NVRAM(4) BSD Kernel Interfaces Manual NVRAM(4)NAME
nvram -- non-volatile RAM
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device nvram
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
nvram_load="YES"
DESCRIPTION
The nvram driver provides access to BIOS configuration NVRAM on i386 and amd64 systems.
PC motherboard uses a small non-volatile memory to store BIOS settings which is usually part of its clock chip and sometimes referred as
``CMOS SRAM''. This driver exposes bytes 14 through 128 of the NVRAM, or a total of 114 bytes, at offset zero of the device file /dev/nvram.
This driver is useful for cloning machines that shares the same hardware configuration and need same BIOS setting tweaks.
IMPLEMENTATION NOTES
The BIOS NVRAM's bytes 16 through 31 are checksummed at byte 32. This driver does not take care for these checksums.
EXAMPLES
Backup existing BIOS NVRAM to nvram.bin:
dd if=/dev/nvram of=nvram.bin
Restore BIOS NVRAM from nvram.bin:
dd if=nvram.bin of=/dev/nvram
SEE ALSO dd(1)HISTORY
The nvram device driver first appeared in FreeBSD 6.4.
AUTHORS
The nvram device driver was written by Peter Wemm. This manual page was written by Xin LI.
BSD February 8, 2010 BSD
Check Out this Related Man Page
NVRAM(4) BSD Kernel Interfaces Manual NVRAM(4)NAME
nvram -- non-volatile RAM
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device nvram
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
nvram_load="YES"
DESCRIPTION
The nvram driver provides access to BIOS configuration NVRAM on i386 and amd64 systems.
PC motherboard uses a small non-volatile memory to store BIOS settings which is usually part of its clock chip and sometimes referred as
``CMOS SRAM''. This driver exposes bytes 14 through 128 of the NVRAM, or a total of 114 bytes, at offset zero of the device file /dev/nvram.
This driver is useful for cloning machines that shares the same hardware configuration and need same BIOS setting tweaks.
IMPLEMENTATION NOTES
The BIOS NVRAM's bytes 16 through 31 are checksummed at byte 32. This driver does not take care for these checksums.
EXAMPLES
Backup existing BIOS NVRAM to nvram.bin:
dd if=/dev/nvram of=nvram.bin
Restore BIOS NVRAM from nvram.bin:
dd if=nvram.bin of=/dev/nvram
SEE ALSO dd(1)HISTORY
The nvram device driver first appeared in FreeBSD 6.4.
AUTHORS
The nvram device driver was written by Peter Wemm. This manual page was written by Xin LI.
BSD February 8, 2010 BSD
Hello guys ,and girls.
Im having a very interesting problem.
I have a Netra SUN machine
and i had it here for quite a while now...i wanted to install it as a new server and todo so i needed to mount a cd rom and to change the boot at the prom level to cdrom.
this could work but i forgot the... (5 Replies)
I recently decided to install FreeBSD on an old 486 PC. I downloaded the iso and burnt it on my other computer. After that I went into the BIOS on the 486 to set the CD as my primary boot device.. but strangely there's no such option :confused:
And when i boot the machine the floppy drive makes... (2 Replies)
Does anyone know a good driver site. If you've heard of driverguide.com or driversearch.com please do not reccomend them because I already know them. I need to know where to get Motherboard drivers for a homemade computer. If there is any info that you need to know feel free to make a reply.
:) (5 Replies)
I have Ultra1 SUN machine, its NVRAM got damaged.
I purchased new NVRAM. now the host id of the new nvram is by default different than the old one.Any way to program it to change the new host id to be the same like the host id of the damaged one? (3 Replies)
Hello Guys,
and good day to everybody.
I am battling to redirect console on this V20Z 'beast', and would really like to know if it's possible to 'see' CMOS settings from Solaris10 point of view.
Machine is remote and I can't easily go and reboot the box and press F2 etc...
So is there a... (3 Replies)
I have replaced the nvram on my Sun V480 and now the system stops at the "ctrl-d for normal startup, or root password for maintenance" part. The nvram auto-boot=true, but it still stops here.
Any help would be appreciated.
Thanks. (4 Replies)
Hi, can anyone please answer my question in deleting the rest of the line. I have an example below of a file contaning:
Serial3/1.5 43.70.195.13 YES NVRAM down down
Serial3/3 225.94.155.69 YES NVRAM up down
Serial3/6 ... (3 Replies)
Hi all,
I have one problem on my sparcstation20, time stops when I turn off my station, where is the problem? do u think is the NVRAM is crashed? ( for example, I turn off my station at 11:00, when I turn on the next day, I found time on 22:20)!!!
please help me thank's for All (9 Replies)
Server need to have the OS reinstalled (5.10 SPARC) and I cannot get it to the OK prompt. I also do not have the ALOM password and I've tried several different methods to zero out the NVRAM but to no avail. There is no ALOM battery that I can pull. I'm connecting via Cutecom (like minicom) and... (18 Replies)
what is the requirements to install a new nvram for sun fire v890 server.
should I keep the same host id and mac address, or it doesn't matter the server will boot with the new nvram regardless to the host id and mac address. (4 Replies)
Hi Gurus,
I am totally confused :wall: . I have some questions regarding OBP,EEPROMand NVRAM, BIOS.
What actually are these how do they function and interact on a Sparc based solaris system.
What is ok> ?
What is system Firmware ?
How does the system startup?
Trying to google... (8 Replies)
Hello everybody.
I have a problem of this kind: After installation of FreeBSD, my Windows XP became unreachable. Boot from CDROM is impossible. The conclusion: BIOS was damaged by GParted or some other program. Question:
Are there any Unix means of updating (repairing) BIOS ?:wall: (11 Replies)
Guys, I'm fighting a real bitch of a problem. I've got 2 Tadpole Bullfrog sun4u laptops. One just lost is NVRAM battery - invalid IDPROM. The idprom is virtually all zeros. Clock ticks, NVRAM appears good...testing with and with battery out. Our damn Tadpole boys removed virtually every method of... (6 Replies)
I have a problem with a brand new Dell laptop. BioLinux was installed on it without making the necessary changes on BIOS. The installation was completed successfully but the BIOS system cant find the OS after rebooting the machine.
I have tried to modify the BIOS setting with no luck this far. I... (7 Replies)