as: the developer Current directory: the development directory of the change Exit status: ignored
project_file_command = string;
This field contains a command to be executed during a development build before the development build command above, when (a) it is
the first build after a develop begin, or (b) some other change has been integrated into the baseline since the last build. If
this field is absent, nothing is done. Used by the aeb(1) command. All of the substitutions described by aesub(5) are available.
develop_begin_command = string;
This field contains a command to be executed whenever a 'aegis -Develop_Begin' command is successful. If this field is absent,
nothing is done. Used by the aedb(1) command. All of the substitutions described by aesub(5) are available.
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
develop_begin_undo_command = string;
This field contains a command to be executed whenever a 'aegis -Develop_Begin_Undo' command is successful. If this field is
absent, nothing is done. Used by the aedbu(1) command. All of the substitutions described by aesub(5) are available.
Executed as: the developer. Current directory: wherever the command was executed from. Exit status: ignored.
integrate_begin_command = string;
This field contains a command to be executed whenever a 'aegis -Integrate_Begin' command is successful. If this field is absent,
nothing is done. Used by the aeib(1) command. All of the substitutions described by aesub(5) are available.
Executed as: the project owner. Current directory: the integration directory. Exit status: ignored.
link_integration_directory = boolean;
This flag is true if Aegis should link the files from the baseline into the integration directory, rather than copy them (the
default). This has risks, as the build script (e.g. Howto.cook or Makefile, etc) must unlink targets before rebuilding them; if
this is not done the baseline will be corrupted. Used by the aeib(1) command.
integrate_begin_exceptions = [ string ];
This field may be used to specify a list of file names (and file name patterns) which are to be omitted from the copy (link) of
the baseline when creating the integration directory. Used by the aeib(1) command. This field only applies to derived files, it
does not apply to source files. The patterns are matched against the whole filename; naming only the last filename path element
will not work (unless the pattern starts with "*").
history_create_command = string;
This field is used to create a new history. The command is always executed as the project owner. Used by the aeipass(1) command.
It is strongly recommended that the history_create_command and history_put_command fields are identical. If not set, the
history_create_command field defaults to the same value as the history_put_command field.
All of the substitutions described by aesub(5) are available; in addition,
${Input}
Absolute path of the source file.
${History}
Absolute path of the history file. This may need to be reworked with the Dirname and Basename substitutions to yield a
string suitable for the history tool in question.
${File_Name}
The base relative file name of the file for this check-in. Note that the file name can vary over the lifetime of the file
as it is renamed, but the history file name (above) never varies. Do not use this as the name of the history file.
(Optional)
${UUID} The universally unique identifier of the source file. This is invariant for the lifetime of the file. Do not use use
this as the name of the history file. (Optional)
See also the history_put_trashes_file field, below.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: zero indicates success, all non-
zero exits indicate failure (the integrate pass will fail).
history_get_command = string;
This field is used to get a file from history. The command may be executed by developers. Used by the aeipass(1) and aecp(1)
commands. All of the substitutions described by aesub(5) are available; in addition,
${History}
The absolute path of the history file. This may need to be reworked with the Dirname and Basename substitutions to yield
a string suitable for the history tool in question.
${Edit}
The edit number to be extracted. It may be an arbitrary string, varying on the particular history tool.
${Output}
The absolute path of the destination file.
Executed as: the developer (or the executing user, in the case of the -independent option). Current directory: the base of the
history tree Exit status: zero indicates success, all non-zero exits indicate failure (the aecp will fail).
history_put_command = string;
This field is used to add a new change to the history. The command is always executed as the project owner. Used by the
aeipass(1) command.
It is strongly recommended that the history_put_command and history_create__command fields are identical. If not set, the
history_put_command field defaults to the same value as the history_create_command field.
All of the substitutions described by aesub(5) are available; in addition,
${Input}
The absolute path of the source file.
${History}
The absolute path of the history file. This may need to be reworked with the Dirname and Basename substitutions to yield
a string suitable for the history tool in question.
${File_Name}
The base relative file name of the file for this check-in. Note that the file name can vary over the lifetime of the file
as it is renamed, but the history file name (above) never varies. Do not use this as the name of the history file.
(Optional)
${UUID} The universally unique identifier of the source file. This is invariant for the lifetime of the file. Do not use use
this as the name of the history file. (Optional)
See also the history_put_trashes_file field, below.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: zero indicates success, all non-
zero exits indicate failure (the integrate pass will fail).
history_transaction_begin_command = string;
The history_transaction_begin_command field is used to specify a command to be run by aeipass(1) before any history create or his-
tory put commands are run. The default is to do nothing.
All of the substitutions described in aesub(5) are available. If you need a transaction ID, use the $version substitution.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: zero indicates success, all non-
zero exits indicate failure (the integrate pass will fail).
history_transaction_end_command = string;
The history_transaction_end_command field is used to specify a command to be run by aeipass(1) after any history create or history
put commands are run, but before any history query commands are run. The default is to do nothing.
All of the substitutions described in aesub(5) are available. If you need a transaction ID, use the $version substitution.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: zero indicates success, all non-
zero exits indicate failure (the integrate pass will fail).
history_transaction_abort_command = string;
The history_transaction_abort_command field is used to specify a command to be run by aeipass(1) to indicate that a transaction
has been abandoned. The default is to do nothing.
All of the substitutions described in aesub(5) are available. If you need a transaction ID, use the $version substitution.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: ignored (the integrate pass has
already failed).
history_query_command = string;
This field is used to query the topmost edit of a history file. Result to be printed on the standard output. This command may be
executed by developers. Used by the aeipass(1) and aecp(1) commands. All of the substitutions described by aesub(5) are avail-
able; in addition,
${History}
The absolute path of the history file. This may need to be reworked with the Dirname and Basename substitutions to yield
a string suitable for the history tool in question.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: zero indicates success, all non-
zero exits indicate failure (the integrate pass will fail).
history_label_command = string;
This field contains a command to be executed whenever a aeipass(1) or aedn(1) command is successful. This command is invoked for
every file in the project. So using it incurs a performance penalty. If this field is absent, nothing is done. All of the sub-
stitutions described by aesub(5) are available; in addition,
${History}
The absolute path of the history file.
${Edit}
The edit number to be labeled. It may be an arbitrary string, varying on the particular history tool.
${Label}
The label to be attached to the history. When executed from aeipass(1) this value is the same as ${Version}, which may
need to be reworked with the ${Subst} substitutions to yield a string suitable for the history tool in question. When
executed from aedn(1) it is set to the value passed in from the command line.
Executed as: the project owner. Current directory: the base of the history tree. Exit status: zero indicates success, all non-
zero exits indicate failure (a warning will be issued).
Labeling does not scale, so the use of this command is not encouraged. If you have a project with 10,000 files, and a change mod-
ified exactly one of them, only one history_put_command execution is required, which operates on one history file. If you have
labeling turned on, it will also be necessary to execute 10,000 history_label_commands, to add information Aegis will never use.
history_put_trashes_file = (fatal, warn, ignore);
Many history tools (e.g. RCS) can modify the contents of the file when it is committed. While there are usually options to turn
this off, they are seldom used. The problem is: if the commit changes the file, the source in the repository now no longer
matches the object file in the repository - i.e. the history tool has compromised the referential integrity of the repository.
fatal
Emit a fatal error if one or more source files are modified by a history_put_command or history_create_command. This is the
default.
warn
Emit a warning if a source file is modified.
ignore
Ignore a source file changing. You sure better hope it was only in a comment!
history_content_limitation = (ascii_text, international_text, binary_capable);
This field describes the content style which the history tool is capable of working with.
ascii_text
The history tool can only cope with files which contain printable ASCII characters, plus space, tab and newline. The file
must end with a newline. This is the default.
international_text
The history tool can only cope with files which do not contain the NUL character. The file must end with a newline.
binary_capable
The history tool can cope with all files without any limitation on the form of the contents.
When a file is added to the history (by either the history_create_command or the history_put_command field) it is examined for
conformance to this limitation. If there is a problem, the file is encoded in either quoted printable for MIME64, whichever is
smaller, before being given to the history tool. This encoding is transparent, the file in the baseline is unchanged.
On extract (the history_get_command field) the encoding is reversed, using information attached to the change file information.
This is because each put could use a different encoding (although in practice, file contents rarely change that dramatically, and
the same encoding is likely to be deduced every time).
Please note that this field does not apply to the diff_command or merge_command fields.
diff_command = string;
This field is used to difference of 2 files. The command is always executed by developers. Used by the aed(1) command. All of
the substitutions described by aesub(5) are available; in addition,
${ORiginal}
The absolute path of the original file copied into the change. Usually in the baseline, but not always.
${Input}
The absolute path of the file in the development directory.
${Output}
The absolute path of the file in which to write the difference listing.
Executed as: the project owner (for integration diffs), or the developer (for development diffs). Current directory: the integra-
tion directory (for integration diffs), or the development directory (for development diffs). Exit status: zero indicates suc-
cess, all non-zero exits indicate failure (the aed will fail).
Note: It is possible to configure a project to omit the diff step as unnecessary, by the following setting:
diff_command = "exit 0";
This disables all generation, checking and validation of difference file for each change source file. The merge functions of the
aediff(1) command are unaffected by this setting.
merge_command = string;
This field is used to merge two competing edits to a file. The command is always executed by developers. The current directory
will be the development directory. This field is used by the aed(1) command. All of the substitutions described by aesub(5) are
available; in addition,
${ORiginal}
The absolute path of the original file copied into the change. Usually not in the baseline, often a temporary file.
${Most_Recent}
The absolute path of the competing edit, usually in the baseline.
${Input}
The absolute path of the file in the development directory. This is the "preferred" edit, if the tool has this concept
when highlighting conflicting edits.
${Output}
The absolute path of the file in which to write the merged result. This will usually be the name if a change source file
in the development directory.
It is important that this command does not move files around. (See the obsolete diff3_command field, below, for some history.)
Executed as: the project owner (for integration diffs), or the developer (for development diffs). Current directory: the integra-
tion directory (for integration diffs), or the development directory (for development diffs). Exit status: zero indicates suc-
cess, all non-zero exits indicate failure (the aed will fail).
patch_diff_command = string;
The difference of 2 files, to send around as a patch. (This isn't the same as diff_command, because it's aimed at GNU Patch, not
at humans.) The command is always executed by developers. Used by the aepatch(1) command.
Defaults to "set +e; diff -c -L $index -L $index $original $input > $output; test $? -le 1" if not set.
All of the substitutions described by aesub(5) are available; in addition,
${ORiginal}
The absolute path of the original file copied into the change. Usually in the baseline, but not always.
${Input}
The absolute path of the file in the development directory.
${Output}
The absolute path of the file in which to write the difference listing.
${INDex}
The project-relative name of the file, for use when the file name is embedded in the output. (Optional.)
Executed as: the project owner (for integration diffs), or the developer (for development diffs). Current directory: the integra-
tion directory (for integration diffs), or the development directory (for development diffs). Exit status: zero indicates suc-
cess, all non-zero exits indicate failure (the aed will fail).
annotate_diff_command = string;
The difference of 2 files, for the use of the aeannotate(1) command. (This isn't the same as the diff_command field, because it's
aimed at aeannotate(1), not at humans.) The command is always executed by developers. Used by the aeannotate(1) command.
Extreme care should be taken if you are considering setting this field, otherwise the result reported by aeannotate(1) may bear
little relation to reality. The most useful option is GNU diff's --ignore-all-space option, which will have the effect of ignor-
ing the majority of indenting and code formatting changes. The --ignore-case option could also be useful for case insensitive
languages such as FORTRAN or PL/1. Avoid options which would alter the number of lines, such as - -ignore-blank-lines or --con-
text as these will produce misleading results.
Defaults to "set +e; diff $option $original $input > $output; test $? -le 1" if not set.
All of the substitutions described by aesub(5) are available; in addition,
${ORiginal}
The absolute path of the original file copied into the change. Usually in the baseline, but not always.
${Input}
The absolute path of the file in the development directory.
${Output}
The absolute path of the file in which to write the difference listing.
${INDex}
The project-relative name of the file, for use when the file name is embedded in the output. (Optional.)
${OPTion}
Extra options to be passed to the diff command, as set by the aeannotate(1) -diff-option command line option. Use with
extreme care.
Executed as: the project owner (for integration diffs), or the developer (for development diffs). Current directory: the integra-
tion directory (for integration diffs), or the development directory (for development diffs). Exit status: zero indicates suc-
cess, all non-zero exits indicate failure (the aed will fail).
review_policy_command = string;
This field is used to set the command to be executed by the aerpass(1) command. This command is useful in cases where the enter-
prise has determined that more than one review is necessary or that the reviewer must be senior to the developer, etc. Defaults
to "exit 0" if not set.
The exit status is examined. An zero exit status (success) means that the change will proceed to the awaiting integration state;
a non-zero exit status (failure) means that the change requires further review state, and the develop_end_action is consulted to
determine the appropriate state (awaiting_review or being_reviewed) for the change to move to.
All of the substitutions described by aesub(5) are available. Of particular interest are ${Change_Developer_List} and
${Change_Reviewer_List} for passing the specific staff involved with the change.
Executed as: the current reviewer. Current directory: the development directory. Exit status: zero indicates success, non-zero
indicates failure.
For example, to have a script which is a project source file to be used to gate the code review process, a setting such as the
following may be used:
review_policy_command =
"$sh ${source script/reviewpolicy.sh} "
"-p $project -c $change "
"-d ${developer_list} "
"-r ${reviewer_list}"
;
This is only one of many ways to implement a project specific review policy.
develop_end_policy_command = string;
This field is used to set the command to be executed by the aede(1) command. This command is useful in cases where the enterprise
has determined that additional pre-conditions must be met (in addition to those already imposed by the aede(1) command) before a
change may leave the being developed state. Defaults to "exit 0" if not set.
The exit status is examined. An zero exit status (success) means that the change may leave to the being developed state; a non-
zero exit status (failure) means that the change requires further development.
All of the substitutions described by aesub(5) are available.
Executed as: the developer. Current directory: the development directory. Exit status: zero indicates success, non-zero indi-
cates failure.
There are some common validations available in the aede-policy(1) command; you may choose all or only some of them, or you may
choose to write a policy command specific to your project.
unchanged_file_develop_end_policy = (...);
This field may be used to control what happens when development of a change is ended, and the change contains files which have not
had their contents or their attributes changed.
ignore Does not look for or warn about unchanged files. This the default.
warning If the change sets contains unchanged files, a warning will be issued for each one.
error If the change set contains unchanged files, an error will be issued for each one, and develop end will not complete (the
change will remain in the being developed state).
unchanged_file_integrate_pass_policy = (...);
This field may be used to control what happens when a change is completed, and the change contains files which have not had their
contents or their attributes changed.
ignore Does not look for or warn about unchanged files. The file version will be added to the history. This the default.
warning If the change sets contains unchanged files, a warning will be issued for each one. The file version will be added to the
history.
remove If the change set contains an unchanged file, it will be silently removed from the change set. The file version will not
be added to the history. The project file is unaffected.
test_command = string;
This field is used to set the command to be executed by the aet(1) command. Defaults to "$shell $file_name" if not set.
All of the substitutions described in aesub(5) are available. In addition:
${File_Name}
The absolute path of the test to be executed.
${Search_Path}
Colon separated list of directories to search for tests and test support files. (This is a normal aesub(5) substitution.)
${Search_Path_Executable}
Colon separated list of directories to search for executable files and executable support files. Usually it is the same
as the above, except during an "aet -bl" command.
${VARiables}
The text of name=value variable settings from the command line, suitably quoted to protect special character from the
shell. Will be appended to the end of the command if not used explicitly.
Note that tests are source files, and thus never have the execute bit set.
Executed as: the project owner (for integration tests) or the developer (for development tests), or the executing user (for -inde-
pendent tests). Current directory: the integration directory (for integration tests), the development directory (for development
tests), the project baseline (for -bl tests), or the current directory (for -independent tests). Exit status: zero indicates suc-
cess, one indicates failure, anything else indicates "no result".
development_test_command = string;
This field is used to set the command to be executed by the aet(1) command when a change is in the being developed state.
Defaults to be the same as the test_command field if not set.
Note: It is a significantly bad idea to make tests behave differently in being development and being integrated states; avoid this
at all costs.
All of the substitutions described in aesub(5) are available. In addition:
${File_Name}
The absolute path of the test to be executed.
${File_Name}
The absolute path of the test to be executed.
${Search_Path}
Colon separated list of directories to search for tests and test support files. (This is a normal aesub(5) substitution.)
${Search_Path_Executable}
Colon separated list of directories to search for executable files and executable support files. Usually it is the same
as the above, except during an "aet -bl" command.
${VARiables}
The text of name=value variable settings from the command line, suitably quoted to protect special character from the
shell. Will be appended to the end of the command if not used explicitly.
Note that tests are source files, and thus never have the execute bit set.
Executed as: the developer. Current directory: the development directory (for development tests), the project baseline (for -bl
tests). Exit status: zero indicates success, one indicates failure, anything else indicates "no result".
batch_test_command = string;
This field is used to set the command to be executed by the aet(1) command, in preference to the test_command or develop-
ment_test_command, if set. It is capable of running more than one test at once.
All of the substitutions described in aesub(5) are available. In addition:
${Output}
This is the name of the file to be generated to hold the test results. See aetest(5) for the format of this file.
A space separated list of absolute paths of the tests to be executed.
${File_Names}
The absolute path of the tests to be executed.
${File_Name}
The absolute path of the test to be executed.
${Search_Path}
Colon separated list of directories to search for tests and test support files. (This is a normal aesub(5) substitution.)
${Search_Path_Executable}
Colon separated list of directories to search for executable files and executable support files. Usually it is the same
as the above, except during an "aet -bl" command.
${Current}
Number of first test in the batch.
${Total}
Total number of tests. If this is 0 then no progress messages should be issued.
${VARiables}
The text of name=value variable settings from the command line, suitably quoted to protect special character from the
shell. Will be appended to the end of the command if not used explicitly.
Note that tests are source files, and thus never have the execute bit set.
It is strongly recommended that you design your test scripts so that they may be executed by either batch or non-batch methods.
This permits simple migration when your environment changes.
Executed as: the project owner (for integration tests) or the developer (for development tests), or the executing user (for -inde-
pendent tests). Current directory: the integration directory (for integration tests), the development directory (for development
tests), the project baseline (for -bl tests), or the current directory (for -independent tests). Exit status: zero indicates suc-
cess, one indicates failure, anything else indicates "no result".
architecture_discriminator_command = string;
If this field is present it is used as a command to be executed in order to further identify the platform architecture (see
below). All of the substitutions described by aesub(5) are available;
Executed as: the developer. Current directory: the development directory of the change. Exit status: zero indicates success, all
non-zero exits indicate failure.
architecture = [{ ... }];
This field is a list of system and machine architectures on which each change must successfully build and test. May be assigned
more than once. The structures listed have fields as follows:
name = string;
The name of the architecture. This name is available in the ${ARCHitecture} substitution (see aesub(5) for more informa-
tion), as well as being used internally by Aegis. You may use almost any name for your architecture, but it is best to
avoid shell special characters and white space, because it may be substituted into commands to be executed by Aegis.
pattern = string;
The system and machine architecture are determined by using the uname(2) system call. The uname(2) return value is assem-
bled into a string of the form "sysname-release-version-machine", or "sysname-release-version-machine-disc" if architec-
ture_discriminator_command is used.
The pattern field must match this uname result string. The first match found is used. The pattern is a shell file name
pattern, see sh(1) for more information.
For example, the pattern SunOS-4.1*-*-sun4* matches a machine the author commonly uses, which returns SunOS-4.1.3-8-sun4m
from the uname(2) system call.
mode = (required, optional, forbidden);
The mode field is used to control how the architecture information is used.
required
Architectures of thus mode will be copied into changes as their required architectures when the change is created.
This is the default.
optional
Architectures of thus mode will not be copied into changes as their required architectures when the change is cre-
ated. However, if you add them subsequently, they become required for that change.
forbidden
Aegis will refuse to build or test on architectures of this mode.
When a change is created, the required architecture names are copied into the change's architecture list. Once names are
in this list, they are required for the change, and the project attributes are less relevant.
If the architecture field is not set, it defaults to
architecture =
[
{
name = "unspecified";
pattern = "*";
mode = required;
}
];
file_template = [ { ... } ];
The file template is consulted whenever a new file is created, by one of the aenf(1) or aent(1) commands. May be assigned more
than once. Each list item has the form:
pattern = [ string ];
The name of the file, relative to the development directory. Each string is a shell file name pattern; see sh(1) for more
information. The patterns are matched against the whole filename; naming only the last filename path element will not
work (unless the pattern starts with "*").
body_command = string;
Command to run to initialize the body of the file.
Executed as: the developer. Current directory: the development directory of the change. Exit status: ignored.
body = string;
What to initialize the body of the file to.
All of the substitutions described in aesub(5) are available for the body and body_command strings. (Only specify one of them.)
In addition:
${File_Name}
will be replaced by the name of the new file.
whiteout_template = [ { ... } ];
The file template is consulted whenever a file is removed, by one of the aerm(1) or aemv(1) commands. It is used to place a
"whiteout" entry in the development directory, in order to induce compile errors of the removed file is referenced during the
build. Each list item has the form:
pattern = [ string ];
The name of the file, relative to the development directory. Each string is a shell file name pattern; see sh(1) for more
information. The patterns are matched against the whole filename; naming only the last filename path element will not
work (unless the pattern starts with "*").
body = string;
What to initialize the body of the file to. If not present, no whiteout file will be created; if the empty string, a
zero-length whiteout file will be created.
All of the substitutions described in aesub(5) are available for the body string. In addition:
${File_Name}
will be replaced by the name of the removed file.
If the name of the file being removed does not match any of the filename patterns, a file consisting of 1KB of very ugly garbage
will be generated. The idea is that it will produce a syntax error for most languages if you try to run it, compile it, or
include it.
maximum_filename_length = integer;
This field is used to limit the length of file names. All new files may not have path components longer than this. Existing
files are not affected. The last component must also allow for the ",D" suffix of difference files. Where this value is larger
than the file system allows, the file system limit will be imposed. Defaults to 255 if not set. Legal values range from 9 to
255.
The file name lengths of project files will be checked at develop end if the project aegis.conf file is in the change. See aede
(1) for more information.
posix_filename_charset = boolean;
This field may be used to limit the characters allowed in file names to only those explicitly allowed by POSIX. Defaults to false
if not set.
For a filename to be portable across conforming implementations of IEEE Std 1003.1-1988, it shall consist only of alphanumeric
characters, dot, hyphen or underscore. Hyphen shall not be used as the first character of a portable filename.
If this field is false, all characters are allowed except non-printing characters, space characters and leading hyphens.
dos_filename_required = boolean;
This field may be used to limit file names so that they conform to the DOS 8+3 filename limits and to the DOS filename character
set. Also denies file names which look like devices (AUX, etc). Defaults to false if not set. This field is used in combination
with the other filename fields, it does not replace them.
windows_filename_required = boolean;
This field may be used to limit file names so that they conform to the Windows98 and WindowsNT filename limits and character set.
Also denies file names which look like devices (AUX, etc). Defaults to false if not set. This field is used in combination with
the other filename fields, it does not replace them.
shell_safe_filenames = boolean;
This field may be used to limit file names so that they may not contain shell special characters. If you do not set this to true,
you will need to use the ${quote} substitution around file names in commands, or risk unexpected errors.
This field defaults to true if not set.
The white space characters (space, tab, newline, etc) are considered shell special characters.
allow_white_space_in_filenames = boolean;
This field may be used to allow white space characters in file names. This will allow the following characters to appear in file-
names: backspace (BS, , 0x08), horizontal tab (HT, , 0x09), new line (NL,
, 0x0A), vertical tab (VT, v, 0x0B), form feed
(FF, f, 0x0C), and carriage return (CR,
, 0x0D).
Defaults to false if not set.
Note that this field does not override other file name filters. It will be necessary to explicitly set shell_safe_filenames =
false as well. It will be necessary to set dos_filename_required = false (the default) as well. It will be necessary to set
posix_filename_charset = false (the default) as well.
The user must take great care to use the ${quote} substitution around all file names in commands in the project configuration.
And even then, substitutions which expect a space separated list of file names will have undefined results.
allow_non_ascii_filenames = boolean;
This field may be used to allow file names with non-ascii-printable characters in them. Usually this would mean a UTF8 or inter-
national charset of some kind.
Defaults to false if not set.
Note that this field does not override other file name filters. It will be necessary to explicitly set shell_safe_filenames =
false as well. It will be necessary to set dos_filename_required = false (the default) as well. It will be necessary to set
posix_filename_charset = false (the default) as well.
filename_pattern_accept = [ string ];
This field is used to specify a list of patterns of acceptable file names. The patterns are matched against each filename path
element. The patterns are constructed from the usual shell filename wild-cards. Defaults to "*" if not set.
filename_pattern_reject = [ string ];
This field is used to specify a list of patterns of unacceptable file names. The patterns are matched against each filename path
element. The patterns are constructed from the usual shell filename wild-cards. Defaults to "*,D" if not set. The pattern "*,D"
is always appended. Where the filename_pattern_accept and filename_pattern_reject fields conflict, the reject takes precedence.
new_test_filename = string;
This field is used to form the filename of new tests, where the filename is not specified on the aent command line. Defaults to
"test/${zpad $hundred 2}/t${zpad $number 4}${left $type 1}.sh" if not set.
All of the substitutions defined in aesub(5) are available. The following three substitutions are also available:
$Hundred
The test number divided by 100, optional
$Number The test number, mandatory
$Type The test type: "automatic" or "manual", optional
development_directory_template = string;
This field is used to determine the name of the development directory at develop begin. All of the substitutions defined in
aesub(5) are available. The following substitutions is also available:
Default_Development_Directory
The directory within which the development directory is to be created.
Magic A single letter, starting from "C", which can be inserted. This must be used, as it allows Aegis to try different names
should there be a conflict.
If not set, defaults to "$ddd/${left $p ${expr ${namemax $ddd} - ${length .$magic$c}}}.$magic$c".
For DOS compatibility (8+3 file names), a useful setting is "$ddd/${downcase ${left ${id $p} 8}.$magic${right 0$c 2}}". This
ensures that the filename is always a valid 8.3 filename, that it is always lowercase, and it translates any punctuation in the
project name into underscores.
metrics_filename_pattern = string;
This field is used to form the name of the metrics file, given a source file. All of the substitutions defined in aesub(5) are
available. The following substitutions is also available:
File_Name
The absolute path name of the source file.
Defaults to "$filename,S" if not set.
trojan_horse_suspect = [ string ];
This list of filename patterns is consulted by aedist --receive when it is checking for files which could be used to host Trojan
horse attacks. This will be different for different projects, so you will need to update this yourself. The patterns are matched
against the whole filename; naming only the last filename path element will not work (unless the pattern starts with "*").
project_specific = [ { ... } ];
This is a list of name and value pairs for use within the ${project-specific} substitution (see aesub(5) for more information).
May be assigned more than once. The sub-fields are
name = string;
The name of the value. By convention, names which start with an upper-case letter will appear in listings, and lower-case
will not. Attribute names are case-insensitive.
value = string;
The value to be substituted.
There are almost no limitations on the strings which may appear in either of these fields.
There are several attribute names which are known to and used by Aegis, these include:
aede-policy
This attribute is used when no policy names are listed on the aede-policy(1) command line.
aetar:exclude
This attribute is used by he aetar(1) receive command to exclude files in tarballs from consideration. This is a space
separated list of file names.
html:meta
This attribute is used by the aeget(1) command to customize generated web pages. See aeget(1) for more information.
html:body-begin
This attribute is used by the aeget(1) command to customize generated web pages. See aeget(1) for more information.
html:body-end
This attribute is used by the aeget(1) command to customize generated web pages. See aeget(1) for more information.
copyright-owner
This string is available via the ${copyright-owner} substitution, and is the one checked by the aede-policy(1) command.
Only set this attribute if your project is a work-for-hire under copyright law. It defaults to the value of ${user name}
if not set, this is almost always correct for Open Source projects.
When commands are executed by Aegis, it ensures that the AEGIS_PROJECT, AEGIS_CHANGE, AEGIS_ARCH, LINES and COLS environment vari-
ables are set appropriately. The project configuration file's project_specific field is also consulted, looking for value's whose
name starts with "setenv:" and sets the corresponding environment variable. All of the substitutions described by aesub(5) are
available. For example: specifying a PATH and a SEARCH_PATH to be used for all commands may be set as follows:
project_specific =
[
{
name = "setenv:PATH";
value = "/usr/bin:/bin";
},
{
name = "setenv:SEARCH_PATH";
value = "${search_path}";
},
];
As many environment variables as desired may be specified in this way.
build_time_adjust = (...);
This field controls the adjustment of file modification times at the end of integrate-pass. File times are adjusted so that
development directories are, in the main, out of date with respect to the baseline. The idea is that, at the very least, programs
need to be re-linked so that aet -reg does not give false negatives.
Combining this with the project_file_command (above) can alleviate the vast majority of file modification time inconsistencies
experienced as a result of a project integration and the subsequent changes in the baseline's file modification times.
Unless you are a masochist, do not set this field. Leave it as the default.
adjust_and_sleep
Causes the file times to be adjusted, and if the file times would extend into the future, aeipass will sleep until that
time has passed. This is the default.
adjust_only
Causes the file times to be adjusted. If the file time extend into the future, a warning is issued.
dont_adjust
File modification times are not adjusted. This is a really bad idea. Really. Make sure that, at the very minimum,
project_file_command touches all of the change's files, otherwise the build problems which ensue are going to take you
weeks to track down and lose you much productivity. You have been warned.
See also the build_time_adjust_notify_command field.
signed_off_by = boolean;
If this field is set each aedb(1), aechown(1), aede(1) and aerpass(1) will append a Signed-off-by line to the change description.
This field should only be set to true for open source projects.
For a description of Signed-off-by see http://www.ussg.iu.edu/hypermail/linux/kernel/0405.2/1301.html and
http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html
cache_project_file_list_for_each_delta = boolean;
It is possible to have Aegis cache the list of project files that were present at integrate pass for each delta (integrated change
set). This is used to optimize all project-history-based operations, such as aecp -delta or aepatch(1).
This cache will optimize many operations which would otherwise require time to reconstruct the project state using the roll-for-
ward data available in each change set. However, it comes at the cost of disk space, and not everyone can afford more and more
disk.
This field defaults to true if not set.
clean_exceptions = [ string ];
It is possible to have Aegis exclude from the clean process any file that match one of the pattern listed in the clean_exceptions
list.
This field default to an empty list if not set.
cache_project_file_list_for_each_delta = boolean;
It is possible to have Aegis cache the list of project files that were present at integrate pass for each delta (integrated change
set). This is used to optimize all project-history-based operations, such as aecp -delta or aepatch(1).
This cache will optimize many operations which would otherwise require time to reconstruct the project state using the roll-for-
ward data available in each change set. However, it comes at the cost of disk space, and not everyone can afford more and more
disk.
This field defaults to true if not set.
RSS FEEDS
Aegis has the ability to feed RSS channels when change sets transition states. See the User Guide for full details. Following is a brief
description of the project-specific attributes used to control this process.
Create / Add to a channel
An RSS channel is specified with the rss:feedfilename project_specific attribute:
project_specific =
[
{
name = "rss:feedfilename-<filename>";
value = "<space-separated list of states>";
}
]
Specify the Description of an RSS channel
The description of an RSS channel is specified with the rss:feeddescription project_specific attribute:
project_specific =
[
{
name = "rss:feeddescription-<filename>";
value = "<description>";
}
]
Specify the Title of an RSS channel
The title of an RSS channel is specified with the rss:feedtitle project_specific attribute:
project_specific =
[
{
name = "rss:feedtitle-<filename>";
value = "<title>";
}
]
Specify the Language of an RSS channel
The language of an RSS channel is specified with the rss:feedlanguage project_specific attribute:
project_specific =
[
{
name = "rss:feedlanguage-<filename>";
value = "<language";
}
]
OBSOLETE FIELDS
There are some obsolete fields in the file. They are provided for backwards compatibility only, and should not be used.
diff3_command = string;
This field is used to difference 3 files. The command is always executed by developers. Used by the aed(1) command. All of the
substitutions described by aesub(5) are available; in addition,
${ORiginal}
The absolute path of the original file copied into the change. Usually not in the baseline.
${Most_Recent}
The absolute path of the competing edit, usually in the baseline.
${Input}
The absolute path of the file in the development directory.
${Output}
The absolute path of the file in which to write the difference listing.
Executed as: the project owner (for integration diffs), or the developer (for development diffs). Current directory: the integra-
tion directory (for integration diffs), or the development directory (for development diffs). Exit status: zero indicates suc-
cess, all non-zero exits indicate failure (the aed will fail).
The problem with this field was that the default usage placed the merged source in a strange place. And subsequent aed(1) com-
mands would over-write it. This meant that merges would be lost, causing a number of nasty problems. Some sites overcame this by
adding "mv" commands to put the output back where the input came from, but this meant that Aegis' commentary was misleading. Use
the "merge_command" field instead. It is almost identical, but Aegis will move the files around for you - so you get the good
behavior by default (no lost merges) and the error message is consistent.
create_symlinks_before_build = boolean;
This flag is true if Aegis should create symlinks from the development directory to the baseline for all files in the baseline not
in the development directory immediately before a development_build_command is issued. Usually used to trick dumb DMTs into
believing the development directory contains an entire copy of the project, though sometimes the DMT is smart enough, the tools it
must work with are not. Symlinks in the development directory which point to nonexistent files will be removed.
Defaults to false if not set.
create_symlinks_before_integration_build = boolean;
This flag is true if Aegis should create symlinks from the integration directory to the ancestral baseline for all files in the
ancestral not in the integration directory immediately before a build_command is issued. Usually used to trick dumb DMTs into
believing the integration directory contains an entire copy of the project, though sometimes the DMT is smart enough, the tools it
must work with are not. Symlinks in the integration directory which point to nonexistent files will be removed.
Defaults to the same value as create_symlinks_before_build if not set.
remove_symlinks_after_build = boolean;
This flag is true if Aegis should remove symlinks which point from the development directory to the baseline directory immediately
after a development_build_command is issued. Only consulted if the create_symlinks_before_build field is true, for the purpose of
reversing the actions of the create_symlinks_before_build field.
Defaults to false if not set.
remove_symlinks_after_integration_build = boolean;
This flag is true if Aegis should remove symlinks which point from the integration directory to the ancestral baseline directory
immediately after a build_command is issued. Only consulted if the create_symlinks_before_integration_build field is true, for
the purpose of reversing the actions of the create_symlinks_before_integration_build field.
Defaults to true if not set. This default is intentional. It is important that there are no symlinks in the (new) baseline,
because they could go stale between integrations. If you set this field to false, caveat emptor.
SEE ALSO
aeb(1) build a change
aecp(1) copy a file into a change
aecpu(1)
reverse action of aecp
aed(1) find differences between a change and the baseline
aede(1) end development of a change aede-policy(1) check things about a change
aerpass(1)
pass a review of a change
aeib(1) begin integration of a change
aeipass(1)
pass integration of a change
aemv(1) rename a file as part of a change
aenf(1) add new files to be created by a change
aenfu(1)
remove new files from a change
aent(1) add a new test to be created by a change
aentu(1)
remove new tests from a change
aet(1) run tests
aegis(5)
aegis file format syntax
aesub(5)
available command substitutions
aetest(5)
batch test results file
COPYRIGHT
aegis version 4.24.3.D001
Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter
Miller
The aegis program comes with ABSOLUTELY NO WARRANTY; for details use the 'aegis -VERSion License' command. This is free software and you
are welcome to redistribute it under certain conditions; for details use the 'aegis -VERSion License' command.
AUTHOR
Peter Miller E-Mail: millerp@canb.auug.org.au
//* WWW: http://www.canb.auug.org.au/~millerp/
Reference Manual Aegis aepconf(5)