config::model::models::lcdd::noritakevfd(3pm) [debian man page]
Config::Model::models::LCDd::NoritakeVFD(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::NoritakeVFD(3pm)NAME
Config::Model::models::LCDd::NoritakeVFD - Configuration class LCDd::NoritakeVFD
VERSION
version 2.021
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Device
device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1. Optional. Type uniline. upstream_default: '/dev/lcd'.
Size
Specifies the size of the LCD.Optional. Type uniline. default: '20x4'.
Brightness
Set the initial brightness Optional. Type integer. upstream_default: '1000'.
OffBrightness
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
integer. upstream_default: '0'.
Speed
set the serial port speed Optional. Type uniline. upstream_default: '9600,legal:1200,2400,9600,19200,115200'.
Parity
Set serial data parity Meaning: 0(=none), 1(=odd), 2(=even)Optional. Type integer. upstream_default: '0'.
Reboot
re-initialize the VFD Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
SEE ALSO
o cme
perl v5.14.2 2012-11-09 Config::Model::models::LCDd::NoritakeVFD(3pm)
Check Out this Related Man Page
Config::Model::models::LCDd::serialVFD(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::serialVFD(3pm)NAME
Config::Model::models::LCDd::serialVFD - Configuration class LCDd::serialVFD
VERSION
version 2.021
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Type
Specifies the displaytype. 0 NEC (FIPC8367 based) VFDs. 1 KD Rev 2.1. 2 Noritake VFDs (*). 3 Futaba VFDs 4 IEE S03601-95B 5 IEE
S03601-96-080 (*) 6 Futaba NA202SD08FA (allmost IEE compatible) 7 Samsung 20S207DA4 and 20S207DA6 8 Nixdorf BA6x / VT100 (* most should
work, not tested yet.)Optional. Type uniline. upstream_default: '0'.
use_parallel
"no" if display connected serial, "yes" if connected parallel. I.e. serial by default. Optional. Type uniline. upstream_default: 'no'.
Port
Number of Custom-Characters. default is display type dependent Custom-Characters=0 Portaddress where the LPT is. Used in parallel mode
only. Usual values are 0x278, 0x378 and 0x3BC.Optional. Type uniline. default: '0x378'.
PortWait
Set parallel port timing delay (us). Used in parallel mode only.Optional. Type integer. upstream_default: '2'.
Device
Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1. Optional. Type uniline. default: '/dev/ttyS1'.
Size
Specifies the size of the VFD.Optional. Type uniline. default: '20x2'.
Brightness
Set the initial brightness (4 steps 0-250, 251-500, 501-750, 751-1000)Optional. Type integer. upstream_default: '1000'.
OffBrightness
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive (4 steps 0-250,
251-500, 501-750, 751-1000)Optional. Type integer. upstream_default: '0'.
Speed
set the serial port speed Optional. Type enum. choice: '1200', '2400', '9600', '19200', '115200'. upstream_default: '9600'.
ISO_8859_1
enable ISO 8859 1 compatibility Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'.
SEE ALSO
o cme
perl v5.14.2 2012-11-09 Config::Model::models::LCDd::serialVFD(3pm)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)